Re: Centos 6.3 Network bnx2 Problem on HP DL360

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



> On Mar 19, 2013, at 9:32 AM, Woehrle Hartmut SBB CFF FFS (Extern) <hartmut.woehrle@xxxxxx> wrote:
>
> > Hello Mailing List
> > 
> > I got a severe network error message at a HP DL360 Server.
> > The kernel log says:
>
> If that's a DL360 G7 server, make sure you've applied all of the latest firmware patches from HP on it.  The G7 version has been 
> almost notorious for firmware issues with drive controllers, ethernet interfaces, etc.
> 
> Nate

Hello Nate

It is a G6 Server and the firmware is more or less the latest version:

# bash CP017428.scexe -c
MAC          PCI-ID              NIC
18A90576C820 14E4-1639-103C-7055 HP NC382i DP Multifunction Gigabit Server Adapter 

     (Installed)                (Available)              Interface
     Image      Version         Image      Version       eth0
----------------------------------------------------------------------
      BC        5.2.3           BC         5.2.3
      iSCSI     4.2.10           iSCSI      7.4.2                  <<<<<<<<<<<<< I don't use iSCSI at this maschine
      NCSI      2.0.6           NCSI       2.0.12


Hartmut
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux