OT: LSI SAS1068e / Perc6/iR RAID Health

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Is anybody here monitoring Dell SAS6/iR RAID health?
I have a mix of CentOS 5.9 and 6.3 installs on the PE1950s.

I'm finding drivers and Megaraid Storage Manager downloads via LSI's site,
but I'd prefer not to install a bunch of crapware.  All I need is the
proper LSI daemon which exports info via SNMP.

I've used check_sasraid_megaraid Nagios script [0] in the past for PERC5i
and PERC6i controllers in Dell PE2950s.  For 2950s I've only had to
install sas_snmp-3.11-0003.i386.rpm from LSI to get rolling.

I've tried installing parts from the MSM zip/tarball mess to install only
the lsi_mrdsnmpd daemon (lsi_mrdsnmpagent).

PERC5i = LSI 8048e (megaraid)
PERC6i = LSI SAS 1078 (megaraid)
SAS6/iR = LSI SAS 1068e (mptfusion)

[0] http://wleibzon.bol.ucla.edu/nagios/
[1] http://lists.centos.org/pipermail/centos/2009-November/085215.html


Thanks for any nudges in the right direction.
-- 
---~~.~~---
Mike
//  SilverTip257  //
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux