Hi,
I'm using a script:
#!/bin/bash
NETZWERK_DEVICE="eth0"
OUT_REMOTE_SPEED_MAX="7500kbit"
OUT_LOCAL_SPEED_MAX="80000kbit"
OUTGOING_SPEED_3="$1"
INCOMING_SPEED_1="$1"
INCOMING_SPEED_2="200kbit"
/sbin/tc qdisc del dev ${NETZWERK_DEVICE} root 2> /dev/null
/sbin/tc qdisc add dev ${NETZWERK_DEVICE} root handle 1:0 htb default 1
/sbin/tc class add dev ${NETZWERK_DEVICE} parent 1:0 classid 1:1 htb
rate ${OUT_REMOTE_SPEED_MAX}
This is OK in behavior.
Best regards
Helmut Drodofsky
Viele Grüße
i.V. Helmut Drodofsky
________________________________
Internet XS Service GmbH
Heßbrühlstraße 15
D-70565 Stuttgart
Fon : 0711/781941-0
Fax : 0711/781941-79
Geschäftsführer:
Dr. Roswitha Hahn-Drodofsky
HRB 21091 Stuttgart
USt.ID.: DE 190582774
Am 04.02.2013 05:28, schrieb Bent Terp:
> Hi all,
>
> I tried last week to do traffic shaping on a production system,
> object of the exercise was simply to throttle the outgoing traffic.
>
> tc qdisc add dev eth4 root tbf rate 300mbit burst 300kb latency 50ms
>
> But the server became rather instable, crashing repeatedly without
> anything in the logs.
>
> Can anybody spot glaring mistakes in the tc command above,
> or tell me what I should have done instead?
>
> with kind regards,
> Bent Terp
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
