Re: Newer SANE packages for 5.9 ??

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Sat, Jan 19, 2013 at 04:24:33PM -0800, Akemi Yagi wrote:
> On Sat, Jan 19, 2013 at 4:13 PM, Frank Cox <theatre@xxxxxxxxxxxxxxxxxxx> wrote:
> > On Sat, 19 Jan 2013 19:06:08 -0500
> > fred smith wrote:
> >
> >> I've been messing around with building sane from source, but have not
> >> been fully successful, yet, so thought before butchering my system any
> >> further I should ask if anyone has (or can point me to) newer Sane
> >> packages for EL5??
> >
> > This may be of interest to you.
> >
> > http://www.melvilletheatre.com/articles/canon-lide-110-scanner/
> 
> That would work fine with CentOS-6. But the OP is running EL5.
> 
> I got my LiDE 110/210 working that was connected to a Scientific Linux
> 5.7 box. The following procedure was from about 14 months ago, so some
> part might not be current (but hopefully get you started).
> 
> - Rebuild xsane 0.998
> - Rebuild sane-backends 1.0.19 (later version did not rebuild) -> not good
> - Compile sane-backends 1.0.23 from git (tarball) [1] and
>     manually copied genesys-related files from /usr/local/
> - At this point scanner was found by root but not by non-root
> - Edit /etc/udev/rules.d/50-udev.rules and change Mode from 0644 to 0666

So, if I understand this, the important part is building sane-backends 1.0.23
and manually dropping its genesys fileis into the RPM-based installation.

I've removed all the sane RPM files, and built sane-backends with prefix
pointing to /usr/local, then rebuilt xsane 0.998 and dropped it also into
/usr/local. at this point sane-find-scanner finds the device, but 
neither xsane nor scanimage -L will find it. I suspect I've just got
something not pointing to the files I've installed in /usr/local, but
think I need to go away from it for a few hours and let the brain recharge.

> 
> ACTION=="add", SUBSYSTEM=="usb_device", \
>         PROGRAM="/bin/sh -c 'K=%k; K=$${K#usbdev}; printf
> bus/usb/%%03i/%%03i $${K%%%%.*} $${K#*.}'", \
>         NAME="%c", MODE="0666"
> 
> [1] http://lists.alioth.debian.org/pipermail/sane-devel/2011-July/028852.html
> 
> Hope this helps,

I'm sure it will, once I digest it. Thanks a bunch!

-- 
-------------------------------------------------------------------------------
 .----    Fred Smith   /              
( /__  ,__.   __   __ /  __   : /     
 /    /  /   /__) /  /  /__) .+'           Home: fredex@xxxxxxxxxxxxxxxxxxxxxx 
/    /  (__ (___ (__(_ (___ / :__                                 781-438-5471 
-------------------------------- Jude 1:24,25 ---------------------------------
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux