I have a server running Centos4. I found I was seeing some network
problems so I tried "route" and found there was no routing. I thought
reboot would solve it but it didn't. I had to manually enter a route to
the default gateway, there is still no route to the loopback interface.
How is this possible? I thought there was default routes built into the
kernel, taken from ifcfg-eth0.
Is there an easy way to fix this? Thanks for any advice.
# cat /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=pbx.mysite.home
gateway=192.168.200.1
# cat /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
IPADDR=192.168.200.11
BROADCAST=192.168.200.255
NETMASK=255.255.255.0
NETWORK=192.168.200.0
HWADDR=00:30:48:80:EE:0C
ONBOOT=yes
TYPE=Ethernet
--
Chris Mason
NetConcepts
(264) 497-5670 Fax: (264) 497-8463
Int: (305) 704-7249 Fax: (815)301-9759
Cell: 264-235-5670
Yahoo IM: netconcepts_anguilla@xxxxxxxxx
