Re: X/Display resolution configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On Mon, 08 Oct 2012 16:51:17 -0500
Mike Watson wrote:

> Login as normal via the linux login screen.  The display is 1280x1024. I 
> use the system config to change the display to 1600x900.  All works 
> until I logout. The next time I log in, the display has reverted to 
> 1280X1024. It's as if, when I change the display to the higher value, 
> it's not being retained---only for the duration of that session.

> >> Screen 0: minimum 320 x 200, current 1600 x 900, maximum 8192 x 8192
> >> VGA1 connected 1600x900+0+0 (normal left inverted right x axis y axis)
> >> 440mm x 250mm
> >>      1600x900       60.0*+

Does this command work?

xrandr --output VGA-1 --mode 1600x900x32

If so, you could add it to /etc/gdm/Init/Default.  I think it will work if you
add it just before the first gdmwhich() line, but you might have to do some
experimenting.

-- 
MELVILLE THEATRE ~ Real D 3D Digital Cinema ~ www.melvilletheatre.com
www.creekfm.com - FIFTY THOUSAND WATTS of POW WOW POWER!
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux