On Fri, 22 Jun 2012, Steve Brooks wrote:
> On Fri, 22 Jun 2012, m.roth@xxxxxxxxx wrote:
>
>> Steve Brooks wrote:
>>> On Fri, 22 Jun 2012, m.roth@xxxxxxxxx wrote:
>>>
>>>> Steve Brooks wrote:
>>>>> On Fri, 22 Jun 2012, m.roth@xxxxxxxxx wrote:
>>>>>> Steve Brooks wrote:
>>>>>>>
>>>>>>> I have a SATA PCIe 6Gbps 4 port controller card made by Startech. The
>>>>>>> kernel (Linux viz1 2.6.32-220.4.1.el6.x86_64) sees it as
>>>>>>>
>>>>>>> Marvell Technology Group Ltd. 88SE9123
>>>>>>>
>> Is this your card?
>
>
> Hi Mark,
>
> Yes that is the very card, the page says the chipset is Marvell 88SE9128
> but "lspci" shows
>
> Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller
It is odd because the kernel reports it as "88SE9123" the web page says it
is "88SE9128" as does the manual supplied with the card. Now the
motherboard already has an onboard Marvell "88SE9128" controller which is
correctly identified by the kernel and works properly so I know the
correct divers are in the kernel but the Startech card does not seem to be
using them.
[root@viz1 ~]# lspci | grep SATA
00:1f.2 SATA controller: Intel Corporation Patsburg 6-Port SATA AHCI Controller (rev 05)
04:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller (rev 11)
05:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9123 PCIe SATA 6.0 Gb/s controller (rev 11)
0f:00.0 SATA controller: ASMedia Technology Inc. ASM1062 Serial ATA Controller (rev 01)
10:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9128 PCIe SATA
6 Gb/s RAID controller with HyperDuo (rev 11)
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
