OK, I'm about 90% sure that I've corrected the boot loader situation
with RAID-1 and the second hard drive. I haven't tested the correction,
but here's what I did:
Examined the grub.conf file and noticed that hd0 uses (hd0,1), so
what followed was
grub
grub> device (hd1) /dev/sdc
grub> root (hd1,1)
grub> setup (hd1)
<after receiving the successful message>
grub> quit
I didn't rebuild the boot loader on /dev/sda because it is working (if
it ain't broke don't fix it).
My situation is that I'm using 4 - 1 TB hard drives and I used the
following pattern:
/dev/sda | /dev/sdc = First Raid -1 volume
/dev/sdb | /dev/sdd = Second Raid-1 volume
Thanks all for the suggestions and thoughts!
Gene
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
