Re: Host Machine and Iptables problem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On 05/01/2012 02:03 AM, Barry Brimer wrote:
>> Yes, I thought the same but my confusion is that I don't see any rules of
>> PREROUTING and POSTROUTING in the /etc/sysconfig/iptables file.
>>
>> [root@VS01]# cat /etc/sysconfig/iptables
>> # Firewall configuration written by system-config-firewall
>> # Manual customization of this file is not recommended.
>> *filter
>> :INPUT ACCEPT [0:0]
>> :FORWARD ACCEPT [0:0]
>> :OUTPUT ACCEPT [0:0]
>> -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT
>> -A INPUT -p icmp -j ACCEPT
>> -A INPUT -i lo -j ACCEPT
>> -A INPUT -m state --state NEW -m tcp -p tcp --dport 22 -j ACCEPT
>> -A INPUT -m state --state NEW -m udp -p udp --dport 631 -j ACCEPT
>> -A INPUT -m state --state NEW -m udp -p udp --dport 5353 -d 224.0.0.251 -j
>> ACCEPT
>> -A INPUT -m state --state NEW -m tcp -p tcp --dport 631 -j ACCEPT
>> -A INPUT -m state --state NEW -m udp -p udp --dport 631 -j ACCEPT
>> -A INPUT -j REJECT --reject-with icmp-host-prohibited
>> -A FORWARD -j REJECT --reject-with icmp-host-prohibited
>> COMMIT
>>
>>
>> But when I check the command iptables -L -t nat I can see the NAT rules
>>
>> [root@VS01]# iptables -L -t nat
>> Chain PREROUTING (policy ACCEPT)
>> target     prot opt source               destination
>>
>> Chain POSTROUTING (policy ACCEPT)
>> target     prot opt source               destination
>> MASQUERADE  tcp  --  192.168.122.0/24    !192.168.122.0/24    masq ports:
>> 1024-65535
>> MASQUERADE  udp  --  192.168.122.0/24    !192.168.122.0/24    masq ports:
>> 1024-65535
>> MASQUERADE  all  --  192.168.122.0/24    !192.168.122.0/24
>> MASQUERADE  tcp  --  192.168.100.0/24    !192.168.100.0/24    masq ports:
>> 1024-65535
>> MASQUERADE  udp  --  192.168.100.0/24    !192.168.100.0/24    masq ports:
>> 1024-65535
>> MASQUERADE  all  --  192.168.100.0/24    !192.168.100.0/24
>>
>> Chain OUTPUT (policy ACCEPT)
>> target     prot opt source               destination
>>
>> am I missing something?
> Maybe .. do you have IPv4 forwarding enabled?  What is the output of
> "cat /proc/sys/net/ipv4/ip_forward" ?? If it is 0, then edit
> /etc/sysctl.conf .. find net.ipv4.ip_forward .. set it to 1 and then run
> (as root) sysctl -p
>
In the Host machine the ip_forward is 1
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux