Re: probleme with my wifi card on centos 6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Le 2012-01-03 22:14, fakessh a écrit :
> Le 2012-01-03 03:35, fakessh a écrit :
>> Le 2012-01-03 02:44, Ljubomir Ljubojevic a écrit :
>>> On 01/03/2012 02:33 AM, fakessh wrote:
>>>> Le 2012-01-03 02:21, Ljubomir Ljubojevic a écrit :
>>>>> On 01/03/2012 02:15 AM, fakessh @ wrote:
>>>>>>
>>>>>> Le mardi 03 janvier 2012 à 02:02 +0100, fakessh a écrit :
>>>>>>> Le 2012-01-03 00:15, Ljubomir Ljubojevic a écrit :
>>>>>>>> On 01/02/2012 09:58 PM, fakessh wrote:
>>>>>>>>> I am writing to report a problem I encounter with my wireless
>>>>>>>>> card
>>>>>>>>> realtek 8150
>>>>>>>>> the installer does not detect the device so the
>>>>>>>>> /etc/sysconfig/network-script/ifcfg-wlan0 is absent
>>>>>>>>>
>>>>>>>>
>>>>>>>> Realtek 8150 is USB LAN NIC, not the wireless one. Drivers for
>>>>>>>> it
>>>>>>>> are
>>>>>>>> already inside the Kernel:
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> 
>>>>>>>> http://www.realtek.com/products/productsView.aspx?Langid=1&PNid=14&PFid=8&Level=5&Conn=4&ProdID=21
>>>>>>>>
>>>>>>>>
>>>>>>>> Please post output of the 'lspci -v" command, mainly those
>>>>>>>> device
>>>>>>>> without anything in "Kernel driver in use:" (or do not have
>>>>>>>> that
>>>>>>>> line
>>>>>>>> at
>>>>>>>> all).
>>>>>>>
>>>>>>>
>>>>>>> this my output
>>>>>>> root@localhost ~]# lspci -v | egrep Ethernet
>>>>>>> 00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
>>>>>>> 01:06.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
>>>>>>> RTL-8185
>>>>>>> IEEE 802.11a/b/g Wireless LAN Controller (rev 20)
>>>>>
>>>>> So it is not RTL-8150, but RTL-8185
>>>>>
>>>>>>>
>>>>>>> I connect with the ethernet port but I can not turn on the
>>>>>>> wireless
>>>>>>> card
>>>>>>>
>>>>>>> all testimonials are welcome
>>>>>>
>>>>>>
>>>>>> the card appears sold as a wireless trendnet TEW 423PI
>>>>>
>>>>> The chip is all we should need.
>>>>>
>>>>> Next we is DeviceID so we can match it. run:
>>>>>
>>>>> lspci -n | grep '01:06.0'
>>>>
>>>> output of this command
>>>> root@localhost ~]# lspci -n | grep '01:06.0'
>>>> 01:06.0 0200: 10ec:8185 (rev 20)
>>>>
>>>>
>>>
>>> I feared so. ElRepo does not have it, nor any other repository.
>>>
>>> But there is Realtek's source you can compile:
>>>
>>>
>>> 
>>> http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=1&PFid=1&Level=6&Conn=5&DownTypeID=3&GetDown=false&Downloads=true#RTL8185L
>>>
>>> Also look at http://rtl8180-sa2400.sourceforge.net/
>>>
>>> You can also ask ElRepo developers that they build an kmod-package
>>> from
>>> that source.
>>
>>
>> I was not able to set up the wireless interface despite the driver.
>> I'll open an issue on the bugtracker of elrepo
>
>
> So I think do a post on the bugtracker of elrepo to ask
> the creation of a new kmod-*
>
> So I tried to compile the driver provided
> in [1]
>
> module appears to load properly
> Still I have failed to create the wireless interface
> despite my attempts with the file ifcfg-wlan0  tape provided I
> to try to load ifup the interface without success
>
> I do not know how I do
>
>
> [1]
> 
> http://www.realtek.com/products/productsView.aspx?Langid=1&PNid=14&PFid=8&Level=5&Conn=4&ProdID=21


link driver error
[1]
http://www.realtek.com/downloads/downloadsView.aspx?Langid=1&PNid=1&PFid=1&Level=6&Conn=5&DownTypeID=3&GetDown=false&Downloads=true#RTL8185L

-- 
  http://pgp.mit.edu:11371/pks/lookup?op=get&search=0x092164A7
  gpg --keyserver pgp.mit.edu --recv-key 092164A7

  http://urlshort.eu fakessh @
  http://gplus.to/sshfake
  http://gplus.to/sshswilting
  http://gplus.to/john.swilting
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux