Fwd: centos Wireless - Broadcom BCM4313

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Dear All,

I'm trying to configure wireless card on a Dell Vostro 1540.

I had a look at this site : http://wiki.centos.org/HowTos/Laptops/Wireless/Broadcom?action=show

wireless card :# /sbin/lspci | grep Broadcom
12:00.0 Network controller: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)

I decided to follow the ELrepo instructions suggested on the site :

                           http://elrepo.org/tiki/wl-kmod

because it would give me a clear and present rpm that I can use on different machines and that will survive kernel updates.

This all goes down without error messages.

After installing, there is a new entry in /etc/udev/rules.d/70-persistent-net.rules :

# PCI device 0x14e4:0x4727 (wl)
SUBSYSTEM=="net", ACTION=="add", DRIVERS=="?*", ATTR{address}=="94:39:e5:dc:3a:cf", ATTR{type}=="1", KERNEL=="eth*", NAME="eth1"

and there is now a blacklist-Broadcom.conf in /etc/modprobe.d/:

blacklist b43
blacklist b43legacy
blacklist bcm43xx
blacklist ssb

So I think the driver works and the blacklist - issue that is reported on different sites is ok.

I then made an entry in /etc/sysconfig/network-scripts:

vi ifcfg-eth1

DEVICE="eth1"
#BOOTPROTO="dhcp"
HWADDR="94:39:e5:dc:3a:cf"
NM_CONTROLLED="yes"
ONBOOT="yes"
TYPE=Wireless

*The problem is*  I'm not seeing any wireless networks.

Eth1 seems to try to get an adress via dhcp and then exits.

And it is listed in the gui as wired network...

[root@wduerloo ~]# dmesg | tail -n15
lib80211: common routines for IEEE802.11 drivers
lib80211_crypt: registered algorithm 'NULL'
wl: module license 'unspecified' taints kernel.
Disabling lock debugging due to kernel taint
wl 0000:12:00.0: PCI INT A ->  GSI 17 (level, low) ->  IRQ 17
wl 0000:12:00.0: setting latency timer to 64
lib80211_crypt: registered algorithm 'TKIP'
eth1: Broadcom BCM4727 802.11 Hybrid Wireless Controller 5.100.82.112
eth1: no IPv6 routers present
eth1: no IPv6 routers present
eth1: no IPv6 routers present
eth1: no IPv6 routers present
eth1: no IPv6 routers present

on restarting network manager this is in /var/log/messages :

Nov  8 07:45:54 wduerloo dhclient[11719]: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 6 (xid=0x3c613d0e)
Nov  8 07:46:00 wduerloo dhclient[11719]: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 12 (xid=0x3c613d0e)
Nov  8 07:46:12 wduerloo dhclient[11719]: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 14 (xid=0x3c613d0e)
Nov  8 07:46:26 wduerloo dhclient[11719]: DHCPDISCOVER on eth1 to 255.255.255.255 port 67 interval 12 (xid=0x3c613d0e)
Nov  8 07:46:33 wduerloo NetworkManager[11711]:<warn>  (eth1): DHCPv4 request timed out.
Nov  8 07:46:33 wduerloo NetworkManager[11711]:<info>  (eth1): canceled DHCP transaction, DHCP client pid 11719
Nov  8 07:46:33 wduerloo NetworkManager[11711]:<info>  Activation (eth1) Stage 4 of 5 (IP4 Configure Timeout) scheduled...
Nov  8 07:46:33 wduerloo NetworkManager[11711]:<info>  Activation (eth1) Stage 4 of 5 (IP4 Configure Timeout) started...
Nov  8 07:46:33 wduerloo NetworkManager[11711]:<info>  Activation (eth1) Stage 5 of 5 (IP Configure Commit) scheduled...
Nov  8 07:46:33 wduerloo NetworkManager[11711]:<info>  Activation (eth1) Stage 4 of 5 (IP4 Configure Timeout) complete.
Nov  8 07:46:33 wduerloo NetworkManager[11711]:<info>  Activation (eth1) Stage 5 of 5 (IP Configure Commit) started...
Nov  8 07:46:33 wduerloo NetworkManager[11711]:<info>  Activation (eth1) Stage 5 of 5 (IP Configure Commit) failed (no IP configuration found)
Nov  8 07:46:33 wduerloo NetworkManager[11711]:<info>  (eth1): device state change: 7 ->  9 (reason 5)
Nov  8 07:46:33 wduerloo NetworkManager[11711]:<info>  Marking connection 'Auto eth1' invalid.
Nov  8 07:46:33 wduerloo NetworkManager[11711]:<warn>  Activation (eth1) failed.
Nov  8 07:46:33 wduerloo NetworkManager[11711]:<info>  Activation (eth1) Stage 5 of 5 (IP Configure Commit) complete.
Nov  8 07:46:33 wduerloo NetworkManager[11711]:<info>  (eth1): device state change: 9 ->  3 (reason 0)
Nov  8 07:46:33 wduerloo NetworkManager[11711]:<info>  (eth1): deactivating device (reason: 0).

I think I need  to configure something else.

I know a lot of you guys don't like NetworkManager but because it's a laptop I would like to use it.

I hope I gave enough info, any help would be greatly appreciated.

greetings, James.

Centos is here to stay, I'm sure.

P.S. I don't have an English spell checker on this machine, sorry for language mistakes :=)









Johan Vermeulen
IT-medewerker
Caw De Kempen
johan.vermeulen@xxxxxxxxxxxxxx
0479.82.01.41

Opensource Software is the future.



_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux