Re: HP Smart Array B110i SATA RAID Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



On 10/24/11 3:04 AM, Richard Gliebe wrote:
> I'm trying to install CentOS 6.0 64bit on a HP ProLiant ML110 G7 with a
> HP Smart Array B110i SATA RAID Controller.
>
> One logical drive (RAID 1+0) on the RAID Controller is already build.
>
> CentOS Installation can't find the logical Drive, but it shows me the
> zwo physical drives (sda+sdb). After searching the web, I found
> following hints:

wild guess says, that isn't really a raid controller, that its a 
fake-raid, such as an Intel Matrix, where the 'raid' is done purely in 
the BIOS and the Windows Driver.

you're better off reconfiguring that for JBOD in the BIOS, and letting 
Linux see the physical disks (which it does, anywayas), and implementing 
mdraid mirroring in Linux natively.



-- 
john r pierce                            N 37, W 122
santa cruz ca                         mid-left coast

_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux