Re: Live CD boot for KVM guest. How?

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Vreme: 10/19/2011 06:34 PM, Müfit Eribol piše:
> Hi,
>
> My host and guest are CentOS 6. The guest is going to be a web server in
> production. I am trying to resize (extend) of the base partition of my
> guest.  But I can of course start the installation of CentOS 6 guest all
> over again with a larger image size. However, just for the sake of
> better understanding I an trying to solve things not to be end up in a
> dead end after some years.
>
> 1. I created a guest CentOS 6 with 12G total disk (on a iscsi drive). No
> Desktop, just for terminal use. No LVM, just a simple basic partitioning.
> 2. Later I wanted to increase the size of total image to 200G.
> 3. I managed to resize the image to 200G on my iscsi drive. So, there is
> 188G unallocated/unformatted volume within the guest image.
>
> Now, the hardest part. I have to resize the partition. I have been
> trying to find a way to do that. A search on Google showed that GParted
> is tool to do that. I had to install all Desktop and X as Gparted is a
> GUI tool. Installed vncserver. Then, I found out that GParted can not
> resize the live guest. So, I downloaded GParted Live CD.
>
> Now, the questions:
>
> 1. If it was a physical machine I would boot from the CD. If I can boot
> it from host CDROM but then how should I operate on a specific guest?
> What is the easiest way to access GUI of the guest if I boot from Live CD.
> 2. I am wondering if a simple LVM route at the beginning would be
> preferred. Changing size of the iscsi volume on my NAS is easy. I
> thought there was no need for more complication, so went with basic
> /boot / and swap partitions. Is resizing partitions for LVM easier than
> basic partitioning (without LVM)?
> 3. Is there a specific tool in KVM suit which performs resizing
> partition within the image? Or as I prefer command line tools, is there
> a way to achieve resizing without any graphical tool like GParted? With
> GParted I had to install all the X and Gnome files, vncserver which
> otherwise I don't need.
>
> I would appreciate any information/hint/experience.
>
> All the best.
Hi.

My view is:

a) Use LVM so you can manipulate size of partition(s). Resizing etx4 
partitions is horrible job, long and dangerous.

b) You can mount ISO image file of any CD via Guests VirtualCD, no need 
to mess with physical CD/DVD drives. There is System Rescue CD, CentOS 
LiveCD (I have one 5.3 with mdadm raid support and bunch of tools,I will 
soon be making 6.1 version) or Hiren's Boot CD - Parted. Root partition 
needs offline resize since extX partitions can not be mounted at the 
time of the resizing.

c) All text-based resize tools require higher knowledge and/or 
experience, like alignment to sectors and similar mambo-jumbo. When you 
need to make it happen on production server without experimentation and 
you have done it only once 3 years ago it IS mambo-jumbo.

d) As far as I know, KVM can not mount virtual hard drives, so meesing 
with them is not an option, unless you use "raw" partition on the Host 
(still haven't tried it).

-- 

Ljubomir Ljubojevic
(Love is in the Air)
PL Computers
Serbia, Europe

Google is the Mother, Google is the Father, and traceroute is your
trusty Spiderman...
StarOS, Mikrotik and CentOS/RHEL/Linux consultant
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos



[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux