Have you checked the cables you are using ? On Tue, Sep 27, 2011 at 6:09 AM, Benjamin Smith <lists@xxxxxxxxxxxxxxxxxx>wrote: > On Monday, September 26, 2011 12:36:19 PM m.roth@xxxxxxxxx wrote: > > a) have you checked > > /var/log/message for memory or drive errors? > > Looked through the logs, there's *nothing* I can find that's out of sorts. > When > the IO problem happens, nothing can be written. > > > Maybe memtest86? > > I replaced all the RAM from working/non-working machines. In several cases > where replacing RAM resolved the issue, memtest didn't indicate any > problems, > so I'm not inclined to trust it. > > > b) diffed > > dmesg between working and dying machines? > > Other than the IRQ difference noted earlier, visual scan revealed no > differences > involving mpt2. > > > > > One more thing: should we assume you were trying to do things, when they > > die, from the console? I ask because I note that you're using the e1000e > > driver, which was just the subject of a thread here. > > I'm familiar with the stale EL6 e1000e driver. I've been using one included > by > yum from elrepo. Manually downloaded RPM so that ethernet works before > doing a > yum -y update. I've been assuming this was unrelated. > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > > _______________________________________________ > CentOS mailing list > CentOS@xxxxxxxxxx > http://lists.centos.org/mailman/listinfo/centos > _______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos