Hardware RAID Controller

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



I use one of my 8500-8s in a 32bit slot on an MSI Dual PIII motherboard 
with no problems...
You just have to make sure the 64bit part of the connector does not foul 
on any motherboard parts as it hangs over the edge of the 32bit slot...


Regards

Pete


Joshua Baker-LePain wrote:

>On Wed, 11 May 2005 at 8:58pm, Lee W wrote
>
>  
>
>>Thanks for all the advise people have offered.  I've been checking out 
>>all the 3ware cards available and believe that the Escalade 7506-4LP 
>>would be best for me. 
>>
>>However I've noticed that it is a 64-Bit PCI Card.  Can I still use this 
>>in a 32-Bit Slot.  I think that I read something once that said it would 
>>work but at a reduced bandwidth.
>>
>>    
>>
>
>Page 16 of the Installation Guide says a 32bit slot is fine.
>
>  
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.centos.org/pipermail/centos/attachments/20050511/4f345706/attachment.htm

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux