On Mon, Jul 18, 2011 at 6:59 PM, Kaushal Shriyan
<kaushalshriyan@xxxxxxxxx> wrote:
> On Fri, Jul 15, 2011 at 11:47 AM, John R Pierce <pierce@xxxxxxxxxxxx> wrote:
>> On 07/14/11 10:56 PM, Kaushal Shriyan wrote:
>>> I have HP DL 180 G6 2U Rack Server with HP Smart Array Controller Card
>>> B110i Onboard SATA Controller Chipset. This server has 4 * 500 GB SATA
>>> HDD have configured RAID 1+0 and it shows Single Logical Drive of 940
>>> GB Hard Disk in the RAID BIOS.
>>
>> the SmartArray 110i is simply Intel "Matrix" fake raid. The hardware is
>> purely basic plain SATA JBOD, but the BIOS and driver implement the raid
>> behind the systems back.
>>
>> Configure the BIOS for AHCI native SATA, and use linux native raid. See
>> http://wiki.centos.org/HowTos/SoftwareRAIDonCentOS5?highlight=%28RAID%29
>>
>>
>> --
>> john r pierce N 37, W 122
>> santa cruz ca mid-left coast
>>
>> _______________________________________________
>> CentOS mailing list
>> CentOS@xxxxxxxxxx
>> http://lists.centos.org/mailman/listinfo/centos
>>
>
> Hi Again,
>
> I did some changes, i just created two partitions / and swap using the
> Anaconda Installer, it worked fine after loading boot loader GRUB and
> then after it stopped at Kernel Panic.
>
> device—mapper: dm—raid15: initialized v0.25941
> Waiting for driver initialization
> Scanning and configuring dnraid supported devices
> Trying to resume from (LABEL=SWAP-sda2)
> Unable to access resume device (L‘*wmVgW_¢;"1iZ)
> Creating root device.
> Hounting root filesystem.
> EXT3—fs error (device sdc1) : ext3_check_descriptors: Block bitmap for group 296
> not in group (block 231211688)!
> EXT3~fs1 group descriptors corrupted!
> mount: error mounting /dev/root on /sysroot as ext3: Invalid argument
> Setting up other filesystems.
> Setting up new root fs
> setuproot: moving /dev failed: No such file or directory
> no fstab.sys, mounting internal defaults
> setuproot: error mounting /proc: No such file or directory
> setuproot: error mounting /sys: No such file or directory
> Suitching to new root and running init.
> unmounting old /dev
> unmounting old /proc
> unmounting old /sys
> suitchrootr mount failed: No such file or directory
> Kernel panic — not syncing: Attempted to kill init!
>
> Please suggest further. is there a way to create customized initrd for
> this default kernel available on CentOS 5.6
>
> Thanks and Regards,
>
> Kaushal
>
Hi Again,
I have read this on the forums and it explained as below.
Probably need to get that module into your initrd. The computer, upon
booting, loads a kernel image and an initial ramdisk. the latter is a
compressed filesystem image that the bootloader just maps into memory,
and it holds a number of kernel modules and helper programs for the
kernel you are booting. if it does not contain the kernel module
that's driving your RAID controller, the kernel won't ever be able to
recognize your disk array, because it
lacks the proper driver for it that's why the initrd's helper programs
are panicking - they are trying to mount a crucial filesystem from a
device which just isn't there it cannot continue, and bails with a
big, fat error
Somehow need to include the driver you loaded from the USB thumb drive
during installation during booting your system (most probably from
within
the initrd) . probably need to get that module into the initrd.
Please guide/suggest further.
Regards,
Kaushal
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
