Hi all,
I've got two gigabit ethernet interfaces bonded in CentOS 5.6. I've
set "miimode=1000" and I've tried "mode=" 0, 4 and 6. I've not been able
to get better than 112MB/sec, which is the same as the non-bonded
interfaces.
My config files are:
===
cat /etc/sysconfig/network-scripts/ifcfg-{eth1,eth2,bond0}
# SN1
HWADDR=00:30:48:fd:26:71
DEVICE=eth1
BOOTPROTO=none
MASTER=bond0
SLAVE=yes
# SN2
HWADDR=00:1B:21:87:80:CE
DEVICE=eth2
BOOTPROTO=none
MASTER=bond0
SLAVE=yes
# Bonded interfaces for Storage Network
DEVICE=bond0
IPADDR=192.168.21.80
NETMASK=255.255.255.0
ONBOOT=yes
BOOTPROTO=none
USERCTL=no
BONDING_OPTS="miimon=1000 mode=0"
===
I'm running benchmarks using iperf (.90 is the second machine with a
matching bonded connection):
===
iperf -f M -c 192.168.21.90
------------------------------------------------------------
Client connecting to 192.168.21.90, TCP port 5001
TCP window size: 0.02 MByte (default)
------------------------------------------------------------
[ 3] local 192.168.21.80 port 35728 connected with 192.168.21.90 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 1086 MBytes 109 MBytes/sec
===
This is the speed a non-bonded interface:
===
iperf -f M -c 192.168.22.90
------------------------------------------------------------
Client connecting to 192.168.22.90, TCP port 5001
TCP window size: 0.02 MByte (default)
------------------------------------------------------------
[ 3] local 192.168.22.80 port 57475 connected with 192.168.22.90 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 1125 MBytes 112 MBytes/sec
===
The switch is a D-Link DGS-3100, which is a managed switch that I
believe is capable of 801.3ad (for mode=4).
Any advice?
--
Digimer
E-Mail: digimer@xxxxxxxxxxx
Freenode handle: digimer
Papers and Projects: http://alteeve.com
Node Assassin: http://nodeassassin.org
"I feel confined, only free to expand myself within boundaries."
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
