Re: bond empty after reboot

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Greetings

On Mon, May 16, 2011 at 6:50 PM, wessel van der aart
<wessel@xxxxxxxxxxxxx> wrote:
> Hi all,
>
> ifcfg-bond0:
> DEVICE=bond0
> IPADDR=xxx.xx.x.xx
> NETMASK=255.255.255.0
> NETWORK=xxx.xx.x.xx
> BROADCAST=xxx.xx.x.xx
> GATEWAY=
> ONBOOT=yes
> BOOTPROTO=none
> USERCTL=no
> BONDING_MODULE_OPTS='mode=802.3ad miimon=80'
> TYPE=BOND
>
>
> ifcfg-eth0 (same for eth1,eth2 & eth3):
> # Intel Corporation 82576 Gigabit Network Connection
> DEVICE=eth0
> ONBOOT=yes
> BOOTPROTO=none
> USERCTL=no
> MASTER=bond0
> SLAVE=YES
> TYPE=ethernet


Have you rtried removing tins line.?

usel locate bonding.txt it provides a concise and correct way

> HWADDR=xx:xx:xx:xx:xx:xx
>
-- 
Regards,

Rajagopal
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux