Hello,
yesterday night I had a problem with
my server located at a hoster (strato.de).
I couldn't ssh to it and over the remote serial console
I saw "out of memory" errors (sorry, don't have the text).
Then I had reinstall CentOS 5.5/64 bit + all my setup (2h work),
because I have a contract with a social network and
they will shut down my little card game if it is not reponding.
Now the server seems to work ok,
but I'm worried about those /var/log/message:
kernel: INFO: task md1_resync:9770 blocked for more than 120 seconds.
kernel: "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables
this message.
kernel: md1_resync D ffff81011edba820 0 9770 55
9768 (L-TLB)
kernel: ffff810083259d70 0000000000000046 0000000000000000 ffff81011ea66e0c
kernel: ffff81011ea66c0c 000000000000000a ffff81011ccc27a0 ffff81011edba820
kernel: 000011d56f2a0b28 000000000000100f ffff81011ccc2988 000000028008b4d7
kernel: Call Trace:
kernel: [<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
kernel: [<ffffffff8021af66>] md_do_sync+0x1d8/0x833
kernel: [<ffffffff8008ca47>] enqueue_task+0x41/0x56
kernel: [<ffffffff8008cab2>] __activate_task+0x56/0x6d
kernel: [<ffffffff8008c897>] dequeue_task+0x18/0x37
kernel: [<ffffffff80062ff8>] thread_return+0x62/0xfe
kernel: [<ffffffff800a0b5f>] autoremove_wake_function+0x0/0x2e
kernel: [<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
kernel: [<ffffffff8021b93a>] md_thread+0xf8/0x10e
kernel: [<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
kernel: [<ffffffff8021b842>] md_thread+0x0/0x10e
kernel: [<ffffffff8003296e>] kthread+0xfe/0x132
kernel: [<ffffffff8005dfb1>] child_rip+0xa/0x11
kernel: [<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
kernel: [<ffffffff80032870>] kthread+0x0/0x132
kernel: [<ffffffff8005dfa7>] child_rip+0x0/0x11
kernel:
The /var/log/mcelog is empty.
# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 20G 1.4G 18G 8% /
/dev/md3 176G 754M 166G 1% /var
/dev/md0 993M 30M 913M 4% /boot
/dev/md2 263G 352M 250G 1% /home
tmpfs 2.0G 0 2.0G 0% /dev/shm
Does anybody please have an advice? :-(
(Besides "contact or change" your hoster, because it doesn't work).
I have 2 disks in "software raid" at that machine,
but not much experience with RAID. My dmesg is below.
I could reboot the machine in a "rescue mode",
but I'm not sure which commands to try there.
Thank you
Alex
Linux version 2.6.18-194.32.1.el5 (mockbuild@xxxxxxxxxxxxxxxxxxxx)
(gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Wed Jan 5
17:52:25 EST 2011
Command line: root=/dev/md1 console=tty0 console=ttyS0,57600
BIOS-provided physical RAM map:
BIOS-e820: 0000000000010000 - 000000000009f000 (usable)
BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000ddfb0000 (usable)
BIOS-e820: 00000000ddfb0000 - 00000000ddfbe000 (ACPI data)
BIOS-e820: 00000000ddfbe000 - 00000000ddfe0000 (ACPI NVS)
BIOS-e820: 00000000ddfe0000 - 00000000ddfee000 (reserved)
BIOS-e820: 00000000ddff0000 - 00000000de000000 (reserved)
BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000120000000 (usable)
DMI present.
ACPI: RSDP (v000 ACPIAM ) @ 0x00000000000faf80
ACPI: RSDT (v001 032510 RSDT1503 0x20100325 MSFT 0x00000097) @
0x00000000ddfb0000
ACPI: FADT (v002 032510 FACP1503 0x20100325 MSFT 0x00000097) @
0x00000000ddfb0200
ACPI: MADT (v001 032510 APIC1503 0x20100325 MSFT 0x00000097) @
0x00000000ddfb0390
ACPI: MCFG (v001 032510 OEMMCFG 0x20100325 MSFT 0x00000097) @
0x00000000ddfb0400
ACPI: OEMB (v001 032510 OEMB1503 0x20100325 MSFT 0x00000097) @
0x00000000ddfbe040
ACPI: HPET (v001 032510 OEMHPET 0x20100325 MSFT 0x00000097) @
0x00000000ddfb48c0
ACPI: SSDT (v001 A M I POWERNOW 0x00000001 AMD 0x00000001) @
0x00000000ddfb4900
ACPI: DSDT (v001 A96B3 A96B3210 0x00000210 INTL 0x20051117) @
0x0000000000000000
No NUMA configuration found
Faking a node at 0000000000000000-0000000120000000
Bootmem setup node 0 0000000000000000-0000000120000000
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
disabling kdump
On node 0 totalpages: 1022763
DMA zone: 2627 pages, LIFO batch:0
DMA32 zone: 890856 pages, LIFO batch:31
Normal zone: 129280 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 0:4 APIC version 16
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
Processor #1 0:4 APIC version 16
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
Processor #2 0:4 APIC version 16
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
Processor #3 0:4 APIC version 16
ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Setting APIC routing to physical flat
ACPI: HPET id: 0x8300 base: 0xfed00000
Using ACPI (MADT) for SMP configuration information
Nosave address range: 000000000009f000 - 00000000000a0000
Nosave address range: 00000000000a0000 - 00000000000e4000
Nosave address range: 00000000000e4000 - 0000000000100000
Nosave address range: 00000000ddfb0000 - 00000000ddfbe000
Nosave address range: 00000000ddfbe000 - 00000000ddfe0000
Nosave address range: 00000000ddfe0000 - 00000000ddfee000
Nosave address range: 00000000ddfee000 - 00000000ddff0000
Nosave address range: 00000000ddff0000 - 00000000de000000
Nosave address range: 00000000de000000 - 00000000ff700000
Nosave address range: 00000000ff700000 - 0000000100000000
Allocating PCI resources starting at e0000000 (gap: de000000:21700000)
SMP: Allowing 4 CPUs, 0 hotplug CPUs
Built 1 zonelists. Total pages: 1022763
Kernel command line: root=/dev/md1 console=tty0 console=ttyS0,57600
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 32768 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Checking aperture...
CPU 0: aperture @ 4000000 size 32 MB
Aperture too small (32 MB)
No AGP bridge found
Your BIOS doesn't leave a aperture memory hole
Please enable the IOMMU option in the BIOS setup
This costs you 64 MB of RAM
Mapping aperture over 65536 KB of RAM @ 4000000
Nosave address range: 0000000004000000 - 0000000008000000
ACPI: DMAR not present
Memory: 4016200k/4718592k available (2575k kernel code, 144564k
reserved, 1304k data, 212k init)
Calibrating delay loop (skipped), value calculated using timer
frequency.. 5000.24 BogoMIPS (lpj=2500120)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 256
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 0/0 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
SMP alternatives: switching to UP code
ACPI: Core revision 20060707
Using local APIC timer interrupts.
Detected 12.500 MHz APIC timer.
SMP alternatives: switching to SMP code
Booting processor 1/4 APIC 0x1
Initializing CPU#1
Calibrating delay using timer specific routine.. 5000.12 BogoMIPS (lpj=2500063)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 1/1 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 1
Quad-Core AMD Opteron(tm) Processor 1381 stepping 02
SMP alternatives: switching to SMP code
Booting processor 2/4 APIC 0x2
Initializing CPU#2
Calibrating delay using timer specific routine.. 5000.18 BogoMIPS (lpj=2500094)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 2/2 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 2
Quad-Core AMD Opteron(tm) Processor 1381 stepping 02
SMP alternatives: switching to SMP code
Booting processor 3/4 APIC 0x3
Initializing CPU#3
Calibrating delay using timer specific routine.. 4999.17 BogoMIPS (lpj=2499587)
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU 3/3 -> Node 0
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 3
Quad-Core AMD Opteron(tm) Processor 1381 stepping 02
Brought up 4 CPUs
testing NMI watchdog ... OK.
time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
time.c: Detected 2500.123 MHz processor.
sizeof(vma)=176 bytes
sizeof(page)=56 bytes
sizeof(inode)=560 bytes
sizeof(dentry)=216 bytes
sizeof(ext3inode)=760 bytes
sizeof(buffer_head)=96 bytes
sizeof(skbuff)=248 bytes
migration_cost=230
checking if image is initramfs... it is
Freeing initrd memory: 2614k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
PCI: Not using MMCONFIG.
PCI: Using configuration type 1
PCI: Using configuration type 1 for extended access
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: set SATA to AHCI mode
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 9) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 11 12 14 15) *0, disabled.
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 14 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Cannot allocate resource region 1 of device 0000:00:14.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0, 0
hpet0: 4 32-bit timers, 14318180 Hz
ACPI: DMAR not present
PCI-DMA: Disabling AGP.
PCI-DMA: aperture base @ 4000000 size 65536 KB
PCI-DMA: using GART IOMMU.
PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
pnp: 00:08: iomem range 0xfec00000-0xfec00fff has been reserved
pnp: 00:08: iomem range 0xfee00000-0xfee00fff has been reserved
pnp: 00:09: iomem range 0xffb80000-0xffbfffff could not be reserved
pnp: 00:0b: ioport range 0xa00-0xa0f has been reserved
pnp: 00:0b: ioport range 0xa10-0xa1f has been reserved
pnp: 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
pnp: 00:0d: iomem range 0xc0000-0xcffff could not be reserved
pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
pnp: 00:0d: iomem range 0x100000-0xddffffff could not be reserved
PCI: Error while updating region 0000:00:14.0/1 (f0000004 != 8000a014)
PCI: Bridge: 0000:00:01.0
IO window: c000-cfff
MEM window: fe800000-fe9fffff
PREFETCH window 0x00000000fc000000-0x00000000fdffffff
PCI: Bridge: 0000:00:04.0
IO window: d000-dfff
MEM window: fea00000-feafffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:05.0
IO window: e000-efff
MEM window: feb00000-febfffff
PREFETCH window: disabled.
PCI: Bridge: 0000:00:14.4
IO window: disabled.
MEM window: disabled.
PREFETCH window: disabled.
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP reno registered
audit: initializing netlink socket (disabled)
type=2000 audit(1300575339.480:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
alg: No test for crc32c (crc32c-generic)
ksign: Installing public key data
Loading keyring
- Added public key 1DF8C62584B4E7F2
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
Boot video device is 0000:01:05.0
PCI: Setting latency timer of device 0000:00:04.0 to 64
PCI: Setting latency timer of device 0000:00:05.0 to 64
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: duty_cycle spans bit 4
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
Real Time Clock Driver v1.12ac
hpet_resources: 0xfed00000 is busy
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:06: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
brd: module loaded
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SB600_PATA: IDE controller at PCI slot 0000:00:14.1
GSI 16 sharing vector 0xC1 and IRQ 16
ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 193
SB600_PATA: chipset revision 0
SB600_PATA: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:pio, hdb:pio
Probing IDE interface ide0...
Probing IDE interface ide0...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI: (supports S0 S1 S3 S4 S5)
Initalizing network drop monitor service
Freeing unused kernel memory: 212k freed
Write protecting the kernel read-only data: 505k
GSI 17 sharing vector 0xC9 and IRQ 17
ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 201
ehci_hcd 0000:00:13.5: EHCI Host Controller
ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
ehci_hcd 0000:00:13.5: debug port 1
ehci_hcd 0000:00:13.5: irq 201, io mem 0xfe7ff000
ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 10 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 193
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 193, io mem 0xfe7fe000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
GSI 18 sharing vector 0xD1 and IRQ 18
ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 209
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 209, io mem 0xfe7fd000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
GSI 19 sharing vector 0xD9 and IRQ 19
ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 217
ohci_hcd 0000:00:13.2: OHCI Host Controller
ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
ohci_hcd 0000:00:13.2: irq 217, io mem 0xfe7fc000
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 209
ohci_hcd 0000:00:13.3: OHCI Host Controller
ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
ohci_hcd 0000:00:13.3: irq 209, io mem 0xfe7fb000
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 217
ohci_hcd 0000:00:13.4: OHCI Host Controller
ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
ohci_hcd 0000:00:13.4: irq 217, io mem 0xfe7fa000
usb usb6: configuration #1 chosen from 1 choice
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
USB Universal Host Controller Interface driver v3.0
md: raid1 personality registered for level 1
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:12.0: version 3.0
GSI 20 sharing vector 0xE1 and IRQ 20
ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 225
ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pmp pio slum part
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff900 irq 225
ata2: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ff980 irq 225
ata3: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa00 irq 225
ata4: SATA max UDMA/133 abar m1024@0xfe7ff800 port 0xfe7ffa80 irq 225
ata1: softreset failed (device not ready)
ata1: failed due to HW bug, retry pmp=0
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: Hitachi HDS721050CLA362, JP2OA39C, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: SB600 AHCI: limiting to 255 sectors per cmd
ata1.00: configured for UDMA/133
ata2: softreset failed (device not ready)
ata2: failed due to HW bug, retry pmp=0
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: Hitachi HDS721050CLA362, JP2OA39C, max UDMA/133
ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: SB600 AHCI: limiting to 255 sectors per cmd
ata2.00: configured for UDMA/133
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: Hitachi HDS72105 Rev: JP2O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
sd 0:0:0:0: Attached scsi disk sda
Vendor: ATA Model: Hitachi HDS72105 Rev: JP2O
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
sd 1:0:0:0: Attached scsi disk sdb
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@xxxxxxxxxx
device-mapper: dm-raid45: initialized v0.2594l
md: Autodetecting RAID arrays.
md: autorun ...
md: considering sdb6 ...
md: adding sdb6 ...
md: sdb5 has different UUID to sdb6
md: sdb3 has different UUID to sdb6
md: sdb1 has different UUID to sdb6
md: adding sda6 ...
md: sda5 has different UUID to sdb6
md: sda3 has different UUID to sdb6
md: sda1 has different UUID to sdb6
md: created md3
md: bind<sda6>
md: bind<sdb6>
md: running: <sdb6><sda6>
raid1: raid set md3 active with 2 out of 2 mirrors
md: considering sdb5 ...
md: adding sdb5 ...
md: sdb3 has different UUID to sdb5
md: sdb1 has different UUID to sdb5
md: adding sda5 ...
md: sda3 has different UUID to sdb5
md: sda1 has different UUID to sdb5
md: created md2
md: bind<sda5>
md: bind<sdb5>
md: running: <sdb5><sda5>
raid1: raid set md2 active with 2 out of 2 mirrors
md: considering sdb3 ...
md: adding sdb3 ...
md: sdb1 has different UUID to sdb3
md: adding sda3 ...
md: sda1 has different UUID to sdb3
md: created md1
md: bind<sda3>
md: bind<sdb3>
md: running: <sdb3><sda3>
raid1: raid set md1 active with 2 out of 2 mirrors
md: considering sdb1 ...
md: adding sdb1 ...
md: adding sda1 ...
md: created md0
md: bind<sda1>
md: bind<sdb1>
md: running: <sdb1><sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
md: ... autorun DONE.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1300575368.057:2): selinux=0 auid=4294967295 ses=4294967295
piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
EDAC MC: Ver: 2.0.1 Jan 5 2011
EDAC amd64_edac: Ver: 3.2.0 Jan 5 2011
EDAC amd64: This node reports that Memory ECC is currently disabled,
set F3x44[22] (0000:00:18.3).
EDAC amd64: WARNING: ECC is disabled by BIOS. Module will NOT be loaded.
Either Enable ECC in the BIOS, or set 'ecc_enable_override'.
Also, use of the override can cause unknown side effects.
amd64_edac: probe of 0000:00:18.2 failed with error -22
Floppy drive(s): fd0 is 1.44M
e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k3.1
e1000e: Copyright (c) 1999-2008 Intel Corporation.
ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 193
PCI: Setting latency timer of device 0000:02:00.0 to 64
input: PC Speaker as /class/input/input0
e1000e 0000:02:00.0: Warning: detected ASPM enabled in EEPROM
eth0: (PCI Express:2.5GB/s:Width x1) 40:61:86:ee:20:46
eth0: Intel(R) PRO/1000 Network Connection
eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 209
PCI: Setting latency timer of device 0000:03:00.0 to 64
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
e1000e 0000:03:00.0: Warning: detected ASPM enabled in EEPROM
eth1: (PCI Express:2.5GB/s:Width x1) 40:61:86:ee:20:47
eth1: Intel(R) PRO/1000 Network Connection
eth1: MAC: 2, PHY: 2, PBA No: ffffff-0ff
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
floppy0: no floppy controllers found
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
lp: driver loaded but no devices found
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Mapper loaded
dell-wmi: No known WMI GUID found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: multipath: version 1.0.5 loaded
loop: loaded (max 8 devices)
EXT3 FS on md1, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on md3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS on md2, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Adding 3999736k swap on /dev/sda2. Priority:-1 extents:1 across:3999736k
Adding 3999736k swap on /dev/sdb2. Priority:-2 extents:1 across:3999736k
powernow-k8: Found 1 Quad-Core AMD Opteron(tm) Processor 1381
processors (4 cpu cores) (version 2.20.00)
powernow-k8: 0 : fid 0x0 gid 0x0 (2500 MHz)
powernow-k8: 1 : fid 0x0 gid 0x0 (1800 MHz)
powernow-k8: 2 : fid 0x0 gid 0x0 (1300 MHz)
powernow-k8: 3 : fid 0x0 gid 0x0 (800 MHz)
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ADDRCONF(NETDEV_UP): eth0: link is not ready
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
eth0: 10/100 speed: disabling TSO
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ADDRCONF(NETDEV_UP): eth1: link is not ready
md: syncing RAID array md0
md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
md: using maximum available idle IO bandwidth (but not more than
200000 KB/sec) for reconstruction.
md: using 128k window, over a total of 1023936 blocks.
md: delaying resync of md2 until md0 has finished resync (they share
one or more physical units)
md: delaying resync of md1 until md0 has finished resync (they share
one or more physical units)
md: delaying resync of md2 until md0 has finished resync (they share
one or more physical units)
md: md0: sync done.
md: syncing RAID array md2
md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
md: using maximum available idle IO bandwidth (but not more than
200000 KB/sec) for reconstruction.
md: using 128k window, over a total of 277728192 blocks.
md: delaying resync of md1 until md2 has finished resync (they share
one or more physical units)
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:sda1
disk 1, wo:0, o:1, dev:sdb1
INFO: task md1_resync:9770 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
md1_resync D ffff81011edba820 0 9770 55 9768 (L-TLB)
ffff810083259d70 0000000000000046 0000000000000000 ffff81011ea66e0c
ffff81011ea66c0c 000000000000000a ffff81011ccc27a0 ffff81011edba820
000011d56f2a0b28 000000000000100f ffff81011ccc2988 000000028008b4d7
Call Trace:
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021af66>] md_do_sync+0x1d8/0x833
[<ffffffff8008ca47>] enqueue_task+0x41/0x56
[<ffffffff8008cab2>] __activate_task+0x56/0x6d
[<ffffffff8008c897>] dequeue_task+0x18/0x37
[<ffffffff80062ff8>] thread_return+0x62/0xfe
[<ffffffff800a0b5f>] autoremove_wake_function+0x0/0x2e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b93a>] md_thread+0xf8/0x10e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b842>] md_thread+0x0/0x10e
[<ffffffff8003296e>] kthread+0xfe/0x132
[<ffffffff8005dfb1>] child_rip+0xa/0x11
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff80032870>] kthread+0x0/0x132
[<ffffffff8005dfa7>] child_rip+0x0/0x11
INFO: task md1_resync:9770 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
md1_resync D ffff81011edba820 0 9770 55 9768 (L-TLB)
ffff810083259d70 0000000000000046 0000000000000000 ffff81011ea66e0c
ffff81011ea66c0c 000000000000000a ffff81011ccc27a0 ffff81011edba820
000011d56f2a0b28 000000000000100f ffff81011ccc2988 000000028008b4d7
Call Trace:
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021af66>] md_do_sync+0x1d8/0x833
[<ffffffff8008ca47>] enqueue_task+0x41/0x56
[<ffffffff8008cab2>] __activate_task+0x56/0x6d
[<ffffffff8008c897>] dequeue_task+0x18/0x37
[<ffffffff80062ff8>] thread_return+0x62/0xfe
[<ffffffff800a0b5f>] autoremove_wake_function+0x0/0x2e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b93a>] md_thread+0xf8/0x10e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b842>] md_thread+0x0/0x10e
[<ffffffff8003296e>] kthread+0xfe/0x132
[<ffffffff8005dfb1>] child_rip+0xa/0x11
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff80032870>] kthread+0x0/0x132
[<ffffffff8005dfa7>] child_rip+0x0/0x11
INFO: task md1_resync:9770 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
md1_resync D ffff81011edba820 0 9770 55 9768 (L-TLB)
ffff810083259d70 0000000000000046 0000000000000000 ffff81011ea66e0c
ffff81011ea66c0c 000000000000000a ffff81011ccc27a0 ffff81011edba820
000011d56f2a0b28 000000000000100f ffff81011ccc2988 000000028008b4d7
Call Trace:
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021af66>] md_do_sync+0x1d8/0x833
[<ffffffff8008ca47>] enqueue_task+0x41/0x56
[<ffffffff8008cab2>] __activate_task+0x56/0x6d
[<ffffffff8008c897>] dequeue_task+0x18/0x37
[<ffffffff80062ff8>] thread_return+0x62/0xfe
[<ffffffff800a0b5f>] autoremove_wake_function+0x0/0x2e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b93a>] md_thread+0xf8/0x10e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b842>] md_thread+0x0/0x10e
[<ffffffff8003296e>] kthread+0xfe/0x132
[<ffffffff8005dfb1>] child_rip+0xa/0x11
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff80032870>] kthread+0x0/0x132
[<ffffffff8005dfa7>] child_rip+0x0/0x11
INFO: task md1_resync:9770 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
md1_resync D ffff81011edba820 0 9770 55 9768 (L-TLB)
ffff810083259d70 0000000000000046 0000000000000000 ffff81011ea66e0c
ffff81011ea66c0c 000000000000000a ffff81011ccc27a0 ffff81011edba820
000011d56f2a0b28 000000000000100f ffff81011ccc2988 000000028008b4d7
Call Trace:
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021af66>] md_do_sync+0x1d8/0x833
[<ffffffff8008ca47>] enqueue_task+0x41/0x56
[<ffffffff8008cab2>] __activate_task+0x56/0x6d
[<ffffffff8008c897>] dequeue_task+0x18/0x37
[<ffffffff80062ff8>] thread_return+0x62/0xfe
[<ffffffff800a0b5f>] autoremove_wake_function+0x0/0x2e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b93a>] md_thread+0xf8/0x10e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b842>] md_thread+0x0/0x10e
[<ffffffff8003296e>] kthread+0xfe/0x132
[<ffffffff8005dfb1>] child_rip+0xa/0x11
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff80032870>] kthread+0x0/0x132
[<ffffffff8005dfa7>] child_rip+0x0/0x11
INFO: task md1_resync:9770 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
md1_resync D ffff81011edba820 0 9770 55 9768 (L-TLB)
ffff810083259d70 0000000000000046 0000000000000000 ffff81011ea66e0c
ffff81011ea66c0c 000000000000000a ffff81011ccc27a0 ffff81011edba820
000011d56f2a0b28 000000000000100f ffff81011ccc2988 000000028008b4d7
Call Trace:
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021af66>] md_do_sync+0x1d8/0x833
[<ffffffff8008ca47>] enqueue_task+0x41/0x56
[<ffffffff8008cab2>] __activate_task+0x56/0x6d
[<ffffffff8008c897>] dequeue_task+0x18/0x37
[<ffffffff80062ff8>] thread_return+0x62/0xfe
[<ffffffff800a0b5f>] autoremove_wake_function+0x0/0x2e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b93a>] md_thread+0xf8/0x10e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b842>] md_thread+0x0/0x10e
[<ffffffff8003296e>] kthread+0xfe/0x132
[<ffffffff8005dfb1>] child_rip+0xa/0x11
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff80032870>] kthread+0x0/0x132
[<ffffffff8005dfa7>] child_rip+0x0/0x11
INFO: task md1_resync:9770 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
md1_resync D ffff81011edba820 0 9770 55 9768 (L-TLB)
ffff810083259d70 0000000000000046 0000000000000000 ffff81011ea66e0c
ffff81011ea66c0c 000000000000000a ffff81011ccc27a0 ffff81011edba820
000011d56f2a0b28 000000000000100f ffff81011ccc2988 000000028008b4d7
Call Trace:
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021af66>] md_do_sync+0x1d8/0x833
[<ffffffff8008ca47>] enqueue_task+0x41/0x56
[<ffffffff8008cab2>] __activate_task+0x56/0x6d
[<ffffffff8008c897>] dequeue_task+0x18/0x37
[<ffffffff80062ff8>] thread_return+0x62/0xfe
[<ffffffff800a0b5f>] autoremove_wake_function+0x0/0x2e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b93a>] md_thread+0xf8/0x10e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b842>] md_thread+0x0/0x10e
[<ffffffff8003296e>] kthread+0xfe/0x132
[<ffffffff8005dfb1>] child_rip+0xa/0x11
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff80032870>] kthread+0x0/0x132
[<ffffffff8005dfa7>] child_rip+0x0/0x11
INFO: task md1_resync:9770 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
md1_resync D ffff81011edba820 0 9770 55 9768 (L-TLB)
ffff810083259d70 0000000000000046 0000000000000000 ffff81011ea66e0c
ffff81011ea66c0c 000000000000000a ffff81011ccc27a0 ffff81011edba820
000011d56f2a0b28 000000000000100f ffff81011ccc2988 000000028008b4d7
Call Trace:
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021af66>] md_do_sync+0x1d8/0x833
[<ffffffff8008ca47>] enqueue_task+0x41/0x56
[<ffffffff8008cab2>] __activate_task+0x56/0x6d
[<ffffffff8008c897>] dequeue_task+0x18/0x37
[<ffffffff80062ff8>] thread_return+0x62/0xfe
[<ffffffff800a0b5f>] autoremove_wake_function+0x0/0x2e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b93a>] md_thread+0xf8/0x10e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b842>] md_thread+0x0/0x10e
[<ffffffff8003296e>] kthread+0xfe/0x132
[<ffffffff8005dfb1>] child_rip+0xa/0x11
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff80032870>] kthread+0x0/0x132
[<ffffffff8005dfa7>] child_rip+0x0/0x11
INFO: task md1_resync:9770 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
md1_resync D ffff81011edba820 0 9770 55 9768 (L-TLB)
ffff810083259d70 0000000000000046 0000000000000000 ffff81011ea66e0c
ffff81011ea66c0c 000000000000000a ffff81011ccc27a0 ffff81011edba820
000011d56f2a0b28 000000000000100f ffff81011ccc2988 000000028008b4d7
Call Trace:
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021af66>] md_do_sync+0x1d8/0x833
[<ffffffff8008ca47>] enqueue_task+0x41/0x56
[<ffffffff8008cab2>] __activate_task+0x56/0x6d
[<ffffffff8008c897>] dequeue_task+0x18/0x37
[<ffffffff80062ff8>] thread_return+0x62/0xfe
[<ffffffff800a0b5f>] autoremove_wake_function+0x0/0x2e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b93a>] md_thread+0xf8/0x10e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b842>] md_thread+0x0/0x10e
[<ffffffff8003296e>] kthread+0xfe/0x132
[<ffffffff8005dfb1>] child_rip+0xa/0x11
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff80032870>] kthread+0x0/0x132
[<ffffffff8005dfa7>] child_rip+0x0/0x11
INFO: task md1_resync:9770 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
md1_resync D ffff81011edba820 0 9770 55 9768 (L-TLB)
ffff810083259d70 0000000000000046 0000000000000000 ffff81011ea66e0c
ffff81011ea66c0c 000000000000000a ffff81011ccc27a0 ffff81011edba820
000011d56f2a0b28 000000000000100f ffff81011ccc2988 000000028008b4d7
Call Trace:
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021af66>] md_do_sync+0x1d8/0x833
[<ffffffff8008ca47>] enqueue_task+0x41/0x56
[<ffffffff8008cab2>] __activate_task+0x56/0x6d
[<ffffffff8008c897>] dequeue_task+0x18/0x37
[<ffffffff80062ff8>] thread_return+0x62/0xfe
[<ffffffff800a0b5f>] autoremove_wake_function+0x0/0x2e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b93a>] md_thread+0xf8/0x10e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b842>] md_thread+0x0/0x10e
[<ffffffff8003296e>] kthread+0xfe/0x132
[<ffffffff8005dfb1>] child_rip+0xa/0x11
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff80032870>] kthread+0x0/0x132
[<ffffffff8005dfa7>] child_rip+0x0/0x11
INFO: task md1_resync:9770 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
md1_resync D ffff81011edba820 0 9770 55 9768 (L-TLB)
ffff810083259d70 0000000000000046 0000000000000000 ffff81011ea66e0c
ffff81011ea66c0c 000000000000000a ffff81011ccc27a0 ffff81011edba820
000011d56f2a0b28 000000000000100f ffff81011ccc2988 000000028008b4d7
Call Trace:
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021af66>] md_do_sync+0x1d8/0x833
[<ffffffff8008ca47>] enqueue_task+0x41/0x56
[<ffffffff8008cab2>] __activate_task+0x56/0x6d
[<ffffffff8008c897>] dequeue_task+0x18/0x37
[<ffffffff80062ff8>] thread_return+0x62/0xfe
[<ffffffff800a0b5f>] autoremove_wake_function+0x0/0x2e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b93a>] md_thread+0xf8/0x10e
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff8021b842>] md_thread+0x0/0x10e
[<ffffffff8003296e>] kthread+0xfe/0x132
[<ffffffff8005dfb1>] child_rip+0xa/0x11
[<ffffffff800a0947>] keventd_create_kthread+0x0/0xc4
[<ffffffff80032870>] kthread+0x0/0x132
[<ffffffff8005dfa7>] child_rip+0x0/0x11
md: md2: sync done.
md: syncing RAID array md1
md: minimum _guaranteed_ reconstruction speed: 1000 KB/sec/disc.
md: using maximum available idle IO bandwidth (but not more than
200000 KB/sec) for reconstruction.
md: using 128k window, over a total of 20479936 blocks.
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:sda5
disk 1, wo:0, o:1, dev:sdb5
md: md1: sync done.
RAID1 conf printout:
--- wd:2 rd:2
disk 0, wo:0, o:1, dev:sda3
disk 1, wo:0, o:1, dev:sdb3
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
