Re: CentOS 5.5 does not recognise SAS drives with LSI 1068E Controller

[Kai Schaetzl <maillists@xxxxxxxxxxxxx>]

Peter Peltonen wrote on Wed, 9 Mar 2011 17:55:04 +0200:

> http://www.supermicro.com/products/motherboard/xeon1333/5000V/X7DVL-3.cfm
> 
> Based on that info I assume the board having a "8x SAS Ports via LSI
> 1068E Controller".

Well, did you check at the LSI site for the controller/card that *is* 
detected (MegaRAID 3028)?
Maybe it's not a 1068E. There is no mention of it anywhere just on that 
product page. Maybe that info is wrong. Also, you should be aware that the 
1068E sits usually on a PCI-Express card. If that is not present or if you 
use the SATA ports on the MB that is *not* the 1068E!

Kai


_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos