Hmm, I am not sure if I understand you correctly: are you saying that in the firmware configuration there might be an option that makes the disks invisible for the OS? Most controllers have a firmware you can enter at boot with a keystroke. Once in, you create/prepare arrays or single drives, which the OS can then see... _______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
Re: CentOS 5.5 does not recognise SAS drives with LSI 1068E Controller
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- To: "'CentOS mailing list'" <centos@xxxxxxxxxx>
- Subject: Re: CentOS 5.5 does not recognise SAS drives with LSI 1068E Controller
- From: "compdoc" <compdoc@xxxxxxxxxxxx>
- Date: Wed, 9 Mar 2011 10:11:42 -0700
- Delivered-to: centos@xxxxxxxxxx
- In-reply-to: <AANLkTin-OS-4TQVS4dvExVpyWdSGcVLr0xPTu5dUcbSw@xxxxxxxxxxxxxx>
- Thread-index: AQL3HdNlrNEJhtKZymAYrx2SLkjO7QDRwpzUAoFftdSRtCT9wA==
- Follow-Ups:
- References:
- CentOS 5.5 does not recognise SAS drives with LSI 1068E Controller
- From: Peter Peltonen
- Re: CentOS 5.5 does not recognise SAS drives with LSI 1068E Controller
- From: m . roth
- Re: CentOS 5.5 does not recognise SAS drives with LSI 1068E Controller
- From: Peter Peltonen
- CentOS 5.5 does not recognise SAS drives with LSI 1068E Controller
- Prev by Date: Re: Server hangs on CentOS 5.5
- Next by Date: Re: CentOS 5.5 does not recognise SAS drives with LSI 1068E Controller
- Previous by thread: Re: CentOS 5.5 does not recognise SAS drives with LSI 1068E Controller
- Next by thread: Re: CentOS 5.5 does not recognise SAS drives with LSI 1068E Controller
- Index(es):
 |