On Friday 26 November 2010 12:28, Robert Heller wrote:
> > works before committing it to the config:
> > > brctl addbr br0
> > > ifconfig eth0 down
> > > ifconfig br0 192.168.1.100 up
> > > ifconfig eth0 0.0.0.0 up
>
> brctl addif br0 eth0
>
> You need to add the physical interface(s) to the bridge interface.
Yes, thank you for this information. This is the set I had missed.
> You can set this up to go automagically like this:
>
> sauron.deepsoft.com% cat /etc/sysconfig/network-scripts/ifcfg-eth0
> # nVidia Corporation MCP77 Ethernet
> DEVICE=eth0
> BOOTPROTO=static
> HWADDR=00:19:66:D6:ED:93
> ONBOOT=yes
> BRIDGE=br0
>
> sauron.deepsoft.com% cat /etc/sysconfig/network-scripts/ifcfg-br0
> DEVICE=br0
> TYPE=Bridge
> BOOTPROTO=static
> BROADCAST=192.168.250.255
> IPADDR=192.168.250.1
> NETMASK=255.255.255.0
> NETWORK=192.168.250.0
> ONBOOT=yes
Thnx again for this information.
--
Regards
Robert
Linux
The adventure of a life time.
Linux User #296285
Get Counted
http://counter.li.org/
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
