Re: How to stop automount

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Keith Roberts wrote:
> On Tue, 16 Nov 2010, Dick Roth wrote:
>
>> To: CentOS List<centos@xxxxxxxxxx>
>> From: Dick Roth<raroth7@xxxxxxxxxxx>
>> Subject:  How to stop automount
>>
>> I just put a USB hard drive into service, but find that unless the drive
>> is connected to my PC the machine won't boot and drops to a shell.
>> Below is the line I added to fstab.  I thought that the option "noauto"
>> would prevent the machine from trying to mount the drive
>>
>> /dev/sdb             /usbdrive           ext3    user,noauto,rw  0 2
>>
>> What am I doing wrong?  Any advice is welcome.
>>
>> Dick
>
> We seem to be talking about 2 different uses for the USB
> drive.
>
> Do you want to boot a Linux system from the USB stick, or do
> you want to mount the USB drive after the system is up?
>
> Kind Regards,
>
> Keith
>
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxx
> http://lists.centos.org/mailman/listinfo/centos
>

Folks, thank you very much for the advice.  I am using the disk for 
system backup and then putting it in a safe.  It does not have to boot 
the system.  I did find that changing the last element of the line in 
fstab from 2 to 0 cured my immediate problem:  the machine now boots 
properly without the drive physically attached.

Again, thanks to all.  What a great community!

ttfn,
Dick


-- 
Yes indeed...the Hokey Pokey *is* what its all about!
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux