On Sat, Nov 6, 2010 at 19:10, John R Pierce <pierce@xxxxxxxxxxxx> wrote:
> that temporary route will break his internet access, since 192.168.0.1
> is ALSO his internet gateway on the W-LAN side.
>
> there's no way around this. if you can readdress one or the other LAN,
> then this would just work all the time.
>
This is on the Internet-connected interface:
wlan0 Link encap:Ethernet HWaddr 00:18:de:98:c7:34
inet addr:192.168.0.26 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::218:deff:fe98:c734/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:114879 errors:0 dropped:0 overruns:0 frame:0
TX packets:78945 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:104017653 (104.0 MB) TX bytes:11292782 (11.2 MB)
And this is on the LAN-connected interface:
eth0 Link encap:Ethernet HWaddr 00:15:c5:c8:13:d1
inet addr:192.168.0.101 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::215:c5ff:fec8:13d1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1921474 errors:0 dropped:0 overruns:0 frame:0
TX packets:8322288 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:146445850 (146.4 MB) TX bytes:3479224403 (3.4 GB)
Interrupt:17
I'm not booted into CentOS at the moment (I just rebooted to Ubuntu
because my Thunderbird mail is there) but I can reboot if there is any
other info that might be relevant. I'm really surprised that it is
this difficult (I don't yet believe impossible!) and just assumed that
I'm doing things wrong. As the saying goes, if in Linux it is getting
difficult, then you are probably doing it wrong! Surely I am not the
first person who is connected to two separate LANs and needs to access
addresses on both of them.
--
Dotan Cohen
http://gibberish.co.il
http://what-is-what.com
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
