Transferring system to new RAID drive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



> Is there a document with instructions for this?
> I've had smartd warnings that a hard disk in my server is sick,
> so I am installing a new drive (in addition to the old).

Not to hijack a thread but on a similiar note.  I have a Centos 4.x
server with a 500G sata drive working fine except for disk I/O issues
at peak times.  I have copied it to a new drive before using 'dd
if=/dev/sda of=/dev/sdb bs=16384' in middle of night offline.  I did
that in past because 'smartctl -a /dev/sda' did not work on the old
drive.  Is there a way to copy it to a hardware RAID 1 array of two
drives in a similiar way?  If so what not too expensive 2 port
hardware raid controller do you reccommend and how do you do it?
Thanks.

Matt
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos


[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux