Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util
sda 0.15 2.47 0.41 0.82 13.01 26.36 31.97 0.01 6.98 1.01 0.12
sda1 0.02 0.00 0.00 0.00 0.04 0.00 24.50 0.00 5.38 4.82 0.00
sda2 0.01 0.00 0.00 0.00 0.03 0.00 37.79 0.00 6.77 5.85 0.00
sda3 0.12 2.47 0.40 0.82 12.93 26.36 31.98 0.01 6.96 1.01 0.12
sdb 1.48 0.00 315.21 0.01 40533.39 0.75 128.59 26.94 85.45 2.80 88.24
sdb1 1.47 0.00 315.21 0.01 40533.30 0.75 128.59 26.94 85.45 2.80 88.24
sdc 1.04 0.00 315.65 0.01 40533.48 1.09 128.41 1.92 6.07 0.88 27.69
sdc1 1.02 0.00 315.65 0.01 40533.39 1.09 128.41 1.92 6.07 0.88 27.68
md0 0.00 0.00 0.00 0.00 0.00 0.00 8.00 0.00 0.00 0.00 0.00
Device: rrqm/s wrqm/s r/s w/s rsec/s wsec/s avgrq-sz avgqu-sz await svctm %util
sda 0.00 16.80 0.00 1.00 0.00 142.40 142.40 0.00 1.00 0.60 0.06
sda1 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
sda2 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
sda3 0.00 16.80 0.00 1.00 0.00 142.40 142.40 0.00 1.00 0.60 0.06
sdb 56.40 0.00 189.60 0.00 30822.40 0.00 162.57 17.45 93.23 5.28 100.02
sdb1 56.40 0.00 189.60 0.00 30822.40 0.00 162.57 17.45 93.23 5.28 100.02
sdc 0.00 0.00 239.40 0.00 30643.20 0.00 128.00 0.69 2.89 0.68 16.24
sdc1 0.00 0.00 239.40 0.00 30643.20 0.00 128.00 0.69 2.89 0.68 16.24
md0 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00 0.00
The samsung is on sdb and almost always 100% and svctm is higher than 2.....
On Mon, Sep 27, 2010 at 7:05 PM, Tom Bishop <bishoptf@xxxxxxxxx> wrote:
Thanks ROss, I poured through my dmesg logs and all looks well, things appear fine but i don't think the samsung should be running at 100%...something is not right but it hasn't bit me yet....her are my dmesg logs...
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd00 irq 225
ata2: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffd80 irq 225
ata3: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe00 irq 225
ata4: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6ffe80 irq 225
ata5: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff00 irq 225
ata6: SATA max UDMA/133 abar m1024@0xfe6ffc00 port 0xfe6fff80 irq 225
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATA-8: WDC WD3200AAJS-00L7A0, 01.03E01, max UDMA/133
ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata3.00: ATA-8: ST31000528AS, CC3E, max UDMA/133
ata3.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
Vendor: ATA Model: WDC WD3200AAJS-0 Rev: 01.0
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda3
sd 0:0:0:0: Attached scsi disk sda
Vendor: ATA Model: SAMSUNG HD103SJ Rev: 1AJ1
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 1953525168 512-byte hdwr sectors (1000205 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 3a 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1
sd 1:0:0:0: Attached scsi disk sdb
Vendor: ATA Model: ST31000528AS Rev: CC3E
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sdc: 1953525168 512-byte hdwr sectors (1000205 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
SCSI device sdc: 1953525168 512-byte hdwr sectors (1000205 MB)
sdc: Write Protect is off
sdc: Mode Sense: 00 3a 00 00
SCSI device sdc: drive cache: write back
sdc: sdc1
sd 2:0:0:0: Attached scsi disk sdc
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.11.5-ioctl (2007-12-12) initialised: dm-devel@xxxxxxxxxx
device-mapper: dm-raid45: initialized v0.2594l
Also, smartctl output...
smartctl -A /dev/sdb
smartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 100 100 051 Pre-fail Always - 0
2 Throughput_Performance 0x0026 252 252 000 Old_age Always - 0
3 Spin_Up_Time 0x0023 071 071 025 Pre-fail Always - 9011
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 5
5 Reallocated_Sector_Ct 0x0033 252 252 010 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 252 252 051 Old_age Always - 0
8 Seek_Time_Performance 0x0024 252 252 015 Old_age Offline - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 64
10 Spin_Retry_Count 0x0032 252 252 051 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 252 252 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 5
191 G-Sense_Error_Rate 0x0022 252 252 000 Old_age Always - 0
192 Power-Off_Retract_Count 0x0022 252 252 000 Old_age Always - 0
194 Temperature_Celsius 0x0002 057 053 000 Old_age Always - 43 (Lifetime Min/Max 20/47)
195 Hardware_ECC_Recovered 0x003a 100 100 000 Old_age Always - 0
196 Reallocated_Event_Count 0x0032 252 252 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 252 252 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 252 252 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0036 200 200 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x002a 100 100 000 Old_age Always - 0
223 Load_Retry_Count 0x0032 252 252 000 Old_age Always - 0
225 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 5On Mon, Sep 27, 2010 at 5:54 PM, Ross Walker <rswwalker@xxxxxxxxx> wrote:
On Sep 27, 2010, at 1:24 PM, Les Mikesell <lesmikesell@xxxxxxxxx> wrote:Also, also, if any of the drives are operating in PIO mode (Legacy Mode) then rebuild times will be horrific, as well as performance afterward. Make sure all drives are in SATA/AHCI mode.
> On 9/27/2010 12:19 PM, Benjamin Franz wrote:
>> On 09/27/2010 08:15 AM, Tom Bishop wrote:
>>> So I'm in the process of building and testing a raid setup and it
>>> appeared to take along time to build I came across some settings for
>>> setting the min amount of time and that helped but it appears that one
>>> of the disks is struggling (100 utilization) vs the other one...I was
>>> wondering if anyone else has seen this and if so, is their a solution
>>> for it...my 2 disks are 1 Samsung F3 1tb /dev/sdb and 1 Seagate
>>> 7200.12 1Tb /dev/sdc...smartctl looks good on both....
>>>
>>>
>>
>> [...]
>>
>> What is the output from 'cat /proc/mdstat'?
>
> Also, head position/motion is the usual limiting factor with disk
> performance. Do you have other disk activity that will keep yanking the
> head on the active drive away from the track currently needed for the
> rebuild?
-Ross
PS look at svc_tm in iostat and make sure all drives are performing correctly. Maybe a bad cable or flakey port expander...
_______________________________________________
CentOS mailing list
CentOS@xxxxxxxxxx
http://lists.centos.org/mailman/listinfo/centos
_______________________________________________ CentOS mailing list CentOS@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos
