Bill,
On Mon, 2005-01-10 at 15:15, Bill Wichser wrote:
> In answer to my own question, the problem can be traced back to a
> software issue with the HP switch. By turning off LACP on all the
> ports, the timings work so that the installation continues.
>
Chalk one up for HP then. Switches from SMC and Nortel Networks, no
matter what you turn off or on (fast forwarding, edge ports, spanning
trees, etc.) are still afflicted by this dual-DHCP-request problem.
I've seen it since the RH9 days. It always took an anaconda hack to fix
and rebuild the first stage loader. RH has supposedly taken care of it
in 3.4, which I'm just now testing. We'll see if it works.
> Bill
>
> Bill Wichser wrote:
> > There appears to be an issue with installation over an HP switch. Upon
> > bootup, the network driver resets twice which somehow never allows the
> > client to ask and therefore receive it's MAC address.
> >
> > This follows the RH bug :
> > https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=110036
> >
> > Installation via a directly attached cable to the head node works fine.
> >
> >
> > I have emailed the Beowulf list in hopes that the problem was in some
> > configuration of the switch but have recently come across this bug
> > report and it appears that the symptoms are the same.
> >
> > Are there any plans to roll these patches into CentOS 3.3 (x86_64) in
> > the near future?
> >
> > Thanks,
> > Bill
> >
> > _______________________________________________
> > CentOS mailing list
> > CentOS@xxxxxxxxxxx
> > http://lists.caosity.org/mailman/listinfo/centos
>
>
> _______________________________________________
> CentOS mailing list
> CentOS@xxxxxxxxxxx
> http://lists.caosity.org/mailman/listinfo/centos
Will Dinkel
Chief Technology Officer
Team HPC, Inc.
785-542-2135 x304
wdinkel@xxxxxxxxxxx
http://www.teamhpc.com
