Jerry Geis <geisj at pagestation.com <http://lists.centos.org/mailman/listinfo/centos>> wrote: >/ Without being able to copy anything off the PC I did an />/ lspci />/ USB Controller Intel 82801 (ICH6 Family) Rev 3 / The ICH6 should be supported, unless Intel really changed something. What is the exact model of your USB storage device? What does "lsusb" give you, if anything? What about what comes up in /var/log/messages when you stick the device in? [ tail -f /var/log/messages, then stick in the device ] ------------------ sticking the device in gives nothing further in /var/log/messages. lsmod | grep hcd shows the 3rd column as "0" as not in use... lsusb gives no output. I am just using a lexar usb device jumpdrive. There is no other writing on it other than 128M. (Has worked in everything else I've stuck it in). Interesting thing is lookin at dmesg says lines like: ehci_hcd requesing interrupt 23 failed ACPI -> GSI IRQ 23 uhci_hcd requesting interrupt 19 failed ACPI -> GSI 19 IRQ 19 Jerry -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.centos.org/pipermail/centos/attachments/20051219/386dee8b/attachment.htm