MD Raid 1 software device not booting not even reaching grub

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]



Hi, I have a raid 1 setup where /boot and the rest lies inside the md0
container.
/dev/sda1 md0 has /boot
/dev/sda2 md0 has swap
/dev/sda3 md0 has /

SCSI card is an ADAPTEC AIC79xx
Grub as the bootloader
Centos 4.1 as the OS version
Two 70gb SCSI disks

The server was working fine. Then a power outage. checked the
board,disk,ram,etc. All fine.
Now when I try to boot the server does not even reach GRUB (no splash, no menu).

I read a post about maybe the MBR got damaged (no fix posted) and
another post about missing SCSI drivers not being loaded before kernel
boot.

Suggestions?


--

-------------------------------------------
Erick Perez
Linux User 376588
http://counter.li.org/  (Get counted!!!)
Panama, Republic of Panama

[Index of Archives]     [CentOS]     [CentOS Announce]     [CentOS Development]     [CentOS ARM Devel]     [CentOS Docs]     [CentOS Virtualization]     [Carrier Grade Linux]     [Linux Media]     [Asterisk]     [DCCP]     [Netdev]     [Xorg]     [Linux USB]
  Powered by Linux