I put a new server together with CentOS 4. This server is doing a number
of functions including ntp, mail, and web server. I had a USB drive
plugged in and it was working great. I could access it at /media/usbdisk
and I copied lots of data to it.
I felt the server was "complete" so I wanted to move it. I shut it down,
moved it, etc. Everything is ok, except that I cannot access the usbdisk
now. If I plug it into my laptop (FC4) I can access it without any
problems.
When I plug it into the server I get:
Aug 30 15:47:22 porky kernel: ohci_hcd 0000:00:0f.2: wakeup
Aug 30 15:47:22 porky kernel: usb 1-2: new full speed USB device using
address 3
Aug 30 15:47:22 porky kernel: scsi3 : SCSI emulation for USB Mass
Storage devices
Aug 30 15:47:22 porky kernel: Vendor: WDC WD16 Model: 00JB-00GVA0
Rev: 0 0
Aug 30 15:47:22 porky kernel: Type: Direct-Access
ANSI SCSI revision: 02
Aug 30 15:47:22 porky kernel: SCSI device sdb: 312581808 512-byte hdwr
sectors (160042 MB)
Aug 30 15:47:22 porky kernel: sdb: assuming drive cache: write through
Aug 30 15:47:22 porky kernel: sdb: sdb1
Aug 30 15:47:22 porky kernel: Attached scsi disk sdb at scsi3, channel
0, id 0, lun 0
Aug 30 15:47:22 porky kernel: Attached scsi generic sg3 at scsi3,
channel 0, id 0, lun 0, type 0
Aug 30 15:47:22 porky scsi.agent[9209]: disk
at /devices/pci0000:00/0000:00:0f.2/usb1/1-2/1-2:1.0/host3/target3:0:0/3:0:0:0
Aug 30 15:47:23 porky fstab-sync[9282]: added mount point /media/usbdisk
for /dev/sdb1
Problem is when I go to /media/usbdisk there's nothing there. Anyone
have any suggestions?
Thanks,
James
