Manual Paritioning with fdisk

[gwaugh at frontstreetnetworks.com (Gerald Waugh)]

On Tue, 2005-04-12 at 06:19 +0200, dan1 wrote:
> Hello, Gerald.
> 
> This is my personnal step by step documentation about how to install 
> software RAID with CentOS 3 or 4.
Dan,

Thanks for the info... Disk Druid was always a pain to me.
I did get all the partitions into RAID1, except for /boot
seems like when /boot is a raid array, the installer never ask where you
want to put the mbr. Thus when you reboot, it can't boot up.

I also never seen that 'clone drive option' 
I'll try again tomorrow.
Thanks again for a good write up.

Gerald