On Fri, Nov 27, 2015 at 11:18 PM, Craig Thompson <president@xxxxxxxxxxxxxxxxxx> wrote:
First post to this list. I would appreciate some help on this issue.As background, I installed CentOS 7 on a Dell server, and then ran the following commands:yum update http://buildlogs.centos.org/centos/7/virt/x86_64/xen/centos-release-xen-7-11.el7.x86_64.rpmyum --enablerepo=centos-virt-xen-testing updateyum --enablerepo=centos-virt-xen-testing install xenDoing that, I was able to successfully install Xen, create a virtual machine with its own HVM setup, logical volume, etc. and boot it just fine.I then tried to do the same on an IBM x3550 server I’m trying to install with CentOS 7. The CentOS 7 install went just fine. I can boot into the standard kernel and have a working machine. But after running the commands above to install the Xen hypervisor, the machine hangs on boot for a few moments after displaying the lines below and then reboots in a loop over and over and over:Loading Xen 4.6.0-2.el7 …Loading Linux 3.18.21-16.el7.x86_64 …Loading initial ramdisk …It never gets beyond that. If I choose the stock kernel (no Xen) from the Grub menu, it will continue to boot into that just fine.My grub.cfg file has these entries of note:multiboot /xen-4.6.0-2.el7.gz placeholder dom0_mem=1024M,max:1024M cpuinfo com1=115200,8n1 console=com1,tty loglvl=all guest_loglvl=all ${xen_rm_opts}echo 'Loading Linux 3.18.21-16.el7.x86_64 ...'module /vmlinuz-3.18.21-16.el7.x86_64 placeholder root=UUID=9dc18146-f9b3-41cc-ba9c-7314689abcde ro crashkernel=auto debug irqpoll ipv6.disable=1 console=hvc0 earlyprintk=xen nomodesetecho 'Loading initial ramdisk ...'module --nounzip /initramfs-3.18.21-16.el7.x86_64.imgWhat I have tried:1) adding debug into the vmlinuz line2) disabling ipv6 in that line3) adding root=UUID=9dc18146-f9b3-41cc-ba9c-7314689abcde to the last line AFTER /initramfs ….Nothing so far has made any difference. Obviously the process works, as it works for me just fine on the Dell server.Underlying this machine is a SATA RAID 1 PCI card with two SSD drives attached in a RAID 1 mirror. Not that that should matter, but I’m including it for reference. As noted previously, it boots into the stock kernel just fine.Any help would be appreciated.
Thanks for the testing and the report.
Have you tried booting the Xen4CentOS kernel (Linux-3.18.21-16) by itself (i.e., not under Xen)?
Also, is there any chance you could get the output of a serial console? That's pretty critical for debugging this sort of thing.
-George
_______________________________________________ CentOS-virt mailing list CentOS-virt@xxxxxxxxxx https://lists.centos.org/mailman/listinfo/centos-virt
