Thanks, This is what I'm getting, ERROR Unknown argument 'bridge:br0' -This is the command, virt-install -n $machinename -r $memory --vcpus=$cpus --os-variant=rhel6 --accelerate -v -w --network bridge:br0 --network bridge:br1 --disk path=/home/vm/$machinename.img,size=100 -l http://172.21.110.213/6.3/ --nographics -x "ks=http://172.21.110.213/KS/$machinename-ks.cfg ksdevice=eth0 ip=172.21.110.248 netmask=255.255.255.0 dns=172.21.110.2 gateway=172.21.110.1 console=ttyS0" -The following is working, virt-install -n $machinename -r $memory --vcpus=$cpus --os-variant=rhel6 --accelerate -v -w bridge:br0 --disk path=/home/vm/$machinename.img,size=100 -l http://172.21.110.213/6.3/ --nographics -x "ks=http://172.21.110.213/KS/$machinename-ks.cfg ksdevice=eth0 ip=172.21.110.248 netmask=255.255.255.0 dns=172.21.110.2 gateway=172.21.110.1 console=ttyS0" -What am I doing wrong? Thanks so much, Meir -----Original Message----- From: centos-virt-bounces@xxxxxxxxxx [mailto:centos-virt-bounces@xxxxxxxxxx] On Behalf Of Ilya Ponetayev Sent: Tuesday, April 02, 2013 4:20 PM To: Discussion about the virtualization on CentOS Subject: Re: Can I have more than 1 bridge attached to a KVM As far as I know the only way to directly assign real NICs into VM without bridging is to use PCI passthrough, though this way imposes several limitations, mostly in IOMMU / VT-d hardware support. But if bridging is acceptable then you can repeat --network bridge:<hypervisor_bridge_nic> option in virt-install command line several times to create as many NICs inside VM as you want. 02.04.2013 14:05, Meir Hazon пишет: > Thanks. The bridges are preconfigured at the box. No issues there. > Can I assign a second physical NiC as a second interface at the KVM? > Can I do it at the installation time using virt-install? Can I do it > by editing a file after the KVM is created? I would like to automate things. > Thank you > > Sent from my iPhone > > On Apr 2, 2013, at 11:36 AM, "Ilya Ponetayev" <instenet@xxxxxxxxx > <mailto:instenet@xxxxxxxxx>> wrote: > >> You can try to assign each bridge to its own individual virtual NIC >> in VM, at least it works with virt-manager + libvirt + qemu-kvm with >> preconfigured bridges. >> >> 02.04.2013 11:41 пользователь "Meir Hazon" <meir@xxxxxxxxxx >> <mailto:meir@xxxxxxxxxx>> написал: >> > >> > Hello Everybody, >> > >> > >> > >> > I have a physical machine with 4 Ethernet cards that I have mapped >> to 4 bridges. >> > >> > >> > >> > I would like to have each of my KVMs use 2 bridges for NIC bonding. >> > >> > >> > >> > 1. Can I have more than one bridge assign to one KVM? >> > >> > 2. Can I use virt-install to assign a KVM with more than one >> bridge during the KVM installation? >> > >> > a. It was a long shot but I have tried bridge=br0,br1 ; >> bridge=br0 bridge=br1 - never worked:.. >> > >> > >> > >> > Thanks so much, >> > >> > >> > >> > Meir >> > >> > >> > >> > >> > _______________________________________________ >> > CentOS-virt mailing list >> > CentOS-virt@xxxxxxxxxx <mailto:CentOS-virt@xxxxxxxxxx> >> > http://lists.centos.org/mailman/listinfo/centos-virt >> > >> >> _______________________________________________ >> CentOS-virt mailing list >> CentOS-virt@xxxxxxxxxx <mailto:CentOS-virt@xxxxxxxxxx> >> http://lists.centos.org/mailman/listinfo/centos-virt > > > _______________________________________________ > CentOS-virt mailing list > CentOS-virt@xxxxxxxxxx > http://lists.centos.org/mailman/listinfo/centos-virt > -- Sincerely yours, Ilya Ponetayev <instenet@xxxxxxxxx> _______________________________________________ CentOS-virt mailing list CentOS-virt@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos-virt
