----- "Tait Clarridge" <tait@xxxxxxxxxxxx> wrote: > Interesting, thanks for the info. Can I specify which VLANs it is > going > to configure and bridge? Example bridge interface: /etc/sysconfig/network-scripts/ifcfg-br10: DEVICE=br10 TYPE=Bridge BOOTPROTO=none ONBOOT=yes DELAY=0 STP=on Example vlan interface on a bridge (you can do this with physical interfaces, as well): /etc/sysconfig/network-scripts/ifcfg-bond0.10: DEVICE=bond0.10 BOOTPROTO=none ONBOOT=yes USERCTL=no VLAN=yes BRIDGE=br10 Example bonded slave physical interface: /etc/sysconfig/network-scripts/ifcfg-eth0: DEVICE=eth0 BOOTPROTO=none HWADDR=xx:xx:xx:xx:xx:xx ONBOOT=yes TYPE=Ethernet MASTER=bond0 SLAVE=yes USERCTL=no Example master for bonding: /etc/sysconfig/network-scripts/ifcfg-bond0: DEVICE=bond0 BOOTPROTO=none ONBOOT=yes USERCTL=no The bonding parameters are set in /etc/modprobe.conf. e.g.: alias bond0 bonding options bond0 mode=balance-rr miimon=100 updelay=1000 -- Christopher G. Stach II _______________________________________________ CentOS-virt mailing list CentOS-virt@xxxxxxxxxx http://lists.centos.org/mailman/listinfo/centos-virt
