In-Reply-To: <019201c4494b$9a3c1460$476ffc50@tera> Peter, I agree on that. For the external loggin. Look at www.wallwatcher.com. Its a great free tool written for linksys. Cheers, Jerry >Received: (qmail 11131 invoked from network); 3 Jun 2004 19:57:09 -0000 >Received: from outgoing.securityfocus.com (HELO outgoing3.securityfocus.com) (205.206.231.27) > by mail.securityfocus.com with SMTP; 3 Jun 2004 19:57:09 -0000 >Received: from lists2.securityfocus.com (lists2.securityfocus.com [205.206.231.20]) > by outgoing3.securityfocus.com (Postfix) with QMQP > id D892B236FD2; Thu, 3 Jun 2004 18:43:34 -0600 (MDT) >Mailing-List: contact bugtraq-help@xxxxxxxxxxxxxxxxx; run by ezmlm >Precedence: bulk >List-Id: <bugtraq.list-id.securityfocus.com> >List-Post: <mailto:bugtraq@xxxxxxxxxxxxxxxxx> >List-Help: <mailto:bugtraq-help@xxxxxxxxxxxxxxxxx> >List-Unsubscribe: <mailto:bugtraq-unsubscribe@xxxxxxxxxxxxxxxxx> >List-Subscribe: <mailto:bugtraq-subscribe@xxxxxxxxxxxxxxxxx> >Delivered-To: mailing list bugtraq@xxxxxxxxxxxxxxxxx >Delivered-To: moderator for bugtraq@xxxxxxxxxxxxxxxxx >Received: (qmail 1667 invoked from network); 3 Jun 2004 03:04:23 -0000 >Message-ID: <019201c4494b$9a3c1460$476ffc50@tera> >From: "Peter Becker" <peter.becker@xxxxxxxxxxxxx> >To: <bugtraq@xxxxxxxxxxxxxxxxx> >References: <C0BEC2592902BF45B8777C49B1F2A08C5485FA@xxxxxxxxxxxxxxxxxxxxxx> >Subject: Re: LinkSys WRT54G administration page availble to WAN >Date: Thu, 3 Jun 2004 11:17:27 +0200 >MIME-Version: 1.0 >Content-Type: text/plain; > charset="iso-8859-1" >Content-Transfer-Encoding: 7bit >X-Priority: 3 >X-MSMail-Priority: Normal >X-Mailer: Microsoft Outlook Express 6.00.2800.1409 >X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1409 > >> I have a WRT54G at home. After seeing all the discussion here about the >> remote administration vulnerability I tried to access the web interface >> today on ports 80 and 443 from outside of my home network and was not able >> to get to the web interface either. >> >> But, having said that, I'm still fairly disappointed with this product. >> Linksys used to incorporate SNMP support that made it possible to use >> Linklogger, a very inexpensive and capable firewall logger. But, it >appears >> that SNMP and syslog support are gone. I contacted tech support about >this >> and they agreed that the WRT54G has no support for external event logging. >> Too bad. > >There are several other firmwares for this product. >I use OpenWRT this is realy great. >I don't know, if the other firmware makes it possible to external event log, >but you could make nfs-mounts so you could write the eventlog on a >network-share. > >To the issue: >I tested the original firmware before flashing. >And I also wasn't able to access the webinterface from the wan-port. >I've got hardware revision 2. > > >Peter > >
