On Fri, 2 May 2003, Frank da Cruz wrote:
> These were fixed for C-Kermit 8.0 long ago. The current release of C-Kermit
> is 8.0.209. As far as I know, HP ships C-Kermit 8.0.200 or later with all
> HP-UX 11.xx's. I suspect anybody who has "C-Kermit 6.0.192, 6 Sep 96, for
> HP-UX 10.00" on HP-UX 11.00 or later must have upgraded their HP-UX version
> without also upgrading Kermit. If you have an older version of C-Kermit on
> ANY release of HP-UX all the way back to 5.21, you can get the current
> release here:
I fresh installed HP-UX 11.i has "C-Kermit 7.0.197, 8 Feb 2000, for HP-UX
11.00".
> The syntax for the ASK command requires a variable name after the word
> ASK. Anyway, try it in C-Kermit 8.0:
>
> /usr/bin/kermit -C "ask foo `perl -e 'print "A" x 800'`"
>
> If you increase 800 to some bigger number, the string is properly cut
> off at the end of the ASK prompt buffer.
The HP-Version seems to be immune even with higher numbers.
Regards,
Elmar
--
_____________________________________________________________________
| |
| knipp | Knipp Medien und Kommunikation GmbH
------- Technologiepark
Martin-Schmeisser-Weg 9
44227 Dortmund
Germany
Fon: +49 231 9703-0
Elmar.Knipp@knipp.de Fax: +49 231 9703-200
