[PATCH v2 bpf-next 6/7] bpf: drop knowledge-losing __reg_combine_{32,64}_into_{64,32} logic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



When performing 32-bit conditional operation operating on lower 32 bits
of a full 64-bit register, register full value isn't changed. We just
potentially gain new knowledge about that register's lower 32 bits.

Unfortunately, __reg_combine_{32,64}_into_{64,32} logic that
reg_set_min_max() performs as a last step, can lose information in some
cases due to __mark_reg64_unbounded() and __reg_assign_32_into_64().
That's bad and completely unnecessary. Especially __reg_assign_32_into_64()
looks completely out of place here, because we are not performing
zero-extending subregister assignment during conditional jump.

So this patch replaced __reg_combine_* with just a normal
reg_bounds_sync() which will do a proper job of deriving u64/s64 bounds
from u32/s32, and vice versa (among all other combinations).

__reg_combine_64_into_32() is also used in one more place,
coerce_reg_to_size(), while handling 1- and 2-byte register loads.
Looking into this, it seems like besides marking subregister as
unbounded before performing reg_bounds_sync(), we were also performing
deduction of smin32/smax32 and umin32/umax32 bounds from respective
smin/smax and umin/umax bounds. It's now redundant as reg_bounds_sync()
performs all the same logic more generically (e.g., without unnecessary
assumption that upper 32 bits of full register should be zero).

Long story short, we remove __reg_combine_64_into_32() completely, and
coerce_reg_to_size() now only does resetting subreg to unbounded and then
performing reg_bounds_sync() to recover as much information as possible
from 64-bit umin/umax and smin/smax bounds, set explicitly in
coerce_reg_to_size() earlier.

Signed-off-by: Andrii Nakryiko <andrii@xxxxxxxxxx>
---
 kernel/bpf/verifier.c | 60 ++++++-------------------------------------
 1 file changed, 8 insertions(+), 52 deletions(-)

diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
index cf5cd6bf8652..a603ac82d50c 100644
--- a/kernel/bpf/verifier.c
+++ b/kernel/bpf/verifier.c
@@ -2348,51 +2348,6 @@ static void __reg_assign_32_into_64(struct bpf_reg_state *reg)
 	}
 }
 
-static void __reg_combine_32_into_64(struct bpf_reg_state *reg)
-{
-	/* special case when 64-bit register has upper 32-bit register
-	 * zeroed. Typically happens after zext or <<32, >>32 sequence
-	 * allowing us to use 32-bit bounds directly,
-	 */
-	if (tnum_equals_const(tnum_clear_subreg(reg->var_off), 0)) {
-		__reg_assign_32_into_64(reg);
-	} else {
-		/* Otherwise the best we can do is push lower 32bit known and
-		 * unknown bits into register (var_off set from jmp logic)
-		 * then learn as much as possible from the 64-bit tnum
-		 * known and unknown bits. The previous smin/smax bounds are
-		 * invalid here because of jmp32 compare so mark them unknown
-		 * so they do not impact tnum bounds calculation.
-		 */
-		__mark_reg64_unbounded(reg);
-	}
-	reg_bounds_sync(reg);
-}
-
-static bool __reg64_bound_s32(s64 a)
-{
-	return a >= S32_MIN && a <= S32_MAX;
-}
-
-static bool __reg64_bound_u32(u64 a)
-{
-	return a >= U32_MIN && a <= U32_MAX;
-}
-
-static void __reg_combine_64_into_32(struct bpf_reg_state *reg)
-{
-	__mark_reg32_unbounded(reg);
-	if (__reg64_bound_s32(reg->smin_value) && __reg64_bound_s32(reg->smax_value)) {
-		reg->s32_min_value = (s32)reg->smin_value;
-		reg->s32_max_value = (s32)reg->smax_value;
-	}
-	if (__reg64_bound_u32(reg->umin_value) && __reg64_bound_u32(reg->umax_value)) {
-		reg->u32_min_value = (u32)reg->umin_value;
-		reg->u32_max_value = (u32)reg->umax_value;
-	}
-	reg_bounds_sync(reg);
-}
-
 /* Mark a register as having a completely unknown (scalar) value. */
 static void __mark_reg_unknown(const struct bpf_verifier_env *env,
 			       struct bpf_reg_state *reg)
@@ -6089,9 +6044,10 @@ static void coerce_reg_to_size(struct bpf_reg_state *reg, int size)
 	 * values are also truncated so we push 64-bit bounds into
 	 * 32-bit bounds. Above were truncated < 32-bits already.
 	 */
-	if (size >= 4)
-		return;
-	__reg_combine_64_into_32(reg);
+	if (size < 4) {
+		__mark_reg32_unbounded(reg);
+		reg_bounds_sync(reg);
+	}
 }
 
 static void set_sext64_default_val(struct bpf_reg_state *reg, int size)
@@ -14169,13 +14125,13 @@ static void reg_set_min_max(struct bpf_reg_state *true_reg,
 					     tnum_subreg(false_32off));
 		true_reg->var_off = tnum_or(tnum_clear_subreg(true_64off),
 					    tnum_subreg(true_32off));
-		__reg_combine_32_into_64(false_reg);
-		__reg_combine_32_into_64(true_reg);
+		reg_bounds_sync(false_reg);
+		reg_bounds_sync(true_reg);
 	} else {
 		false_reg->var_off = false_64off;
 		true_reg->var_off = true_64off;
-		__reg_combine_64_into_32(false_reg);
-		__reg_combine_64_into_32(true_reg);
+		reg_bounds_sync(false_reg);
+		reg_bounds_sync(true_reg);
 	}
 }
 
-- 
2.34.1






[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux