This file will be used by mini_uring.h and allow tests to run without
the need of installing liburing to run the tests.
This is needed to run io_uring tests in BPF, such as
(tools/testing/selftests/bpf/prog_tests/sockopt.c).
Signed-off-by: Breno Leitao <leitao@xxxxxxxxxx>
---
tools/include/uapi/linux/io_uring.h | 757 ++++++++++++++++++++++++++++
1 file changed, 757 insertions(+)
create mode 100644 tools/include/uapi/linux/io_uring.h
diff --git a/tools/include/uapi/linux/io_uring.h b/tools/include/uapi/linux/io_uring.h
new file mode 100644
index 000000000000..f1c16f817742
--- /dev/null
+++ b/tools/include/uapi/linux/io_uring.h
@@ -0,0 +1,757 @@
+/* SPDX-License-Identifier: (GPL-2.0 WITH Linux-syscall-note) OR MIT */
+/*
+ * Header file for the io_uring interface.
+ *
+ * Copyright (C) 2019 Jens Axboe
+ * Copyright (C) 2019 Christoph Hellwig
+ */
+#ifndef LINUX_IO_URING_H
+#define LINUX_IO_URING_H
+
+#include <linux/fs.h>
+#include <linux/types.h>
+/*
+ * this file is shared with liburing and that has to autodetect
+ * if linux/time_types.h is available or not, it can
+ * define UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H
+ * if linux/time_types.h is not available
+ */
+#ifndef UAPI_LINUX_IO_URING_H_SKIP_LINUX_TIME_TYPES_H
+#include <linux/time_types.h>
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * IO submission data structure (Submission Queue Entry)
+ */
+struct io_uring_sqe {
+ __u8 opcode; /* type of operation for this sqe */
+ __u8 flags; /* IOSQE_ flags */
+ __u16 ioprio; /* ioprio for the request */
+ __s32 fd; /* file descriptor to do IO on */
+ union {
+ __u64 off; /* offset into file */
+ __u64 addr2;
+ struct {
+ __u32 cmd_op;
+ __u32 __pad1;
+ };
+ };
+ union {
+ __u64 addr; /* pointer to buffer or iovecs */
+ __u64 splice_off_in;
+ struct {
+ __u32 level;
+ __u32 optname;
+ };
+ };
+ __u32 len; /* buffer size or number of iovecs */
+ union {
+ __kernel_rwf_t rw_flags;
+ __u32 fsync_flags;
+ __u16 poll_events; /* compatibility */
+ __u32 poll32_events; /* word-reversed for BE */
+ __u32 sync_range_flags;
+ __u32 msg_flags;
+ __u32 timeout_flags;
+ __u32 accept_flags;
+ __u32 cancel_flags;
+ __u32 open_flags;
+ __u32 statx_flags;
+ __u32 fadvise_advice;
+ __u32 splice_flags;
+ __u32 rename_flags;
+ __u32 unlink_flags;
+ __u32 hardlink_flags;
+ __u32 xattr_flags;
+ __u32 msg_ring_flags;
+ __u32 uring_cmd_flags;
+ __u32 waitid_flags;
+ __u32 futex_flags;
+ };
+ __u64 user_data; /* data to be passed back at completion time */
+ /* pack this to avoid bogus arm OABI complaints */
+ union {
+ /* index into fixed buffers, if used */
+ __u16 buf_index;
+ /* for grouped buffer selection */
+ __u16 buf_group;
+ } __attribute__((packed));
+ /* personality to use, if used */
+ __u16 personality;
+ union {
+ __s32 splice_fd_in;
+ __u32 file_index;
+ __u32 optlen;
+ struct {
+ __u16 addr_len;
+ __u16 __pad3[1];
+ };
+ };
+ union {
+ struct {
+ __u64 addr3;
+ __u64 __pad2[1];
+ };
+ __u64 optval;
+ /*
+ * If the ring is initialized with IORING_SETUP_SQE128, then
+ * this field is used for 80 bytes of arbitrary command data
+ */
+ __u8 cmd[0];
+ };
+};
+
+/*
+ * If sqe->file_index is set to this for opcodes that instantiate a new
+ * direct descriptor (like openat/openat2/accept), then io_uring will allocate
+ * an available direct descriptor instead of having the application pass one
+ * in. The picked direct descriptor will be returned in cqe->res, or -ENFILE
+ * if the space is full.
+ */
+#define IORING_FILE_INDEX_ALLOC (~0U)
+
+enum {
+ IOSQE_FIXED_FILE_BIT,
+ IOSQE_IO_DRAIN_BIT,
+ IOSQE_IO_LINK_BIT,
+ IOSQE_IO_HARDLINK_BIT,
+ IOSQE_ASYNC_BIT,
+ IOSQE_BUFFER_SELECT_BIT,
+ IOSQE_CQE_SKIP_SUCCESS_BIT,
+};
+
+/*
+ * sqe->flags
+ */
+/* use fixed fileset */
+#define IOSQE_FIXED_FILE (1U << IOSQE_FIXED_FILE_BIT)
+/* issue after inflight IO */
+#define IOSQE_IO_DRAIN (1U << IOSQE_IO_DRAIN_BIT)
+/* links next sqe */
+#define IOSQE_IO_LINK (1U << IOSQE_IO_LINK_BIT)
+/* like LINK, but stronger */
+#define IOSQE_IO_HARDLINK (1U << IOSQE_IO_HARDLINK_BIT)
+/* always go async */
+#define IOSQE_ASYNC (1U << IOSQE_ASYNC_BIT)
+/* select buffer from sqe->buf_group */
+#define IOSQE_BUFFER_SELECT (1U << IOSQE_BUFFER_SELECT_BIT)
+/* don't post CQE if request succeeded */
+#define IOSQE_CQE_SKIP_SUCCESS (1U << IOSQE_CQE_SKIP_SUCCESS_BIT)
+
+/*
+ * io_uring_setup() flags
+ */
+#define IORING_SETUP_IOPOLL (1U << 0) /* io_context is polled */
+#define IORING_SETUP_SQPOLL (1U << 1) /* SQ poll thread */
+#define IORING_SETUP_SQ_AFF (1U << 2) /* sq_thread_cpu is valid */
+#define IORING_SETUP_CQSIZE (1U << 3) /* app defines CQ size */
+#define IORING_SETUP_CLAMP (1U << 4) /* clamp SQ/CQ ring sizes */
+#define IORING_SETUP_ATTACH_WQ (1U << 5) /* attach to existing wq */
+#define IORING_SETUP_R_DISABLED (1U << 6) /* start with ring disabled */
+#define IORING_SETUP_SUBMIT_ALL (1U << 7) /* continue submit on error */
+/*
+ * Cooperative task running. When requests complete, they often require
+ * forcing the submitter to transition to the kernel to complete. If this
+ * flag is set, work will be done when the task transitions anyway, rather
+ * than force an inter-processor interrupt reschedule. This avoids interrupting
+ * a task running in userspace, and saves an IPI.
+ */
+#define IORING_SETUP_COOP_TASKRUN (1U << 8)
+/*
+ * If COOP_TASKRUN is set, get notified if task work is available for
+ * running and a kernel transition would be needed to run it. This sets
+ * IORING_SQ_TASKRUN in the sq ring flags. Not valid with COOP_TASKRUN.
+ */
+#define IORING_SETUP_TASKRUN_FLAG (1U << 9)
+#define IORING_SETUP_SQE128 (1U << 10) /* SQEs are 128 byte */
+#define IORING_SETUP_CQE32 (1U << 11) /* CQEs are 32 byte */
+/*
+ * Only one task is allowed to submit requests
+ */
+#define IORING_SETUP_SINGLE_ISSUER (1U << 12)
+
+/*
+ * Defer running task work to get events.
+ * Rather than running bits of task work whenever the task transitions
+ * try to do it just before it is needed.
+ */
+#define IORING_SETUP_DEFER_TASKRUN (1U << 13)
+
+/*
+ * Application provides the memory for the rings
+ */
+#define IORING_SETUP_NO_MMAP (1U << 14)
+
+/*
+ * Register the ring fd in itself for use with
+ * IORING_REGISTER_USE_REGISTERED_RING; return a registered fd index rather
+ * than an fd.
+ */
+#define IORING_SETUP_REGISTERED_FD_ONLY (1U << 15)
+
+/*
+ * Removes indirection through the SQ index array.
+ */
+#define IORING_SETUP_NO_SQARRAY (1U << 16)
+
+enum io_uring_op {
+ IORING_OP_NOP,
+ IORING_OP_READV,
+ IORING_OP_WRITEV,
+ IORING_OP_FSYNC,
+ IORING_OP_READ_FIXED,
+ IORING_OP_WRITE_FIXED,
+ IORING_OP_POLL_ADD,
+ IORING_OP_POLL_REMOVE,
+ IORING_OP_SYNC_FILE_RANGE,
+ IORING_OP_SENDMSG,
+ IORING_OP_RECVMSG,
+ IORING_OP_TIMEOUT,
+ IORING_OP_TIMEOUT_REMOVE,
+ IORING_OP_ACCEPT,
+ IORING_OP_ASYNC_CANCEL,
+ IORING_OP_LINK_TIMEOUT,
+ IORING_OP_CONNECT,
+ IORING_OP_FALLOCATE,
+ IORING_OP_OPENAT,
+ IORING_OP_CLOSE,
+ IORING_OP_FILES_UPDATE,
+ IORING_OP_STATX,
+ IORING_OP_READ,
+ IORING_OP_WRITE,
+ IORING_OP_FADVISE,
+ IORING_OP_MADVISE,
+ IORING_OP_SEND,
+ IORING_OP_RECV,
+ IORING_OP_OPENAT2,
+ IORING_OP_EPOLL_CTL,
+ IORING_OP_SPLICE,
+ IORING_OP_PROVIDE_BUFFERS,
+ IORING_OP_REMOVE_BUFFERS,
+ IORING_OP_TEE,
+ IORING_OP_SHUTDOWN,
+ IORING_OP_RENAMEAT,
+ IORING_OP_UNLINKAT,
+ IORING_OP_MKDIRAT,
+ IORING_OP_SYMLINKAT,
+ IORING_OP_LINKAT,
+ IORING_OP_MSG_RING,
+ IORING_OP_FSETXATTR,
+ IORING_OP_SETXATTR,
+ IORING_OP_FGETXATTR,
+ IORING_OP_GETXATTR,
+ IORING_OP_SOCKET,
+ IORING_OP_URING_CMD,
+ IORING_OP_SEND_ZC,
+ IORING_OP_SENDMSG_ZC,
+ IORING_OP_READ_MULTISHOT,
+ IORING_OP_WAITID,
+ IORING_OP_FUTEX_WAIT,
+ IORING_OP_FUTEX_WAKE,
+ IORING_OP_FUTEX_WAITV,
+
+ /* this goes last, obviously */
+ IORING_OP_LAST,
+};
+
+/*
+ * sqe->uring_cmd_flags top 8bits aren't available for userspace
+ * IORING_URING_CMD_FIXED use registered buffer; pass this flag
+ * along with setting sqe->buf_index.
+ */
+#define IORING_URING_CMD_FIXED (1U << 0)
+#define IORING_URING_CMD_MASK IORING_URING_CMD_FIXED
+
+
+/*
+ * sqe->fsync_flags
+ */
+#define IORING_FSYNC_DATASYNC (1U << 0)
+
+/*
+ * sqe->timeout_flags
+ */
+#define IORING_TIMEOUT_ABS (1U << 0)
+#define IORING_TIMEOUT_UPDATE (1U << 1)
+#define IORING_TIMEOUT_BOOTTIME (1U << 2)
+#define IORING_TIMEOUT_REALTIME (1U << 3)
+#define IORING_LINK_TIMEOUT_UPDATE (1U << 4)
+#define IORING_TIMEOUT_ETIME_SUCCESS (1U << 5)
+#define IORING_TIMEOUT_MULTISHOT (1U << 6)
+#define IORING_TIMEOUT_CLOCK_MASK (IORING_TIMEOUT_BOOTTIME | IORING_TIMEOUT_REALTIME)
+#define IORING_TIMEOUT_UPDATE_MASK (IORING_TIMEOUT_UPDATE | IORING_LINK_TIMEOUT_UPDATE)
+/*
+ * sqe->splice_flags
+ * extends splice(2) flags
+ */
+#define SPLICE_F_FD_IN_FIXED (1U << 31) /* the last bit of __u32 */
+
+/*
+ * POLL_ADD flags. Note that since sqe->poll_events is the flag space, the
+ * command flags for POLL_ADD are stored in sqe->len.
+ *
+ * IORING_POLL_ADD_MULTI Multishot poll. Sets IORING_CQE_F_MORE if
+ * the poll handler will continue to report
+ * CQEs on behalf of the same SQE.
+ *
+ * IORING_POLL_UPDATE Update existing poll request, matching
+ * sqe->addr as the old user_data field.
+ *
+ * IORING_POLL_LEVEL Level triggered poll.
+ */
+#define IORING_POLL_ADD_MULTI (1U << 0)
+#define IORING_POLL_UPDATE_EVENTS (1U << 1)
+#define IORING_POLL_UPDATE_USER_DATA (1U << 2)
+#define IORING_POLL_ADD_LEVEL (1U << 3)
+
+/*
+ * ASYNC_CANCEL flags.
+ *
+ * IORING_ASYNC_CANCEL_ALL Cancel all requests that match the given key
+ * IORING_ASYNC_CANCEL_FD Key off 'fd' for cancelation rather than the
+ * request 'user_data'
+ * IORING_ASYNC_CANCEL_ANY Match any request
+ * IORING_ASYNC_CANCEL_FD_FIXED 'fd' passed in is a fixed descriptor
+ * IORING_ASYNC_CANCEL_USERDATA Match on user_data, default for no other key
+ * IORING_ASYNC_CANCEL_OP Match request based on opcode
+ */
+#define IORING_ASYNC_CANCEL_ALL (1U << 0)
+#define IORING_ASYNC_CANCEL_FD (1U << 1)
+#define IORING_ASYNC_CANCEL_ANY (1U << 2)
+#define IORING_ASYNC_CANCEL_FD_FIXED (1U << 3)
+#define IORING_ASYNC_CANCEL_USERDATA (1U << 4)
+#define IORING_ASYNC_CANCEL_OP (1U << 5)
+
+/*
+ * send/sendmsg and recv/recvmsg flags (sqe->ioprio)
+ *
+ * IORING_RECVSEND_POLL_FIRST If set, instead of first attempting to send
+ * or receive and arm poll if that yields an
+ * -EAGAIN result, arm poll upfront and skip
+ * the initial transfer attempt.
+ *
+ * IORING_RECV_MULTISHOT Multishot recv. Sets IORING_CQE_F_MORE if
+ * the handler will continue to report
+ * CQEs on behalf of the same SQE.
+ *
+ * IORING_RECVSEND_FIXED_BUF Use registered buffers, the index is stored in
+ * the buf_index field.
+ *
+ * IORING_SEND_ZC_REPORT_USAGE
+ * If set, SEND[MSG]_ZC should report
+ * the zerocopy usage in cqe.res
+ * for the IORING_CQE_F_NOTIF cqe.
+ * 0 is reported if zerocopy was actually possible.
+ * IORING_NOTIF_USAGE_ZC_COPIED if data was copied
+ * (at least partially).
+ */
+#define IORING_RECVSEND_POLL_FIRST (1U << 0)
+#define IORING_RECV_MULTISHOT (1U << 1)
+#define IORING_RECVSEND_FIXED_BUF (1U << 2)
+#define IORING_SEND_ZC_REPORT_USAGE (1U << 3)
+
+/*
+ * cqe.res for IORING_CQE_F_NOTIF if
+ * IORING_SEND_ZC_REPORT_USAGE was requested
+ *
+ * It should be treated as a flag, all other
+ * bits of cqe.res should be treated as reserved!
+ */
+#define IORING_NOTIF_USAGE_ZC_COPIED (1U << 31)
+
+/*
+ * accept flags stored in sqe->ioprio
+ */
+#define IORING_ACCEPT_MULTISHOT (1U << 0)
+
+/*
+ * IORING_OP_MSG_RING command types, stored in sqe->addr
+ */
+enum {
+ IORING_MSG_DATA, /* pass sqe->len as 'res' and off as user_data */
+ IORING_MSG_SEND_FD, /* send a registered fd to another ring */
+};
+
+/*
+ * IORING_OP_MSG_RING flags (sqe->msg_ring_flags)
+ *
+ * IORING_MSG_RING_CQE_SKIP Don't post a CQE to the target ring. Not
+ * applicable for IORING_MSG_DATA, obviously.
+ */
+#define IORING_MSG_RING_CQE_SKIP (1U << 0)
+/* Pass through the flags from sqe->file_index to cqe->flags */
+#define IORING_MSG_RING_FLAGS_PASS (1U << 1)
+
+/*
+ * IO completion data structure (Completion Queue Entry)
+ */
+struct io_uring_cqe {
+ __u64 user_data; /* sqe->data submission passed back */
+ __s32 res; /* result code for this event */
+ __u32 flags;
+
+ /*
+ * If the ring is initialized with IORING_SETUP_CQE32, then this field
+ * contains 16-bytes of padding, doubling the size of the CQE.
+ */
+ __u64 big_cqe[];
+};
+
+/*
+ * cqe->flags
+ *
+ * IORING_CQE_F_BUFFER If set, the upper 16 bits are the buffer ID
+ * IORING_CQE_F_MORE If set, parent SQE will generate more CQE entries
+ * IORING_CQE_F_SOCK_NONEMPTY If set, more data to read after socket recv
+ * IORING_CQE_F_NOTIF Set for notification CQEs. Can be used to distinct
+ * them from sends.
+ */
+#define IORING_CQE_F_BUFFER (1U << 0)
+#define IORING_CQE_F_MORE (1U << 1)
+#define IORING_CQE_F_SOCK_NONEMPTY (1U << 2)
+#define IORING_CQE_F_NOTIF (1U << 3)
+
+enum {
+ IORING_CQE_BUFFER_SHIFT = 16,
+};
+
+/*
+ * Magic offsets for the application to mmap the data it needs
+ */
+#define IORING_OFF_SQ_RING 0ULL
+#define IORING_OFF_CQ_RING 0x8000000ULL
+#define IORING_OFF_SQES 0x10000000ULL
+#define IORING_OFF_PBUF_RING 0x80000000ULL
+#define IORING_OFF_PBUF_SHIFT 16
+#define IORING_OFF_MMAP_MASK 0xf8000000ULL
+
+/*
+ * Filled with the offset for mmap(2)
+ */
+struct io_sqring_offsets {
+ __u32 head;
+ __u32 tail;
+ __u32 ring_mask;
+ __u32 ring_entries;
+ __u32 flags;
+ __u32 dropped;
+ __u32 array;
+ __u32 resv1;
+ __u64 user_addr;
+};
+
+/*
+ * sq_ring->flags
+ */
+#define IORING_SQ_NEED_WAKEUP (1U << 0) /* needs io_uring_enter wakeup */
+#define IORING_SQ_CQ_OVERFLOW (1U << 1) /* CQ ring is overflown */
+#define IORING_SQ_TASKRUN (1U << 2) /* task should enter the kernel */
+
+struct io_cqring_offsets {
+ __u32 head;
+ __u32 tail;
+ __u32 ring_mask;
+ __u32 ring_entries;
+ __u32 overflow;
+ __u32 cqes;
+ __u32 flags;
+ __u32 resv1;
+ __u64 user_addr;
+};
+
+/*
+ * cq_ring->flags
+ */
+
+/* disable eventfd notifications */
+#define IORING_CQ_EVENTFD_DISABLED (1U << 0)
+
+/*
+ * io_uring_enter(2) flags
+ */
+#define IORING_ENTER_GETEVENTS (1U << 0)
+#define IORING_ENTER_SQ_WAKEUP (1U << 1)
+#define IORING_ENTER_SQ_WAIT (1U << 2)
+#define IORING_ENTER_EXT_ARG (1U << 3)
+#define IORING_ENTER_REGISTERED_RING (1U << 4)
+
+/*
+ * Passed in for io_uring_setup(2). Copied back with updated info on success
+ */
+struct io_uring_params {
+ __u32 sq_entries;
+ __u32 cq_entries;
+ __u32 flags;
+ __u32 sq_thread_cpu;
+ __u32 sq_thread_idle;
+ __u32 features;
+ __u32 wq_fd;
+ __u32 resv[3];
+ struct io_sqring_offsets sq_off;
+ struct io_cqring_offsets cq_off;
+};
+
+/*
+ * io_uring_params->features flags
+ */
+#define IORING_FEAT_SINGLE_MMAP (1U << 0)
+#define IORING_FEAT_NODROP (1U << 1)
+#define IORING_FEAT_SUBMIT_STABLE (1U << 2)
+#define IORING_FEAT_RW_CUR_POS (1U << 3)
+#define IORING_FEAT_CUR_PERSONALITY (1U << 4)
+#define IORING_FEAT_FAST_POLL (1U << 5)
+#define IORING_FEAT_POLL_32BITS (1U << 6)
+#define IORING_FEAT_SQPOLL_NONFIXED (1U << 7)
+#define IORING_FEAT_EXT_ARG (1U << 8)
+#define IORING_FEAT_NATIVE_WORKERS (1U << 9)
+#define IORING_FEAT_RSRC_TAGS (1U << 10)
+#define IORING_FEAT_CQE_SKIP (1U << 11)
+#define IORING_FEAT_LINKED_FILE (1U << 12)
+#define IORING_FEAT_REG_REG_RING (1U << 13)
+
+/*
+ * io_uring_register(2) opcodes and arguments
+ */
+enum {
+ IORING_REGISTER_BUFFERS = 0,
+ IORING_UNREGISTER_BUFFERS = 1,
+ IORING_REGISTER_FILES = 2,
+ IORING_UNREGISTER_FILES = 3,
+ IORING_REGISTER_EVENTFD = 4,
+ IORING_UNREGISTER_EVENTFD = 5,
+ IORING_REGISTER_FILES_UPDATE = 6,
+ IORING_REGISTER_EVENTFD_ASYNC = 7,
+ IORING_REGISTER_PROBE = 8,
+ IORING_REGISTER_PERSONALITY = 9,
+ IORING_UNREGISTER_PERSONALITY = 10,
+ IORING_REGISTER_RESTRICTIONS = 11,
+ IORING_REGISTER_ENABLE_RINGS = 12,
+
+ /* extended with tagging */
+ IORING_REGISTER_FILES2 = 13,
+ IORING_REGISTER_FILES_UPDATE2 = 14,
+ IORING_REGISTER_BUFFERS2 = 15,
+ IORING_REGISTER_BUFFERS_UPDATE = 16,
+
+ /* set/clear io-wq thread affinities */
+ IORING_REGISTER_IOWQ_AFF = 17,
+ IORING_UNREGISTER_IOWQ_AFF = 18,
+
+ /* set/get max number of io-wq workers */
+ IORING_REGISTER_IOWQ_MAX_WORKERS = 19,
+
+ /* register/unregister io_uring fd with the ring */
+ IORING_REGISTER_RING_FDS = 20,
+ IORING_UNREGISTER_RING_FDS = 21,
+
+ /* register ring based provide buffer group */
+ IORING_REGISTER_PBUF_RING = 22,
+ IORING_UNREGISTER_PBUF_RING = 23,
+
+ /* sync cancelation API */
+ IORING_REGISTER_SYNC_CANCEL = 24,
+
+ /* register a range of fixed file slots for automatic slot allocation */
+ IORING_REGISTER_FILE_ALLOC_RANGE = 25,
+
+ /* this goes last */
+ IORING_REGISTER_LAST,
+
+ /* flag added to the opcode to use a registered ring fd */
+ IORING_REGISTER_USE_REGISTERED_RING = 1U << 31
+};
+
+/* io-wq worker categories */
+enum {
+ IO_WQ_BOUND,
+ IO_WQ_UNBOUND,
+};
+
+/* deprecated, see struct io_uring_rsrc_update */
+struct io_uring_files_update {
+ __u32 offset;
+ __u32 resv;
+ __aligned_u64 /* __s32 * */ fds;
+};
+
+/*
+ * Register a fully sparse file space, rather than pass in an array of all
+ * -1 file descriptors.
+ */
+#define IORING_RSRC_REGISTER_SPARSE (1U << 0)
+
+struct io_uring_rsrc_register {
+ __u32 nr;
+ __u32 flags;
+ __u64 resv2;
+ __aligned_u64 data;
+ __aligned_u64 tags;
+};
+
+struct io_uring_rsrc_update {
+ __u32 offset;
+ __u32 resv;
+ __aligned_u64 data;
+};
+
+struct io_uring_rsrc_update2 {
+ __u32 offset;
+ __u32 resv;
+ __aligned_u64 data;
+ __aligned_u64 tags;
+ __u32 nr;
+ __u32 resv2;
+};
+
+/* Skip updating fd indexes set to this value in the fd table */
+#define IORING_REGISTER_FILES_SKIP (-2)
+
+#define IO_URING_OP_SUPPORTED (1U << 0)
+
+struct io_uring_probe_op {
+ __u8 op;
+ __u8 resv;
+ __u16 flags; /* IO_URING_OP_* flags */
+ __u32 resv2;
+};
+
+struct io_uring_probe {
+ __u8 last_op; /* last opcode supported */
+ __u8 ops_len; /* length of ops[] array below */
+ __u16 resv;
+ __u32 resv2[3];
+ struct io_uring_probe_op ops[];
+};
+
+struct io_uring_restriction {
+ __u16 opcode;
+ union {
+ __u8 register_op; /* IORING_RESTRICTION_REGISTER_OP */
+ __u8 sqe_op; /* IORING_RESTRICTION_SQE_OP */
+ __u8 sqe_flags; /* IORING_RESTRICTION_SQE_FLAGS_* */
+ };
+ __u8 resv;
+ __u32 resv2[3];
+};
+
+struct io_uring_buf {
+ __u64 addr;
+ __u32 len;
+ __u16 bid;
+ __u16 resv;
+};
+
+struct io_uring_buf_ring {
+ union {
+ /*
+ * To avoid spilling into more pages than we need to, the
+ * ring tail is overlaid with the io_uring_buf->resv field.
+ */
+ struct {
+ __u64 resv1;
+ __u32 resv2;
+ __u16 resv3;
+ __u16 tail;
+ };
+ __DECLARE_FLEX_ARRAY(struct io_uring_buf, bufs);
+ };
+};
+
+/*
+ * Flags for IORING_REGISTER_PBUF_RING.
+ *
+ * IOU_PBUF_RING_MMAP: If set, kernel will allocate the memory for the ring.
+ * The application must not set a ring_addr in struct
+ * io_uring_buf_reg, instead it must subsequently call
+ * mmap(2) with the offset set as:
+ * IORING_OFF_PBUF_RING | (bgid << IORING_OFF_PBUF_SHIFT)
+ * to get a virtual mapping for the ring.
+ */
+enum {
+ IOU_PBUF_RING_MMAP = 1,
+};
+
+/* argument for IORING_(UN)REGISTER_PBUF_RING */
+struct io_uring_buf_reg {
+ __u64 ring_addr;
+ __u32 ring_entries;
+ __u16 bgid;
+ __u16 flags;
+ __u64 resv[3];
+};
+
+/*
+ * io_uring_restriction->opcode values
+ */
+enum {
+ /* Allow an io_uring_register(2) opcode */
+ IORING_RESTRICTION_REGISTER_OP = 0,
+
+ /* Allow an sqe opcode */
+ IORING_RESTRICTION_SQE_OP = 1,
+
+ /* Allow sqe flags */
+ IORING_RESTRICTION_SQE_FLAGS_ALLOWED = 2,
+
+ /* Require sqe flags (these flags must be set on each submission) */
+ IORING_RESTRICTION_SQE_FLAGS_REQUIRED = 3,
+
+ IORING_RESTRICTION_LAST
+};
+
+struct io_uring_getevents_arg {
+ __u64 sigmask;
+ __u32 sigmask_sz;
+ __u32 pad;
+ __u64 ts;
+};
+
+/*
+ * Argument for IORING_REGISTER_SYNC_CANCEL
+ */
+struct io_uring_sync_cancel_reg {
+ __u64 addr;
+ __s32 fd;
+ __u32 flags;
+ struct __kernel_timespec timeout;
+ __u8 opcode;
+ __u8 pad[7];
+ __u64 pad2[3];
+};
+
+/*
+ * Argument for IORING_REGISTER_FILE_ALLOC_RANGE
+ * The range is specified as [off, off + len)
+ */
+struct io_uring_file_index_range {
+ __u32 off;
+ __u32 len;
+ __u64 resv;
+};
+
+struct io_uring_recvmsg_out {
+ __u32 namelen;
+ __u32 controllen;
+ __u32 payloadlen;
+ __u32 flags;
+};
+
+/*
+ * Argument for IORING_OP_URING_CMD when file is a socket
+ */
+enum {
+ SOCKET_URING_OP_SIOCINQ = 0,
+ SOCKET_URING_OP_SIOCOUTQ,
+ SOCKET_URING_OP_GETSOCKOPT,
+ SOCKET_URING_OP_SETSOCKOPT,
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--
2.34.1
