On Fri, 25 Aug 2023 at 14:45, Maciej Fijalkowski
<maciej.fijalkowski@xxxxxxxxx> wrote:
>
> On Thu, Aug 24, 2023 at 02:28:49PM +0200, Magnus Karlsson wrote:
> > From: Magnus Karlsson <magnus.karlsson@xxxxxxxxx>
> >
> > Add a command line option to be able to run a single test. This option
> > (-t) takes a number from the list of tests available with the "-l"
> > option. Here are two examples:
> >
> > Run test number 2, the "receive single packet" test in all available modes:
> >
> > ./test_xsk.sh -t 2
> >
> > Run test number 21, the metadata copy test in skb mode only
> >
> > ./test_xsh.sh -t 21 -m skb
> >
> > Signed-off-by: Magnus Karlsson <magnus.karlsson@xxxxxxxxx>
> > ---
> > tools/testing/selftests/bpf/test_xsk.sh | 10 +++-
> > tools/testing/selftests/bpf/xskxceiver.c | 58 ++++++++++++++++--------
> > tools/testing/selftests/bpf/xskxceiver.h | 3 ++
> > 3 files changed, 52 insertions(+), 19 deletions(-)
> >
> > diff --git a/tools/testing/selftests/bpf/test_xsk.sh b/tools/testing/selftests/bpf/test_xsk.sh
> > index 489101922984..b7186ae48497 100755
> > --- a/tools/testing/selftests/bpf/test_xsk.sh
> > +++ b/tools/testing/selftests/bpf/test_xsk.sh
> > @@ -79,12 +79,15 @@
> > #
> > # List available tests
> > # ./test_xsk.sh -l
> > +#
> > +# Run a specific test from the test suite
> > +# sudo ./test_xsk.sh -t TEST_NAME
> >
> > . xsk_prereqs.sh
> >
> > ETH=""
> >
> > -while getopts "vi:dm:l" flag
> > +while getopts "vi:dm:lt:" flag
> > do
> > case "${flag}" in
> > v) verbose=1;;
> > @@ -92,6 +95,7 @@ do
> > i) ETH=${OPTARG};;
> > m) XSKTEST_MODE=${OPTARG};;
> > l) list=1;;
> > + t) XSKTEST_TEST=${OPTARG};;
> > esac
> > done
> >
> > @@ -170,6 +174,10 @@ if [ -n "$XSKTEST_MODE" ]; then
> > ARGS+="-m ${XSKTEST_MODE} "
> > fi
> >
> > +if [ -n "$XSKTEST_TEST" ]; then
> > + ARGS+="-t ${XSKTEST_TEST} "
> > +fi
> > +
> > retval=$?
> > test_status $retval "${TEST_NAME}"
> >
> > diff --git a/tools/testing/selftests/bpf/xskxceiver.c b/tools/testing/selftests/bpf/xskxceiver.c
> > index a063b9af7fff..6eca5f95a3e0 100644
> > --- a/tools/testing/selftests/bpf/xskxceiver.c
> > +++ b/tools/testing/selftests/bpf/xskxceiver.c
> > @@ -110,6 +110,7 @@ static const char *MAC2 = "\x00\x0A\x56\x9E\xEE\x61";
> > static bool opt_verbose;
> > static bool opt_print_tests;
> > static enum test_mode opt_mode = TEST_MODE_ALL;
> > +static u32 opt_run_test = RUN_ALL_TESTS;
> >
> > static void __exit_with_error(int error, const char *file, const char *func, int line)
> > {
> > @@ -316,10 +317,11 @@ static struct option long_options[] = {
> > {"verbose", no_argument, 0, 'v'},
> > {"mode", required_argument, 0, 'm'},
> > {"list", no_argument, 0, 'l'},
> > + {"test", required_argument, 0, 't'},
> > {0, 0, 0, 0}
> > };
> >
> > -static void usage(const char *prog)
> > +static void print_usage(char **argv)
> > {
> > const char *str =
> > " Usage: xskxceiver [OPTIONS]\n"
> > @@ -328,9 +330,11 @@ static void usage(const char *prog)
> > " -v, --verbose Verbose output\n"
> > " -b, --busy-poll Enable busy poll\n"
> > " -m, --mode Run only mode skb, drv, or zc\n"
> > - " -l, --list List all available tests\n";
> > + " -l, --list List all available tests\n"
> > + " -t, --test Run a specific test. Enter number from -l option.\n";
> >
> > - ksft_print_msg(str, prog);
> > + ksft_print_msg(str, basename(argv[0]));
> > + ksft_exit_xfail();
> > }
> >
> > static bool validate_interface(struct ifobject *ifobj)
> > @@ -350,7 +354,7 @@ static void parse_command_line(struct ifobject *ifobj_tx, struct ifobject *ifobj
> > opterr = 0;
> >
> > for (;;) {
> > - c = getopt_long(argc, argv, "i:vbm:l", long_options, &option_index);
> > + c = getopt_long(argc, argv, "i:vbm:lt:", long_options, &option_index);
> > if (c == -1)
> > break;
> >
> > @@ -390,16 +394,20 @@ static void parse_command_line(struct ifobject *ifobj_tx, struct ifobject *ifobj
> > strlen("zc")))) {
> > opt_mode = TEST_MODE_ZC;
> > } else {
> > - usage(basename(argv[0]));
> > - ksft_exit_xfail();
> > + print_usage(argv);
> > }
> > break;
> > case 'l':
> > opt_print_tests = true;
> > break;
> > + case 't':
> > + errno = 0;
> > + opt_run_test = strtol(optarg, NULL, 0);
> > + if (errno)
> > + print_usage(argv);
>
> aren't you missing ksft_exit_xfail(); here?
It is in print_usage() instead since all calls to print_usage() ends that way.
> > + break;
> > default:
> > - usage(basename(argv[0]));
> > - ksft_exit_xfail();
> > + print_usage(argv);
> > }
> > }
> > }
> > @@ -2330,8 +2338,8 @@ int main(int argc, char **argv)
> > struct pkt_stream *rx_pkt_stream_default;
> > struct pkt_stream *tx_pkt_stream_default;
> > struct ifobject *ifobj_tx, *ifobj_rx;
> > + u32 i, j, failed_tests = 0, nb_tests;
> > int modes = TEST_MODE_SKB + 1;
> > - u32 i, j, failed_tests = 0;
> > struct test_spec test;
> > bool shared_netdev;
> >
> > @@ -2353,15 +2361,17 @@ int main(int argc, char **argv)
> > print_tests();
> > ksft_exit_xpass();
> > }
> > + if (opt_run_test != RUN_ALL_TESTS && opt_run_test >= ARRAY_SIZE(tests)) {
> > + ksft_print_msg("Error: test %u does not exist.\n", opt_run_test);
> > + ksft_exit_xfail();
> > + }
> >
> > shared_netdev = (ifobj_tx->ifindex == ifobj_rx->ifindex);
> > ifobj_tx->shared_umem = shared_netdev;
> > ifobj_rx->shared_umem = shared_netdev;
> >
> > - if (!validate_interface(ifobj_tx) || !validate_interface(ifobj_rx)) {
> > - usage(basename(argv[0]));
> > - ksft_exit_xfail();
> > - }
> > + if (!validate_interface(ifobj_tx) || !validate_interface(ifobj_rx))
> > + print_usage(argv);
> >
> > if (is_xdp_supported(ifobj_tx->ifindex)) {
> > modes++;
> > @@ -2380,19 +2390,31 @@ int main(int argc, char **argv)
> > test.tx_pkt_stream_default = tx_pkt_stream_default;
> > test.rx_pkt_stream_default = rx_pkt_stream_default;
> >
> > + if (opt_run_test == RUN_ALL_TESTS)
> > + nb_tests = ARRAY_SIZE(tests);
> > + else
> > + nb_tests = 1;
> > if (opt_mode == TEST_MODE_ALL)
> > - ksft_set_plan(modes * ARRAY_SIZE(tests));
> > + ksft_set_plan(modes * nb_tests);
> > else
> > - ksft_set_plan(ARRAY_SIZE(tests));
> > + ksft_set_plan(nb_tests);
> >
> > for (i = 0; i < modes; i++) {
> > if (opt_mode != TEST_MODE_ALL && i != opt_mode)
> > continue;
> >
> > - for (j = 0; j < ARRAY_SIZE(tests); j++) {
> > - test_spec_init(&test, ifobj_tx, ifobj_rx, i, &tests[j]);
> > + if (opt_run_test == RUN_ALL_TESTS) {
> > + for (j = 0; j < ARRAY_SIZE(tests); j++) {
> > + test_spec_init(&test, ifobj_tx, ifobj_rx, i, &tests[j]);
> > + run_pkt_test(&test);
> > + usleep(USLEEP_MAX);
> > +
> > + if (test.fail)
> > + failed_tests++;
> > + }
> > + } else {
> > + test_spec_init(&test, ifobj_tx, ifobj_rx, i, &tests[opt_run_test]);
> > run_pkt_test(&test);
> > - usleep(USLEEP_MAX);
>
> Could we simplify this and avoid branching just for getting the index of
> test to run with something like:
>
> for (curr_test = opt_run_test; j = 0; j < nb_tests; j++, curr_test++) {
>
> branch vs additional variable, up to you but repeated code caught my eye
Would be nicer without repeated code for sure. I will try to simplify it.
> >
> > if (test.fail)
> > failed_tests++;
> > diff --git a/tools/testing/selftests/bpf/xskxceiver.h b/tools/testing/selftests/bpf/xskxceiver.h
> > index 3a71d490db3e..8015aeea839d 100644
> > --- a/tools/testing/selftests/bpf/xskxceiver.h
> > +++ b/tools/testing/selftests/bpf/xskxceiver.h
> > @@ -5,6 +5,8 @@
> > #ifndef XSKXCEIVER_H_
> > #define XSKXCEIVER_H_
> >
> > +#include <limits.h>
> > +
> > #include "xsk_xdp_progs.skel.h"
> >
> > #ifndef SOL_XDP
> > @@ -56,6 +58,7 @@
> > #define XSK_DESC__MAX_SKB_FRAGS 18
> > #define HUGEPAGE_SIZE (2 * 1024 * 1024)
> > #define PKT_DUMP_NB_TO_PRINT 16
> > +#define RUN_ALL_TESTS UINT_MAX
> >
> > #define print_verbose(x...) do { if (opt_verbose) ksft_print_msg(x); } while (0)
> >
> > --
> > 2.34.1
> >
