> On Thu, Aug 10, 2023 at 02:45:13PM +0800, Wei Fang wrote: > > The XDP_TX feature is not supported before, and all the frames which > > are deemed to do XDP_TX action actually do the XDP_DROP action. So > > this patch adds the XDP_TX support to FEC driver. > > > > I tested the performance of XDP_TX in XDP_DRV mode and XDP_SKB mode > > respectively on i.MX8MP-EVK platform, and as suggested by Jesper, I > > also tested the performance of XDP_REDIRECT on the same platform. And > > the test steps and results are as follows. > > > > XDP_TX test: > > Step 1: One board is used as generator and connects to switch,and the > > FEC port of DUT also connects to the switch. Both boards with flow > > control off. Then the generator runs the > > pktgen_sample03_burst_single_flow.sh script to generate and send burst > > traffic to DUT. Note that the size of packet was set to 64 bytes and > > the procotol of packet was UDP in my test scenario. In addtion, the > > SMAC of the packet need to be different from the MAC > > nit: addtion -> addition > > checkpatch.pl --codespell is your friend here. > Thanks for reminding.
