On Fri, Mar 10, 2023 at 3:09 AM Jiri Olsa <olsajiri@xxxxxxxxx> wrote:
>
> On Wed, Mar 08, 2023 at 06:13:34PM -0800, Ian Rogers wrote:
> > On Thu, Jan 19, 2023 at 1:13 PM Jiri Olsa <olsajiri@xxxxxxxxx> wrote:
> > >
> > > On Thu, Jan 19, 2023 at 02:41:12PM -0300, Arnaldo Carvalho de Melo wrote:
> > > > Em Thu, Jan 19, 2023 at 09:11:03AM -0800, Ian Rogers escreveu:
> > > > > On Sun, Jan 15, 2023 at 5:01 PM Ian Rogers <irogers@xxxxxxxxxx> wrote:
> > > > > > libbpf 1.0 was a major change in API. Perf has partially supported
> > > > > > older libbpf's but an implementation may be:
> > > > > > ..
> > > > > > pr_err("%s: not support, update libbpf\n", __func__);
> > > > > > return -ENOTSUP;
> > > > > > ..
> > > > > >
> > > > > > Rather than build a binary that would fail at runtime it is
> > > > > > preferrential just to build libbpf statically and link against
> > > > > > that. The static version is in the kernel tools tree and newer than
> > > > > > 1.0.
> > > > > >
> > > > > > These patches change the libbpf test to only pass when at least
> > > > > > version 1.0 is installed, then remove the conditional build and
> > > > > > feature logic.
> > > > > >
> > > > > > The issue is discussed here:
> > > > > > https://lore.kernel.org/lkml/20230106151320.619514-1-irogers@xxxxxxxxxx/
> > > > > > perf bpf:
> > > > > >
> > > > > > A variant of this fix was added to Linux 6.2 in:
> > > > > > "perf bpf: Avoid build breakage with libbpf < 0.8.0 + LIBBPF_DYNAMIC=1"
> > > > > > https://lore.kernel.org/lkml/Y71+eh00Ju7WeEFX@xxxxxxxxxx/
> > > > > > This change goes further in removing logic that is now no longer
> > > > > > necessary.
> > > > > >
> > > > > > v2. Rebase now that breakage fix patch is in linus/master.
> > > > >
> > > > > I missed the:
> > > > > Acked/Tested-by: Jiri Olsa <jolsa@xxxxxxxxxx>
> > > > > I believe we are waiting for package maintainer input.
> > > >
> > > > Yes, as fedora:37 still is at libbpf 0.8.0 :-\
> > >
> > > rawhide (f38) is already on 1.1.0 ... I'll check how bad it'd be to move
> > > f37 to 1.x, but I had to do bulk update of like 10 other dependent packages
> > > for f38, so not sure how bad it'd be for f37
> > >
> > > jirka
> >
> > +Guilherme
> >
> > We were looking for maintainer input on these changes, but there is no
> > update in over a month. Here is the original lore link:
> > https://lore.kernel.org/lkml/CAP-5=fVUgc8xtBzGi66YRUxZHyXvW2kiMjGz39dywaLxrO4Hpg@xxxxxxxxxxxxxx/
> > Should these changes land in perf-tools-next targeting Linux 6.4?
>
> ugh, I did not include Justin :-\ sry
>
> Justin,
> we are trying to move perf to use libbpf 1.0 only, which is fine for fedora 38,
> but fedora 37 is still on libbpf 0.8 (and it's not easy to do the bulk update)
>
> would fedora 37 even get to sync 6.4 kernel/kernel-tools?
Yes, Fedora 37 will not EOL until November when F39 has been out for
30 days. It will certainly get 6.4, which should come out this summer.
We could probably do some hackish static link situation for Fedora 37
if necessary though. It isn't idea, but we know it is short lived, so
I would be okay with making that work.
Justin
> thanks,
> jirka
>
> >
> > Thanks,
> > Ian
> >
> > > >
> > > > This is what I have in the containers I test, sure, the older ones
> > > > already have NO_LIBBPF=1 and some will get this added, and some I still
> > > > need to ask for libbpf-devel (or the distro specific name, like
> > > > libbpf-dev):
> > > >
> > > > [perfbuilder@five ~]$ podman images --format "{{.Repository}}:{{.Tag}}" | grep /acmel/ | grep -v '<none>' | sort -t: -Vk1,2 | grep -v -- -x- | while read image ; do echo -n $image: ; libbpf=$(podman run --rm -t --entrypoint=ls $image -la /usr/lib64/libbpf.so.1) ; echo $libbpf ; done
> > > > localhost/acmel/linux-perf-tools-build-almalinux:8:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-almalinux:9:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-alpine:3.12:ls: /usr/lib64/libbpf.so.1: No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-alpine:3.13:ls: /usr/lib64/libbpf.so.1: No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-alpine:3.14:ls: /usr/lib64/libbpf.so.1: No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-alpine:3.15:ls: /usr/lib64/libbpf.so.1: No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-alpine:3.16:ls: /usr/lib64/libbpf.so.1: No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-alpine:3.17:ls: /usr/lib64/libbpf.so.1: No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-alpine:edge:ls: /usr/lib64/libbpf.so.1: No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-alt:p9:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-alt:p10:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-alt:sisyphus:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-amazonlinux:2:ls: cannot access /usr/lib64/libbpf.so.1: No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-amazonlinux:devel:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-archlinux:base:lrwxrwxrwx 1 root root 15 Oct 1 12:32 /usr/lib64/libbpf.so.1 -> libbpf.so.1.0.1
> > > > localhost/acmel/linux-perf-tools-build-centos:8:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-centos:stream:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-clearlinux:latest:lrwxrwxrwx 1 root root 15 Sep 30 16:01 /usr/lib64/libbpf.so.1 -> libbpf.so.1.0.1
> > > > localhost/acmel/linux-perf-tools-build-debian:10:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-debian:11:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-debian:experimental:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-fedora:26:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-fedora:27:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-fedora:28:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-fedora:29:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-fedora:30:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-fedora:31:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-fedora:32:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-fedora:33:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-fedora:34:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-fedora:35:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-fedora:36:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-fedora:37:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-fedora:38:lrwxrwxrwx. 1 root root 15 Dec 20 14:39 /usr/lib64/libbpf.so.1 -> libbpf.so.1.0.0
> > > > localhost/acmel/linux-perf-tools-build-fedora:rawhide:lrwxrwxrwx. 1 root root 15 Dec 20 14:39 /usr/lib64/libbpf.so.1 -> libbpf.so.1.0.0
> > > > localhost/acmel/linux-perf-tools-build-gentoo-stage3:latest:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-manjaro:base:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-opensuse:15.0:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-opensuse:15.1:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-opensuse:15.2:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-opensuse:15.3:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-opensuse:15.4:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-opensuse:15.5:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-opensuse:tumbleweed:lrwxrwxrwx. 1 root root 15 Nov 9 12:08 /usr/lib64/libbpf.so.1 -> libbpf.so.1.0.1
> > > > localhost/acmel/linux-perf-tools-build-oraclelinux:8:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-oraclelinux:9:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-rockylinux:8:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-rockylinux:9:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-ubuntu:18.04:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-ubuntu:20.04:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-ubuntu:21.04:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-ubuntu:21.10:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-ubuntu:22.04:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-ubuntu:22.10:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > localhost/acmel/linux-perf-tools-build-ubuntu:23.04:ls: cannot access '/usr/lib64/libbpf.so.1': No such file or directory
> > > > [perfbuilder@five ~]$
> > > >
> > > > [perfbuilder@five linux-perf-tools-build]$ grep libbpf-dev */*/Dockerfile
> > > > debian/experimental/Dockerfile: libbpf-dev \
> > > > fedora/35/Dockerfile: libtraceevent-devel libbpf-devel \
> > > > fedora/36/Dockerfile: libtraceevent-devel libbpf-devel \
> > > > fedora/37/Dockerfile: libtraceevent-devel libbpf-devel \
> > > > fedora/38/Dockerfile: libtraceevent-devel libbpf-devel \
> > > > fedora/rawhide/Dockerfile: libtraceevent-devel libbpf-devel \
> > > > opensuse/tumbleweed/Dockerfile: libbpf-devel libtraceevent-devel \
> > > > ubuntu/22.04/Dockerfile: libelf-dev libiberty-dev libdw-dev libaudit-dev libtraceevent-dev libbpf-dev \
> > > > ubuntu/22.10/Dockerfile: libelf-dev libiberty-dev libdw-dev libaudit-dev libtraceevent-dev libbpf-dev \
> > > > ubuntu/23.04/Dockerfile: libelf-dev libiberty-dev libdw-dev libaudit-dev libtraceevent-dev libbpf-dev \
> > > > [perfbuilder@five linux-perf-tools-build]$
> > > >
> > > > In some cases it gets dragged on differently, like with clearlinux,
> > > > gentoo, archlinux, etc.
> > > >
> > > > Anyway, just a data point, I'll check if I'm missing installing it
> > > > somewhere.
> > > >
> > > > - Arnaldo
>
