Re: [PATCH RFC v2 bpf-next 7/9] selftests/bpf: Replace extract_build_id with read_build_id

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Feb 28, 2023 at 1:33 AM Jiri Olsa <jolsa@xxxxxxxxxx> wrote:
>
> Replacing extract_build_id with read_build_id that parses out
> build id directly from elf without using readelf tool.
>
> Signed-off-by: Jiri Olsa <jolsa@xxxxxxxxxx>
> ---

small nit below, but looks good. Thanks for clean up!

Acked-by: Andrii Nakryiko <andrii@xxxxxxxxxx>

>  .../bpf/prog_tests/stacktrace_build_id.c      | 19 ++++++--------
>  .../bpf/prog_tests/stacktrace_build_id_nmi.c  | 17 +++++--------
>  tools/testing/selftests/bpf/test_progs.c      | 25 -------------------
>  tools/testing/selftests/bpf/test_progs.h      |  1 -
>  4 files changed, 13 insertions(+), 49 deletions(-)
>
> diff --git a/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id.c b/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id.c
> index 9ad09a6c538a..9e4b76ee356f 100644
> --- a/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id.c
> +++ b/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id.c
> @@ -7,13 +7,12 @@ void test_stacktrace_build_id(void)
>
>         int control_map_fd, stackid_hmap_fd, stackmap_fd, stack_amap_fd;
>         struct test_stacktrace_build_id *skel;
> -       int err, stack_trace_len;
> +       int err, stack_trace_len, build_id_size;
>         __u32 key, prev_key, val, duration = 0;
> -       char buf[256];
> -       int i, j;
> +       char buf[BPF_BUILD_ID_SIZE];
>         struct bpf_stack_build_id id_offs[PERF_MAX_STACK_DEPTH];
>         int build_id_matches = 0;
> -       int retry = 1;
> +       int i, retry = 1;
>
>  retry:
>         skel = test_stacktrace_build_id__open_and_load();
> @@ -52,9 +51,10 @@ void test_stacktrace_build_id(void)
>                   "err %d errno %d\n", err, errno))
>                 goto cleanup;
>
> -       err = extract_build_id(buf, 256);
> +       build_id_size = read_build_id("./urandom_read", buf);

nit: "urandom_read" vs "./urandom_read" matters only when executing
binary, not when opening a file. So all these "./" just creates
unnecessary confusion, IMO

> +       err = build_id_size < 0 ? build_id_size : 0;
>
> -       if (CHECK(err, "get build_id with readelf",
> +       if (CHECK(err, "read_build_id",
>                   "err %d errno %d\n", err, errno))
>                 goto cleanup;
>
> @@ -64,8 +64,6 @@ void test_stacktrace_build_id(void)
>                 goto cleanup;
>
>         do {
> -               char build_id[64];
> -
>                 err = bpf_map_lookup_elem(stackmap_fd, &key, id_offs);
>                 if (CHECK(err, "lookup_elem from stackmap",
>                           "err %d, errno %d\n", err, errno))
> @@ -73,10 +71,7 @@ void test_stacktrace_build_id(void)
>                 for (i = 0; i < PERF_MAX_STACK_DEPTH; ++i)
>                         if (id_offs[i].status == BPF_STACK_BUILD_ID_VALID &&
>                             id_offs[i].offset != 0) {
> -                               for (j = 0; j < 20; ++j)
> -                                       sprintf(build_id + 2 * j, "%02x",
> -                                               id_offs[i].build_id[j] & 0xff);
> -                               if (strstr(buf, build_id) != NULL)
> +                               if (memcmp(buf, id_offs[i].build_id, build_id_size) == 0)
>                                         build_id_matches = 1;
>                         }
>                 prev_key = key;
> diff --git a/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c b/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c
> index f4ea1a215ce4..8d84149ebcc7 100644
> --- a/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c
> +++ b/tools/testing/selftests/bpf/prog_tests/stacktrace_build_id_nmi.c
> @@ -28,11 +28,10 @@ void test_stacktrace_build_id_nmi(void)
>                 .config = PERF_COUNT_HW_CPU_CYCLES,
>         };
>         __u32 key, prev_key, val, duration = 0;
> -       char buf[256];
> -       int i, j;
> +       char buf[BPF_BUILD_ID_SIZE];
>         struct bpf_stack_build_id id_offs[PERF_MAX_STACK_DEPTH];
> -       int build_id_matches = 0;
> -       int retry = 1;
> +       int build_id_matches = 0, build_id_size;
> +       int i, retry = 1;
>
>         attr.sample_freq = read_perf_max_sample_freq();
>
> @@ -94,7 +93,8 @@ void test_stacktrace_build_id_nmi(void)
>                   "err %d errno %d\n", err, errno))
>                 goto cleanup;
>
> -       err = extract_build_id(buf, 256);
> +       build_id_size = read_build_id("./urandom_read", buf);
> +       err = build_id_size < 0 ? build_id_size : 0;
>
>         if (CHECK(err, "get build_id with readelf",
>                   "err %d errno %d\n", err, errno))
> @@ -106,8 +106,6 @@ void test_stacktrace_build_id_nmi(void)
>                 goto cleanup;
>
>         do {
> -               char build_id[64];
> -
>                 err = bpf_map__lookup_elem(skel->maps.stackmap, &key, sizeof(key),
>                                            id_offs, sizeof(id_offs), 0);
>                 if (CHECK(err, "lookup_elem from stackmap",
> @@ -116,10 +114,7 @@ void test_stacktrace_build_id_nmi(void)
>                 for (i = 0; i < PERF_MAX_STACK_DEPTH; ++i)
>                         if (id_offs[i].status == BPF_STACK_BUILD_ID_VALID &&
>                             id_offs[i].offset != 0) {
> -                               for (j = 0; j < 20; ++j)
> -                                       sprintf(build_id + 2 * j, "%02x",
> -                                               id_offs[i].build_id[j] & 0xff);
> -                               if (strstr(buf, build_id) != NULL)
> +                               if (memcmp(buf, id_offs[i].build_id, build_id_size) == 0)
>                                         build_id_matches = 1;
>                         }
>                 prev_key = key;
> diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
> index 6d5e3022c75f..9813d53c4878 100644
> --- a/tools/testing/selftests/bpf/test_progs.c
> +++ b/tools/testing/selftests/bpf/test_progs.c
> @@ -591,31 +591,6 @@ int compare_stack_ips(int smap_fd, int amap_fd, int stack_trace_len)
>         return err;
>  }
>
> -int extract_build_id(char *build_id, size_t size)
> -{
> -       FILE *fp;
> -       char *line = NULL;
> -       size_t len = 0;
> -
> -       fp = popen("readelf -n ./urandom_read | grep 'Build ID'", "r");
> -       if (fp == NULL)
> -               return -1;
> -
> -       if (getline(&line, &len, fp) == -1)
> -               goto err;
> -       pclose(fp);
> -
> -       if (len > size)
> -               len = size;
> -       memcpy(build_id, line, len);
> -       build_id[len] = '\0';
> -       free(line);
> -       return 0;
> -err:
> -       pclose(fp);
> -       return -1;
> -}
> -
>  static int finit_module(int fd, const char *param_values, int flags)
>  {
>         return syscall(__NR_finit_module, fd, param_values, flags);
> diff --git a/tools/testing/selftests/bpf/test_progs.h b/tools/testing/selftests/bpf/test_progs.h
> index 9fbdc57c5b57..3825c2797a4b 100644
> --- a/tools/testing/selftests/bpf/test_progs.h
> +++ b/tools/testing/selftests/bpf/test_progs.h
> @@ -404,7 +404,6 @@ static inline void *u64_to_ptr(__u64 ptr)
>  int bpf_find_map(const char *test, struct bpf_object *obj, const char *name);
>  int compare_map_keys(int map1_fd, int map2_fd);
>  int compare_stack_ips(int smap_fd, int amap_fd, int stack_trace_len);
> -int extract_build_id(char *build_id, size_t size);
>  int kern_sync_rcu(void);
>  int trigger_module_test_read(int read_sz);
>  int trigger_module_test_write(int write_sz);
> --
> 2.39.2
>




[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux