From: Jason Xing <kernelxing@xxxxxxxxxxx>
Include the second VLAN HLEN into account when computing the maximum
MTU size as other drivers do.
Fixes: fabf1bce103a ("ixgbe: Prevent unsupported configurations with XDP")
Signed-off-by: Jason Xing <kernelxing@xxxxxxxxxxx>
Reviewed-by: Alexander Duyck <alexanderduyck@xxxxxx>
Tested-by: Chandan Kumar Rout <chandanx.rout@xxxxxxxxx> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@xxxxxxxxx>
---
drivers/net/ethernet/intel/ixgbe/ixgbe.h | 2 ++
drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 3 +--
2 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
index bc68b8f2176d..8736ca4b2628 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h
@@ -73,6 +73,8 @@
#define IXGBE_RXBUFFER_4K 4096
#define IXGBE_MAX_RXBUFFER 16384 /* largest size for a single descriptor */
+#define IXGBE_PKT_HDR_PAD (ETH_HLEN + ETH_FCS_LEN + (VLAN_HLEN * 2))
+
/* Attempt to maximize the headroom available for incoming frames. We
* use a 2K buffer for receives and need 1536/1534 to store the data for
* the frame. This leaves us with 512 bytes of room. From that we need
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index 25ca329f7d3c..4507fba8747a 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -6801,8 +6801,7 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
struct ixgbe_adapter *adapter = netdev_priv(netdev);
if (ixgbe_enabled_xdp_adapter(adapter)) {
- int new_frame_size = new_mtu + ETH_HLEN + ETH_FCS_LEN +
- VLAN_HLEN;
+ int new_frame_size = new_mtu + IXGBE_PKT_HDR_PAD;
if (new_frame_size > ixgbe_max_xdp_frame_size(adapter)) {
e_warn(probe, "Requested MTU size is not supported with XDP\n");
--
2.38.1
