Re: [PATCH v4 2/2] tools/resolve_btfids: Alter how HOSTCC is forced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 31, 2023 at 02:17:08PM -0700, Nathan Chancellor wrote:
> On Tue, Jan 31, 2023 at 12:59:04PM -0800, Ian Rogers wrote:
> > On Tue, Jan 31, 2023 at 11:33 AM Nathan Chancellor <nathan@xxxxxxxxxx> wrote:
> > >
> > > On Tue, Jan 31, 2023 at 11:25:38AM -0800, Ian Rogers wrote:
> > > > On Tue, Jan 31, 2023 at 10:08 AM Ian Rogers <irogers@xxxxxxxxxx> wrote:
> > > > >
> > > > > On Tue, Jan 31, 2023 at 9:21 AM Nathan Chancellor <nathan@xxxxxxxxxx> wrote:
> > > > > >
> > > > > > Hi Ian,
> > > > > >
> > > > > > On Mon, Jan 23, 2023 at 10:43:24PM -0800, Ian Rogers wrote:
> > > > > > > HOSTCC is always wanted when building. Setting CC to HOSTCC happens
> > > > > > > after tools/scripts/Makefile.include is included, meaning flags are
> > > > > > > set assuming say CC is gcc, but then it can be later set to HOSTCC
> > > > > > > which may be clang. tools/scripts/Makefile.include is needed for host
> > > > > > > set up and common macros in objtool's Makefile. Rather than override
> > > > > > > CC to HOSTCC, just pass CC as HOSTCC to Makefile.build, the libsubcmd
> > > > > > > builds and the linkage step. This means the Makefiles don't see things
> > > > > > > like CC changing and tool flag determination, and similar, work
> > > > > > > properly.
> > > > > > >
> > > > > > > Also, clear the passed subdir as otherwise an outer build may break by
> > > > > > > inadvertently passing an inappropriate value.
> > > > > > >
> > > > > > > Signed-off-by: Ian Rogers <irogers@xxxxxxxxxx>
> > > > > > > ---
> > > > > > >  tools/bpf/resolve_btfids/Makefile | 17 +++++++----------
> > > > > > >  1 file changed, 7 insertions(+), 10 deletions(-)
> > > > > > >
> > > > > > > diff --git a/tools/bpf/resolve_btfids/Makefile b/tools/bpf/resolve_btfids/Makefile
> > > > > > > index 1fe0082b2ecc..daed388aa5d7 100644
> > > > > > > --- a/tools/bpf/resolve_btfids/Makefile
> > > > > > > +++ b/tools/bpf/resolve_btfids/Makefile
> > > > > > > @@ -18,14 +18,11 @@ else
> > > > > > >  endif
> > > > > > >
> > > > > > >  # always use the host compiler
> > > > > > > -AR       = $(HOSTAR)
> > > > > > > -CC       = $(HOSTCC)
> > > > > > > -LD       = $(HOSTLD)
> > > > > > > -ARCH     = $(HOSTARCH)
> > > > > > > +HOST_OVERRIDES := AR="$(HOSTAR)" CC="$(HOSTCC)" LD="$(HOSTLD)" ARCH="$(HOSTARCH)" \
> > > > > > > +               EXTRA_CFLAGS="$(HOSTCFLAGS) $(KBUILD_HOSTCFLAGS)"
> > > > > > > +
> > > > > > >  RM      ?= rm
> > > > > > >  CROSS_COMPILE =
> > > > > > > -CFLAGS  := $(KBUILD_HOSTCFLAGS)
> > > > > > > -LDFLAGS := $(KBUILD_HOSTLDFLAGS)
> > > > > > >
> > > > > > >  OUTPUT ?= $(srctree)/tools/bpf/resolve_btfids/
> > > > > > >
> > > > > > > @@ -56,12 +53,12 @@ $(OUTPUT) $(OUTPUT)/libsubcmd $(LIBBPF_OUT):
> > > > > > >
> > > > > > >  $(SUBCMDOBJ): fixdep FORCE | $(OUTPUT)/libsubcmd
> > > > > > >       $(Q)$(MAKE) -C $(SUBCMD_SRC) OUTPUT=$(SUBCMD_OUT) \
> > > > > > > -                 DESTDIR=$(SUBCMD_DESTDIR) prefix= \
> > > > > > > +                 DESTDIR=$(SUBCMD_DESTDIR) $(HOST_OVERRIDES) prefix= subdir= \
> > > > > > >                   $(abspath $@) install_headers
> > > > > > >
> > > > > > >  $(BPFOBJ): $(wildcard $(LIBBPF_SRC)/*.[ch] $(LIBBPF_SRC)/Makefile) | $(LIBBPF_OUT)
> > > > > > >       $(Q)$(MAKE) $(submake_extras) -C $(LIBBPF_SRC) OUTPUT=$(LIBBPF_OUT)    \
> > > > > > > -                 DESTDIR=$(LIBBPF_DESTDIR) prefix= EXTRA_CFLAGS="$(CFLAGS)" \
> > > > > > > +                 DESTDIR=$(LIBBPF_DESTDIR) $(HOST_OVERRIDES) prefix= subdir= \
> > > > > > >                   $(abspath $@) install_headers
> > > > > > >
> > > > > > >  LIBELF_FLAGS := $(shell $(HOSTPKG_CONFIG) libelf --cflags 2>/dev/null)
> > > > > > > @@ -80,11 +77,11 @@ export srctree OUTPUT CFLAGS Q
> > > > > > >  include $(srctree)/tools/build/Makefile.include
> > > > > > >
> > > > > > >  $(BINARY_IN): fixdep FORCE prepare | $(OUTPUT)
> > > > > > > -     $(Q)$(MAKE) $(build)=resolve_btfids
> > > > > > > +     $(Q)$(MAKE) $(build)=resolve_btfids $(HOST_OVERRIDES)
> > > > > > >
> > > > > > >  $(BINARY): $(BPFOBJ) $(SUBCMDOBJ) $(BINARY_IN)
> > > > > > >       $(call msg,LINK,$@)
> > > > > > > -     $(Q)$(CC) $(BINARY_IN) $(LDFLAGS) -o $@ $(BPFOBJ) $(SUBCMDOBJ) $(LIBS)
> > > > > > > +     $(Q)$(HOSTCC) $(BINARY_IN) $(KBUILD_HOSTLDFLAGS) -o $@ $(BPFOBJ) $(SUBCMDOBJ) $(LIBS)
> > > > > > >
> > > > > > >  clean_objects := $(wildcard $(OUTPUT)/*.o                \
> > > > > > >                              $(OUTPUT)/.*.o.cmd           \
> > > > > > > --
> > > > > > > 2.39.0.246.g2a6d74b583-goog
> > > > > > >
> > > > > >
> > > > > > I just bisected a linking failure when building resolve_btfids with
> > > > > > clang to this change as commit 13e07691a16f ("tools/resolve_btfids:
> > > > > > Alter how HOSTCC is forced") in the bpf-next tree.
> > > > > >
> > > > > > It appears to be related to whether or not CROSS_COMPILE is specified,
> > > > > > which we have to do for certain architectures and configurations still.
> > > > > > arm64 is not one of those but it helps demonstrate the issue.
> > > > > >
> > > > > >   # Turn off CONFIG_DEBUG_INFO_REDUCED and turn on CONFIG_DEBUG_INFO_BTF
> > > > > >   $ make -skj"$(nproc)" ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- HOSTLDFLAGS=-fuse-ld=lld LLVM=1 defconfig menuconfig
> > > > > >
> > > > > >   $ make -skj"$(nproc)" ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- HOSTLDFLAGS=-fuse-ld=lld LLVM=1 prepare
> > > > > >   ld.lld: error: $LINUX_SRC/tools/bpf/resolve_btfids//resolve_btfids-in.o is incompatible with elf64-x86-64
> > > > > >   clang-17: error: linker command failed with exit code 1 (use -v to see invocation)
> > > > > >   ...
> > > > > >
> > > > > > Before your change, with V=1, I see:
> > > > > >
> > > > > > clang -Wp,-MD,$LINUX_SRC/tools/bpf/resolve_btfids/.main.o.d -Wp,-MT,$LINUX_SRC/tools/bpf/resolve_btfids/main.o -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu11 -Wdeclaration-after-statement -g -I$LINUX_SRC/tools/include -I$LINUX_SRC/tools/include/uapi -I$LINUX_SRC/tools/bpf/resolve_btfids/libbpf/include -I$LINUX_SRC/tools/bpf/resolve_btfids/libsubcmd/include -D"BUILD_STR(s)=#s" -c -o $LINUX_SRC/tools/bpf/resolve_btfids/main.o main.c
> > > > > >
> > > > > > After, I see:
> > > > > >
> > > > > > clang -Wp,-MD,$LINUX_SRC/tools/bpf/resolve_btfids/.main.o.d -Wp,-MT,$LINUX_SRC/tools/bpf/resolve_btfids/main.o --target=aarch64-linux-gnu -g -I$LINUX_SRC/tools/include -I$LINUX_SRC/tools/include/uapi -I$LINUX_SRC/tools/bpf/resolve_btfids/libbpf/include -I$LINUX_SRC/tools/bpf/resolve_btfids/libsubcmd/include -D"BUILD_STR(s)=#s" -c -o $LINUX_SRC/tools/bpf/resolve_btfids/main.o main.c
> > > > > >
> > > > > > We seem to have taken on a '--target=aarch64-linux-gnu' (changing the
> > > > > > target of resolve_btfids-in.o) and we dropped the warning flags.
> > > > > >
> > > > > > I think this comes from the clang block in
> > > > > > tools/scripts/Makefile.include, which is included into the
> > > > > > resolve_btfids Makefile via tools/lib/bpf/Makefile.
> > > > > >
> > > > > > I am not super familiar with the tools build system, otherwise I would
> > > > > > try to provide a patch. I tried moving CROSS_COMPILE from a recursive to
> > > > > > simple variable ('=' -> ':=') and moving it to HOST_OVERRIDES but those
> > > > > > did not appear to resolve it for me.
> > > > > >
> > > > > > If there is any other information I can provide or patches I can test,
> > > > > > please let me know.
> > > > > >
> > > > > > Cheers,
> > > > > > Nathan
> > > > >
> > > > > Thanks Nathan, and thanks for all the details in the bug report. I'm
> > > > > looking into this.
> > > > >
> > > > > Ian
> > > >
> > > > Given the somewhat complicated cross compile I wasn't able to get a
> > > > reproduction. Could you see if the following addresses the problem:
> > >
> > > As long as you have an LLVM toolchain that targets AArch64 and your
> > > host, you should be able to reproduce this issue with those commands
> > > verbatim, as that command should not use any GNU binutils. I am pretty
> > > sure I tried it in a fresh container before reporting it but it is
> > > possible that I did not.
> > 
> > Thanks, do you have instructions on setting up the container?
> 
> Sure thing, this worked for me in the Linux source you would like to
> build (I marked it readonly to make sure any modifications were done in
> my host environment, remove the ':ro' if you would like to make edits to
> the source within the container). Docker should work as well but I did
> not test it.
> 
> $ podman run --rm -ti -v $PWD:/linux:ro docker.io/archlinux:base-devel
> # pacman -Syyu --noconfirm bc clang lib32-glibc lld llvm python
> ...
> 
> # To turn on CONFIG_DEBUG_INFO_BTF
> # make -C /linux -skj"$(nproc)" ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- HOSTLDFLAGS=-fuse-ld=lld LLVM=1 O=/build defconfig menuconfig
> 
> # make -C /linux -skj"$(nproc)" ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- HOSTLDFLAGS=-fuse-ld=lld LLVM=1 O=/build prepare
> ld.lld: error: /build/tools/bpf/resolve_btfids//resolve_btfids-in.o is incompatible with elf64-x86-64
> clang-15: error: linker command failed with exit code 1 (use -v to see invocation)
> 
> > > > ```
> > > > diff --git a/tools/bpf/resolve_btfids/Makefile
> > > > b/tools/bpf/resolve_btfids/Makefile
> > > > index daed388aa5d7..a06966841df4 100644
> > > > --- a/tools/bpf/resolv
> > 
> > Ian
> > e_btfids/Makefile
> > > > +++ b/tools/bpf/resolve_btfids/Makefile
> > > > @@ -19,10 +19,9 @@ endif
> > > >
> > > > # always use the host compiler
> > > > HOST_OVERRIDES := AR="$(HOSTAR)" CC="$(HOSTCC)" LD="$(HOSTLD)"
> > > > ARCH="$(HOSTARCH)" \
> > > > -                 EXTRA_CFLAGS="$(HOSTCFLAGS) $(KBUILD_HOSTCFLAGS)"
> > > > +                 EXTRA_CFLAGS="$(HOSTCFLAGS) $(KBUILD_HOSTCFLAGS)"
> > > > CROSS_COMPILE=""
> > > >
> > > > RM      ?= rm
> > > > -CROSS_COMPILE =
> > > >
> > > > OUTPUT ?= $(srctree)/tools/bpf/resolve_btfids/
> > > > ```
> > > >
> > >
> > > Unfortunately, it does not. I still see '--target=' end up in the
> > > CFLAGS of those files.

hi,
I can reproduce that and I think the reason is that the patch removes
CFLAGS setup

  CFLAGS  := $(KBUILD_HOSTCFLAGS)

so now the 'include ../../scripts/Makefile.include' will set CFLAGS
with the  --target=... and we fail

I can compile with the change below.. we could also set CROSS_COMPILE
before including tools/scripts/Makefile.include ... not sure which
on is better

also I need to check if we should keep LDFLAGS setup as well

jirka


---
diff --git a/tools/bpf/resolve_btfids/Makefile b/tools/bpf/resolve_btfids/Makefile
index daed388aa5d7..875e3fcce7cd 100644
--- a/tools/bpf/resolve_btfids/Makefile
+++ b/tools/bpf/resolve_btfids/Makefile
@@ -64,6 +64,7 @@ $(BPFOBJ): $(wildcard $(LIBBPF_SRC)/*.[ch] $(LIBBPF_SRC)/Makefile) | $(LIBBPF_OU
 LIBELF_FLAGS := $(shell $(HOSTPKG_CONFIG) libelf --cflags 2>/dev/null)
 LIBELF_LIBS  := $(shell $(HOSTPKG_CONFIG) libelf --libs 2>/dev/null || echo -lelf)
 
+CFLAGS := $(KBUILD_HOSTCFLAGS)
 CFLAGS += -g \
           -I$(srctree)/tools/include \
           -I$(srctree)/tools/include/uapi \




[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux