On Fri, Jan 27, 2023 at 11:08 PM Jason Xing <kerneljasonxing@xxxxxxxxx> wrote:
>
> On Fri, Jan 27, 2023 at 10:54 PM Jason Xing <kerneljasonxing@xxxxxxxxx> wrote:
> >
> > My bad. It's not that right. Please ignore the v2 patch. I need some
> > time to do more studies and tests on this part.
> >
>
> In the meantime, any suggestions and help are appreciated :) I'm still
> working on it.
>
Dear maintainers, after several tests I did during this time as much
as possible, I couldn't find anything wrong though I am not that
familiar with the whole ixgbe code. I decided to 'reopen' this patch
v2. Please help me review the current patch.
Thanks,
Jason
>
> > Thanks,
> > Jason
> >
> > On Fri, Jan 27, 2023 at 8:20 PM Jason Xing <kerneljasonxing@xxxxxxxxx> wrote:
> > >
> > > From: Jason Xing <kernelxing@xxxxxxxxxxx>
> > >
> > > I encountered one case where I cannot increase the MTU size directly
> > > from 1500 to 2000 with XDP enabled if the server is equipped with
> > > IXGBE card, which happened on thousands of servers in production
> > > environment.
> > >
> > > This patch follows the behavior of changing MTU as i40e/ice does.
> > >
> > > Referrences:
> > > commit 23b44513c3e6f ("ice: allow 3k MTU for XDP")
> > > commit 0c8493d90b6bb ("i40e: add XDP support for pass and drop actions")
> > >
> > > Link: https://lore.kernel.org/lkml/20230121085521.9566-1-kerneljasonxing@xxxxxxxxx/
> > > Signed-off-by: Jason Xing <kernelxing@xxxxxxxxxxx>
> > > ---
> > > v2:
> > > 1) change the commit message.
> > > 2) modify the logic when changing MTU size suggested by Maciej and Alexander.
> > > ---
> > > drivers/net/ethernet/intel/ixgbe/ixgbe_main.c | 25 ++++++++++++-------
> > > 1 file changed, 16 insertions(+), 9 deletions(-)
> > >
> > > diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> > > index ab8370c413f3..2c1b6eb60436 100644
> > > --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> > > +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
> > > @@ -6777,6 +6777,18 @@ static void ixgbe_free_all_rx_resources(struct ixgbe_adapter *adapter)
> > > ixgbe_free_rx_resources(adapter->rx_ring[i]);
> > > }
> > >
> > > +/**
> > > + * ixgbe_max_xdp_frame_size - returns the maximum allowed frame size for XDP
> > > + * @adapter - device handle, pointer to adapter
> > > + */
> > > +static int ixgbe_max_xdp_frame_size(struct ixgbe_adapter *adapter)
> > > +{
> > > + if (PAGE_SIZE >= 8192 || adapter->flags2 & IXGBE_FLAG2_RX_LEGACY)
> > > + return IXGBE_RXBUFFER_2K;
> > > + else
> > > + return IXGBE_RXBUFFER_3K;
> > > +}
> > > +
> > > /**
> > > * ixgbe_change_mtu - Change the Maximum Transfer Unit
> > > * @netdev: network interface device structure
> > > @@ -6788,18 +6800,13 @@ static int ixgbe_change_mtu(struct net_device *netdev, int new_mtu)
> > > {
> > > struct ixgbe_adapter *adapter = netdev_priv(netdev);
> > >
> > > - if (adapter->xdp_prog) {
> > > + if (ixgbe_enabled_xdp_adapter(adapter)) {
> > > int new_frame_size = new_mtu + ETH_HLEN + ETH_FCS_LEN +
> > > VLAN_HLEN;
> > > - int i;
> > > -
> > > - for (i = 0; i < adapter->num_rx_queues; i++) {
> > > - struct ixgbe_ring *ring = adapter->rx_ring[i];
> > >
> > > - if (new_frame_size > ixgbe_rx_bufsz(ring)) {
> > > - e_warn(probe, "Requested MTU size is not supported with XDP\n");
> > > - return -EINVAL;
> > > - }
> > > + if (new_frame_size > ixgbe_max_xdp_frame_size(adapter)) {
> > > + e_warn(probe, "Requested MTU size is not supported with XDP\n");
> > > + return -EINVAL;
> > > }
> > > }
> > >
> > > --
> > > 2.37.3
> > >
