> On 1/20/23 9:16 AM, Lorenzo Bianconi wrote:
> > +static __always_inline int xdp_process_echo_packet(struct xdp_md *xdp, bool dut)
> > +{
> > + void *data_end = (void *)(long)xdp->data_end;
> > + __be32 saddr = dut ? tester_ip : dut_ip;
> > + __be32 daddr = dut ? dut_ip : tester_ip;
> > + void *data = (void *)(long)xdp->data;
> > + struct ethhdr *eh = data;
> > + struct tlv_hdr *tlv;
> > + struct udphdr *uh;
> > + struct iphdr *ih;
> > + __be16 port;
> > + __u8 *cmd;
> > +
> > + if (eh + 1 > (struct ethhdr *)data_end)
> > + return -EINVAL;
> > +
> > + if (eh->h_proto != bpf_htons(ETH_P_IP))
> > + return -EINVAL;
>
> Both v6 and v4 support are needed as a tool.
ack, I will fix it.
>
> [ ... ]
>
> > diff --git a/tools/testing/selftests/bpf/test_xdp_features.sh b/tools/testing/selftests/bpf/test_xdp_features.sh
> > new file mode 100755
> > index 000000000000..98b8fd2b6c16
> > --- /dev/null
> > +++ b/tools/testing/selftests/bpf/test_xdp_features.sh
> > @@ -0,0 +1,99 @@
> > +#!/bin/bash
> > +# SPDX-License-Identifier: GPL-2.0
> > +
> > +# Create 2 namespaces with two veth peers, and
> > +# check reported and detected XDP capabilities
> > +#
> > +# NS0(v00) NS1(v11)
> > +# | |
> > +# | |
> > +# (v01, id:111) ------ (v10,id:222)
> > +
> > +readonly NS0="ns1-$(mktemp -u XXXXXX)"
> > +readonly NS1="ns2-$(mktemp -u XXXXXX)"
> > +ret=1
> > +
> > +setup() {
> > + {
> > + ip netns add ${NS0}
> > + ip netns add ${NS1}
> > +
> > + ip link add v01 index 111 type veth peer name v00 netns ${NS0}
> > + ip link add v10 index 222 type veth peer name v11 netns ${NS1}
> > +
> > + ip link set v01 up
> > + ip addr add 10.10.0.1/24 dev v01
> > + ip link set v01 address 00:11:22:33:44:55
> > + ip -n ${NS0} link set dev v00 up
> > + ip -n ${NS0} addr add 10.10.0.11/24 dev v00
> > + ip -n ${NS0} route add default via 10.10.0.1
> > + ip -n ${NS0} link set v00 address 00:12:22:33:44:55
> > +
> > + ip link set v10 up
> > + ip addr add 10.10.1.1/24 dev v10
> > + ip link set v10 address 00:13:22:33:44:55
> > + ip -n ${NS1} link set dev v11 up
> > + ip -n ${NS1} addr add 10.10.1.11/24 dev v11
> > + ip -n ${NS1} route add default via 10.10.1.1
> > + ip -n ${NS1} link set v11 address 00:14:22:33:44:55
> > +
> > + sysctl -w net.ipv4.ip_forward=1
> > + # Enable XDP mode
> > + ethtool -K v01 gro on
> > + ethtool -K v01 tx-checksumming off
> > + ip netns exec ${NS0} ethtool -K v00 gro on
> > + ip netns exec ${NS0} ethtool -K v00 tx-checksumming off
> > + ethtool -K v10 gro on
> > + ethtool -K v10 tx-checksumming off
> > + ip netns exec ${NS1} ethtool -K v11 gro on
> > + ip netns exec ${NS1} ethtool -K v11 tx-checksumming off
> > + } > /dev/null 2>&1
> > +}
> > +
> > +cleanup() {
> > + ip link del v01 2> /dev/null
> > + ip link del v10 2> /dev/null
> > + ip netns del ${NS0} 2> /dev/null
> > + ip netns del ${NS1} 2> /dev/null
> > + [ "$(pidof xdp_features)" = "" ] || kill $(pidof xdp_features) 2> /dev/null
> > +}
> > +
> > +test_xdp_features() {
> > + setup
> > +
> > + ## XDP_PASS
> > + ip netns exec ${NS1} ./xdp_features -f XDP_PASS -D 10.10.1.11 -T 10.10.0.11 v11 &
> > + ip netns exec ${NS0} ./xdp_features -t -f XDP_PASS -D 10.10.1.11 -C 10.10.1.11 -T 10.10.0.11 v00
> > +
> > + [ $? -ne 0 ] && exit
> > +
> > + # XDP_DROP
> > + ip netns exec ${NS1} ./xdp_features -f XDP_DROP -D 10.10.1.11 -T 10.10.0.11 v11 &
> > + ip netns exec ${NS0} ./xdp_features -t -f XDP_DROP -D 10.10.1.11 -C 10.10.1.11 -T 10.10.0.11 v00
> > +
> > + [ $? -ne 0 ] && exit
> > +
> > + ## XDP_TX
> > + ./xdp_features -f XDP_TX -D 10.10.0.1 -T 10.10.0.11 v01 &
> > + ip netns exec ${NS0} ./xdp_features -t -f XDP_TX -D 10.10.0.1 -C 10.10.0.1 -T 10.10.0.11 v00
> > +
> > + ## XDP_REDIRECT
> > + ip netns exec ${NS1} ./xdp_features -f XDP_REDIRECT -D 10.10.1.11 -T 10.10.0.11 v11 &
> > + ip netns exec ${NS0} ./xdp_features -t -f XDP_REDIRECT -D 10.10.1.11 -C 10.10.1.11 -T 10.10.0.11 v00
> > +
> > + [ $? -ne 0 ] && exit
> > +
> > + ## XDP_NDO_XMIT
> > + ./xdp_features -f XDP_NDO_XMIT -D 10.10.0.1 -T 10.10.0.11 v01 &
> > + ip netns exec ${NS0} ./xdp_features -t -f XDP_NDO_XMIT -D 10.10.0.1 -C 10.10.0.1 -T 10.10.0.11 v00
> > +
> > + ret=$?
> > + cleanup
> > +}
> > +
> > +set -e
> > +trap cleanup 2 3 6 9
> > +
> > +test_xdp_features
>
> This won't be run by bpf CI.
>
> A selftest in test_progs is needed to test the libbpf changes in patch 6.
ack, I will add it.
Regards,
Lorenzo
>
Attachment:
signature.asc
Description: PGP signature
