Re: [PATCH bpf-next 2/8] bpf: Allow trusted args to walk struct when checking BTF IDs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jan 19, 2023 at 10:14:41PM -0800, Alexei Starovoitov wrote:
> On Fri, Jan 20, 2023 at 11:26:37AM +0530, Kumar Kartikeya Dwivedi wrote:
> > On Fri, 20 Jan 2023 at 11:10, Alexei Starovoitov
> > <alexei.starovoitov@xxxxxxxxx> wrote:
> > >
> > > On Thu, Jan 19, 2023 at 11:23:18PM -0600, David Vernet wrote:
> > > > On Fri, Jan 20, 2023 at 10:28:15AM +0530, Kumar Kartikeya Dwivedi wrote:
> > > > > On Fri, Jan 20, 2023 at 05:28:27AM IST, David Vernet wrote:
> > > > > > When validating BTF types for KF_TRUSTED_ARGS kfuncs, the verifier
> > > > > > currently enforces that the top-level type must match when calling
> > > > > > the kfunc. In other words, the verifier does not allow the BPF program
> > > > > > to pass a bitwise equivalent struct, despite it being functionally safe.
> > > > > > For example, if you have the following type:
> > > > > >
> > > > > > struct  nf_conn___init {
> > > > > >   struct nf_conn ct;
> > > > > > };
> > > > > >
> > > > > > It would be safe to pass a struct nf_conn___init to a kfunc expecting a
> > > > > > struct nf_conn.
> > > > >
> > > > > Just running bpf_nf selftest would have shown this is false.
> > > >
> > > > And I feel silly, because I did run them, and could have sworn they
> > > > passed...looking now at the change_status_after_alloc testcase I see
> > > > you're of course correct. Very poor example, thank you for pointing it
> > > > out.
> > > >
> > > > >
> > > > > > Being able to do this will be useful for certain types
> > > > > > of kfunc / kptrs enabled by BPF. For example, in a follow-on patch, a
> > > > > > series of kfuncs will be added which allow programs to do bitwise
> > > > > > queries on cpumasks that are either allocated by the program (in which
> > > > > > case they'll be a 'struct bpf_cpumask' type that wraps a cpumask_t as
> > > > > > its first element), or a cpumask that was allocated by the main kernel
> > > > > > (in which case it will just be a straight cpumask_t, as in
> > > > > >  task->cpus_ptr).
> > > > > >
> > > > > > Having the two types of cpumasks allows us to distinguish between the
> > > > > > two for when a cpumask is read-only vs. mutatable. A struct bpf_cpumask
> > > > > > can be mutated by e.g. bpf_cpumask_clear(), whereas a regular cpumask_t
> > > > > > cannot be. On the other hand, a struct bpf_cpumask can of course be
> > > > > > queried in the exact same manner as a cpumask_t, with e.g.
> > > > > > bpf_cpumask_test_cpu().
> > > > > >
> > > > > > If we were to enforce that top level types match, then a user that's
> > > > > > passing a struct bpf_cpumask to a read-only cpumask_t argument would
> > > > > > have to cast with something like bpf_cast_to_kern_ctx() (which itself
> > > > > > would need to be updated to expect the alias, and currently it only
> > > > > > accommodates a single alias per prog type). Additionally, not specifying
> > > > > > KF_TRUSTED_ARGS is not an option, as some kfuncs take one argument as a
> > > > > > struct bpf_cpumask *, and another as a struct cpumask *
> > > > > > (i.e. cpumask_t).
> > > > > >
> > > > > > In order to enable this, this patch relaxes the constraint that a
> > > > > > KF_TRUSTED_ARGS kfunc must have strict type matching. In order to
> > > > > > try and be conservative and match existing behavior / expectations, this
> > > > > > patch also enforces strict type checking for acquire kfuncs. We were
> > > > > > already enforcing it for release kfuncs, so this should also improve the
> > > > > > consistency of the semantics for kfuncs.
> > > > > >
> > > > >
> > > > > What you want is to simply follow type at off = 0 (but still enforce the off = 0
> > > > > requirement). This is something which is currently done for bpf_sk_release (for
> > > > > struct sk_common) in check_reg_type, but it is not safe in general to just open
> > > > > this up for all cases. I suggest encoding this particular requirement in the
> > > > > argument, and simply using triple underscore variant of the type for the special
> > > > > 'read_only' requirement. This will allow you to use same type in your BPF C
> > > > > program, while allowing verifier to see them as two different types in kfunc
> > > > > parameters. Then just relax type following for the particular argument so that
> > > > > one can pass cpumask_t___ro to kfunc expecting cpumask_t (but only at off = 0,
> > > > > it just visits first member after failing match on top level type). off = 0
> > > > > check is still necessary.
> > > >
> > > > Sigh, yeah, another ___ workaround but I agree it's probably the best we
> > > > can do for now, and in general seems pretty useful. Obviously preferable
> > > > to this patch which just doesn't work. Alexei, are you OK with this? If
> > > > so, I'll take this approach for v2.
> > >
> > > We decided to rely on strict type match when we introduced 'struct nf_conn___init',
> > > but with that we twisted the C standard to, what looks to be, a wrong direction.
> > >
> > > For definition:
> > > struct nf_conn___init {
> > >    struct nf_conn ct;
> > > };
> > > if a kfunc accepts a pointer to nf_conn it should always accept a pointer to nf_conn__init
> > > for both read and write, because in C that's valid and safe type cast.
> > >
> > 
> > The intention of this nf_conn___init was to be invisible to the user.
> > In selftests there is no trace of nf_conn___init. It is only for
> > enforcing semantics by virtue of type safety in the verifier.
> > 
> > Allocated but not inserted nf_conn -> nf_conn___init
> > Inserted/looked up nf_conn -> nf_conn
> > 
> > We can't pass e.g. nf_conn___init * to a function expecting nf_conn *.
> > The allocated nf_conn may not yet be fully initialized. It is only
> > after bpf_ct_insert_entry takes the nf_conn___init * and returns
> > inserted nf_conn * should it be allowed.
> 
> Yes. I know and agree with all of the above.
> 
> > But for the user in BPF C it will be the same nf_conn. The verifier
> > can enforce different semantics on the underlying type's usage in
> > kfuncs etc, while the user performs normal direct access to the
> > nf_conn.
> > 
> > It will be the same case here, except you also introduce the case of
> > kfuncs that are 'polymorphic' and can take both. Relaxing
> > 'strict_type_match' for that arg and placing the type of member you
> > wish to convert the pointer to gives you such polymorphism. But it's
> > not correct to do for nf_conn___init to nf_conn, at least not by
> > default.
> 
> Yes. Agree. I used unfortunate example in the previous reply with nf_conn___init.
> I meant to say:
> 
>  For definition:
>  struct nf_conn_init {
>     struct nf_conn ct;
>  };
>  if a kfunc accepts a pointer to nf_conn it should always accept a pointer to nf_conn_init
>  for both read and write, because in C that's valid and safe type cast.
> 
> Meainng that C rules apply.
> Our triple underscore is special, because it's the "same type".
> In the 2nd part of my reply I'm proposing to use the whole suffix "___init" to indicate that.
> I think you're arguing that just "___" part is enough to enforce strict match.
> Matching foo___flavor with foo should not be allowed.
> While passing struct foo_flavor {struct foo;} into a kfunc that accepts 'struct foo'
> is safe.
> If so, I'm fine with such approach.

Alright, I'll spin v2 to treat any type with name___.* as a disallowed
alias, and update the documentation to mention it. I was originally
going to push back and say that we should just use a single alias like
__nocast to keep things simple, but it doesn't feel generalizable
enough.



[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux