On Sun, Jan 1, 2023 at 12:34 AM Kumar Kartikeya Dwivedi
<memxor@xxxxxxxxx> wrote:
>
> Currently, the dynptr function is not checking the variable offset part
> of PTR_TO_STACK that it needs to check. The fixed offset is considered
> when computing the stack pointer index, but if the variable offset was
> not a constant (such that it could not be accumulated in reg->off), we
> will end up a discrepency where runtime pointer does not point to the
> actual stack slot we mark as STACK_DYNPTR.
>
> It is impossible to precisely track dynptr state when variable offset is
> not constant, hence, just like bpf_timer, kptr, bpf_spin_lock, etc.
> simply reject the case where reg->var_off is not constant. Then,
> consider both reg->off and reg->var_off.value when computing the stack
> pointer index.
>
> A new helper dynptr_get_spi is introduced to hide over these details
> since the dynptr needs to be located in multiple places outside the
> process_dynptr_func checks, hence once we know it's a PTR_TO_STACK, we
> need to enforce these checks in all places.
>
> Note that it is disallowed for unprivileged users to have a non-constant
> var_off, so this problem should only be possible to trigger from
> programs having CAP_PERFMON. However, its effects can vary.
>
> Without the fix, it is possible to replace the contents of the dynptr
> arbitrarily by making verifier mark different stack slots than actual
> location and then doing writes to the actual stack address of dynptr at
> runtime.
>
> Fixes: 97e03f521050 ("bpf: Add verifier support for dynptrs")
> Signed-off-by: Kumar Kartikeya Dwivedi <memxor@xxxxxxxxx>
> ---
> kernel/bpf/verifier.c | 83 ++++++++++++++-----
> .../bpf/prog_tests/kfunc_dynptr_param.c | 2 +-
> .../testing/selftests/bpf/progs/dynptr_fail.c | 6 +-
> 3 files changed, 66 insertions(+), 25 deletions(-)
>
> diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c
> index f7248235e119..ca970f80e395 100644
> --- a/kernel/bpf/verifier.c
> +++ b/kernel/bpf/verifier.c
> @@ -638,11 +638,34 @@ static void print_liveness(struct bpf_verifier_env *env,
> verbose(env, "D");
> }
>
> -static int get_spi(s32 off)
> +static int __get_spi(s32 off)
> {
> return (-off - 1) / BPF_REG_SIZE;
> }
>
> +static int dynptr_get_spi(struct bpf_verifier_env *env, struct bpf_reg_state *reg)
> +{
> + int off, spi;
> +
> + if (!tnum_is_const(reg->var_off)) {
> + verbose(env, "dynptr has to be at the constant offset\n");
> + return -EINVAL;
> + }
> +
> + off = reg->off + reg->var_off.value;
> + if (off % BPF_REG_SIZE) {
> + verbose(env, "cannot pass in dynptr at an offset=%d\n", reg->off);
s/reg->off/off/ ?
> + return -EINVAL;
> + }
> +
> + spi = __get_spi(off);
> + if (spi < 1) {
> + verbose(env, "cannot pass in dynptr at an offset=%d\n", (int)(off + reg->var_off.value));
s/(int)(off + reg->var_off.value)/off/?
> + return -EINVAL;
> + }
> + return spi;
> +}
> +
[...]
> @@ -2422,7 +2456,9 @@ static int mark_dynptr_read(struct bpf_verifier_env *env, struct bpf_reg_state *
> */
> if (reg->type == CONST_PTR_TO_DYNPTR)
> return 0;
> - spi = get_spi(reg->off);
> + spi = dynptr_get_spi(env, reg);
> + if (WARN_ON_ONCE(spi < 0))
> + return spi;
> /* Caller ensures dynptr is valid and initialized, which means spi is in
> * bounds and spi is the first dynptr slot. Simply mark stack slot as
> * read.
> @@ -5946,6 +5982,11 @@ static int process_kptr_func(struct bpf_verifier_env *env, int regno,
> return 0;
> }
>
> +static bool arg_type_is_release(enum bpf_arg_type type)
> +{
> + return type & OBJ_RELEASE;
> +}
> +
no need to move it?
> /* There are two register types representing a bpf_dynptr, one is PTR_TO_STACK
> * which points to a stack slot, and the other is CONST_PTR_TO_DYNPTR.
> *
> @@ -5986,12 +6027,14 @@ int process_dynptr_func(struct bpf_verifier_env *env, int regno,
> }
> /* CONST_PTR_TO_DYNPTR already has fixed and var_off as 0 due to
> * check_func_arg_reg_off's logic. We only need to check offset
> - * alignment for PTR_TO_STACK.
> + * and its alignment for PTR_TO_STACK.
> */
> - if (reg->type == PTR_TO_STACK && (reg->off % BPF_REG_SIZE)) {
> - verbose(env, "cannot pass in dynptr at an offset=%d\n", reg->off);
> - return -EINVAL;
> + if (reg->type == PTR_TO_STACK) {
> + err = dynptr_get_spi(env, reg);
> + if (err < 0)
> + return err;
> }
> +
> /* MEM_UNINIT - Points to memory that is an appropriate candidate for
> * constructing a mutable bpf_dynptr object.
> *
> @@ -6070,11 +6113,6 @@ static bool arg_type_is_mem_size(enum bpf_arg_type type)
> type == ARG_CONST_SIZE_OR_ZERO;
> }
>
> -static bool arg_type_is_release(enum bpf_arg_type type)
> -{
> - return type & OBJ_RELEASE;
> -}
> -
> static bool arg_type_is_dynptr(enum bpf_arg_type type)
> {
> return base_type(type) == ARG_PTR_TO_DYNPTR;
> @@ -6404,8 +6442,9 @@ static u32 dynptr_ref_obj_id(struct bpf_verifier_env *env, struct bpf_reg_state
why not make dynptr_ref_obj_id return int and <0 on error? There seems
to be just one place where we call dynptr_ref_obj_id and we can check
and report error there
>
> if (reg->type == CONST_PTR_TO_DYNPTR)
> return reg->ref_obj_id;
> -
> - spi = get_spi(reg->off);
> + spi = dynptr_get_spi(env, reg);
> + if (WARN_ON_ONCE(spi < 0))
> + return U32_MAX;
> return state->stack[spi].spilled_ptr.ref_obj_id;
> }
>
[...]
