Re: [RFC][PATCH v2 2/7] bpf: Mark ALU32 operations in bpf_reg_state structure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Dec 12, 2022 at 4:45 AM Roberto Sassu
<roberto.sassu@xxxxxxxxxxxxxxx> wrote:
>
> On Sat, 2022-12-10 at 18:28 -0800, Alexei Starovoitov wrote:
> > On Wed, Dec 7, 2022 at 9:25 AM Roberto Sassu
> > <roberto.sassu@xxxxxxxxxxxxxxx> wrote:
> > > From: Roberto Sassu <roberto.sassu@xxxxxxxxxx>
> > >
> > > BPF LSM needs a reliable source of information to determine if the return
> > > value given by eBPF programs is acceptable or not. At the moment, choosing
> > > either the 64 bit or the 32 bit one does not seem to be an option
> > > (selftests fail).
> > >
> > > If we choose the 64 bit one, the following happens.
> > >
> > >       14:       61 10 00 00 00 00 00 00 r0 = *(u32 *)(r1 + 0)
> > >       15:       74 00 00 00 15 00 00 00 w0 >>= 21
> > >       16:       54 00 00 00 01 00 00 00 w0 &= 1
> > >       17:       04 00 00 00 ff ff ff ff w0 += -1
> > >
> > > This is the last part of test_deny_namespace. After #16, the register
> > > values are:
> > >
> > > smin_value = 0x0, smax_value = 0x1,
> > > s32_min_value = 0x0, s32_max_value = 0x1,
> > >
> > > After #17, they become:
> > >
> > > smin_value = 0x0, smax_value = 0xffffffff,
> > > s32_min_value = 0xffffffff, s32_max_value = 0x0
> > >
> > > where only the 32 bit values are correct.
> > >
> > > If we choose the 32 bit ones, the following happens.
> > >
> > > 0000000000000000 <check_access>:
> > >        0:       79 12 00 00 00 00 00 00 r2 = *(u64 *)(r1 + 0)
> > >        1:       79 10 08 00 00 00 00 00 r0 = *(u64 *)(r1 + 8)
> > >        2:       67 00 00 00 3e 00 00 00 r0 <<= 62
> > >        3:       c7 00 00 00 3f 00 00 00 r0 s>>= 63
> > >
> > > This is part of test_libbpf_get_fd_by_id_opts (no_alu32 version). In this
> > > case, 64 bit register values should be used (for the 32 bit ones, there is
> > > no precise information from the verifier).
> > >
> > > As the examples above suggest that which register values to use depends on
> > > the specific case, mark ALU32 operations in bpf_reg_state structure, so
> > > that BPF LSM can choose the proper ones.
> >
> > I have a hard time understanding what is the problem you're
> > trying to solve and what is the proposed fix.
>
> The problem is allowing BPF LSM programs to return positive values when
> LSM hooks expect zero or negative values. Those values could be
> converted to a pointer, and escape the IS_ERR() check.

The bigger goal is clear.

> The challenge is to ensure that the verifier prediction of R0 is
> accurate, so that the eBPF program is not unnecessarily rejected.

There is a code in the verifier already that checks ret values.
lsm restrictions should fit right in.

> > The patch is trying to remember the bitness of the last
> > operation, but what for?
> > The registers are 64-bit. There are 32-bit operations,
> > but they always update the upper 32-bits of the register.
> > reg_bounds_sync() updates 32 and 64 bit bounds regardless
> > whether the previous operation was on 32 or 64 bit.
>
> Ok, yes. I also thought that using the 64 bit register should be ok,
> but selftests fail.

maybe selftests are buggy?
they fail with patch 3 alone without patch 2 ?
please explain exactly the problem.

> Regarding your comment, I have not seen reg_bounds_sync() for the case
> R = imm.

because it's unnecessary there.

> > It seems you're trying to hack around something that breaks
> > patch 3 which also looks fishy.
>
> I thought it was a good idea that changes in the LSM infrastructure are
> automatically reflected in the boundaries that BPF LSM should enforce.

That's fine. Encoding restrictions in lsm_hook_defs.h
is the cleanest approach.

> If not, I'm open to new ideas. If we should use BTF ID sets, I'm fine
> with it.
>
> > Please explain the problem first with a concrete example.
>
> Ok, I have a simple one:
>
> $ llvm-objdump -d test_bpf_cookie.bpf.o
>
> 0000000000000000 <test_int_hook>:
>
> [...]
>
>        8:       85 00 00 00 0e 00 00 00 call 14
>        9:       b4 06 00 00 ff ff ff ff w6 = -1
>       10:       5e 08 07 00 00 00 00 00 if w8 != w0 goto +7 <LBB11_3>
>       11:       bf 71 00 00 00 00 00 00 r1 = r7
>       12:       85 00 00 00 ae 00 00 00 call 174
>       13:       18 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 r1 = 0 ll
>       15:       79 12 00 00 00 00 00 00 r2 = *(u64 *)(r1 + 0)
>       16:       4f 02 00 00 00 00 00 00 r2 |= r0
>       17:       7b 21 00 00 00 00 00 00 *(u64 *)(r1 + 0) = r2
>
> smin_value = 0xffffffff, smax_value = 0xffffffff,
> s32_min_value = 0xffffffff, s32_max_value = 0xffffffff,

and this applies where?
what reg are you talking about?
Where is the issue?

> This is what I see at the time the BPF LSM check should be done.
>
> How this should be properly handled?

The patch 3 should be fine alone. I don't see a need for patch 2 yet.



[Index of Archives]     [Linux Samsung SoC]     [Linux Rockchip SoC]     [Linux Actions SoC]     [Linux for Synopsys ARC Processors]     [Linux NFS]     [Linux NILFS]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite News]     [Linux Kernel]     [Linux SCSI]


  Powered by Linux