From: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
Date: Wed, 16 Nov 2022 21:55:57 +0100
> The 11/16/2022 16:34, Alexander Lobakin wrote:
> >
> > From: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
> > Date: Tue, 15 Nov 2022 22:44:55 +0100
>
> Hi Olek,
Hi!
>
> >
> > Extend lan966x XDP support with the action XDP_TX. In this case when the
> > received buffer needs to execute XDP_TX, the buffer will be moved to the
> > TX buffers. So a new RX buffer will be allocated.
> > When the TX finish with the frame, it would release completely this
> > buffer.
> >
> > Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx>
> > ---
> > .../ethernet/microchip/lan966x/lan966x_fdma.c | 78 +++++++++++++++++--
> > .../ethernet/microchip/lan966x/lan966x_main.c | 4 +-
> > .../ethernet/microchip/lan966x/lan966x_main.h | 8 ++
> > .../ethernet/microchip/lan966x/lan966x_xdp.c | 8 ++
> > 4 files changed, 91 insertions(+), 7 deletions(-)
> >
> > diff --git a/drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c b/drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c
> > index 384ed34197d58..c2e56233a8da5 100644
> > --- a/drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c
> > +++ b/drivers/net/ethernet/microchip/lan966x/lan966x_fdma.c
> > @@ -394,13 +394,21 @@ static void lan966x_fdma_tx_clear_buf(struct lan966x *lan966x, int weight)
> > dcb_buf->dev->stats.tx_bytes += dcb_buf->len;
> >
> > dcb_buf->used = false;
> > - dma_unmap_single(lan966x->dev,
> > - dcb_buf->dma_addr,
> > - dcb_buf->len,
> > - DMA_TO_DEVICE);
> > - if (!dcb_buf->ptp)
> > + if (dcb_buf->skb)
> > + dma_unmap_single(lan966x->dev,
> > + dcb_buf->dma_addr,
> > + dcb_buf->len,
> > + DMA_TO_DEVICE);
> > +
> > + if (dcb_buf->skb && !dcb_buf->ptp)
> > dev_kfree_skb_any(dcb_buf->skb);
> >
> > + if (dcb_buf->page) {
> > + page_pool_release_page(lan966x->rx.page_pool,
> > + dcb_buf->page);
> > + put_page(dcb_buf->page);
> > + }
> >
> > Hmm, that's not really correct.
> >
> > For skb, you need to unmap + free, true (BPW, just use
> > napi_consume_skb()).
>
> What does BPW stand for?
Sorry, it was a typo <O> I meant BTW / "by the word" (or "by the
way").
> Yes, I can use napi_consume_skb instead of dev_kfree_skb_any();
>
> > For %XDP_TX, as you use Page Pool, you don't need to unmap, but you
> > need to do xdp_return_frame{,_bulk}. Plus, as Tx is being done here
> > directly from an Rx NAPI polling cycle, xdp_return_frame_rx_napi()
> > is usually used. Anyway, each of xdp_return_frame()'s variants will
> > call page_pool_put_full_page() for you.
>
> If I understand correctly this part that you describe, the page will
> be added back in the page_pool cache. While in my case, I am giving
> back the page to the page allocator. In this way the page_pool needs
> to allocate more pages every time when the action XDP_TX is happening.
>
> BTW, this shows that there is a missing xdp_rxq_info_reg_mem_model call,
> because when calling xdp_return_frame_rx_napi, the frame was not going
> to page_pool but the was simply freed because xdp_mem_info was the wrong
> type.
Correct!
>
> > For %XDP_REDIRECT, as you don't know the source of the XDP frame,
>
> Why I don't know the source?
> Will it not be from an RX page that is allocated by Page Pool?
Imagine some NIC which does not use Page Pool, for example, it does
its own page allocation / splitting / recycling techniques, gets
%XDP_REDIRECT when running XDP prog on Rx. devmap says it must
redirect the frame to your NIC.
Then, your ::ndo_xdp_xmit() will be run on a frame/page not
belonging to any Page Pool.
The example can be any of Intel drivers (there are plans to switch
at least i40e and ice to Page Pool, but they're always deeply in
the backlogs (clownface)).
>
> > you need to unmap it (as it was previously mapped in
> > ::ndo_xdp_xmit()), plus call xdp_return_frame{,_bulk} to free the
> > XDP frame. Note that _rx_napi() variant is not applicable here.
> >
> > That description might be confusing, so you can take a look at the
> > already existing code[0] to get the idea. I think this piece shows
> > the expected logics rather well.
>
> I think you forgot to write the link to the code.
> I looked also at different drivers but I didn't figure it out why the
> frame needed to be mapped and where is happening that.
Ooof, really. Pls look at the end of this reply :D
On ::ndo_xdp_xmit(), as I explained above, you can receive a frame
from any driver or BPF core code (such as cpumap), and BPF prog
there could be run on buffer of any kind: Page Pool page, just a
page, a kmalloc() chunk and so on.
So, in the code[0], you can see the following set of operations:
* DMA unmap in all cases excluding frame coming from %XDP_TX (then
it was only synced);
* updating statistics and freeing skb for skb cases;
* xdp_return_frame_rx_napi() for %XDP_TX cases;
* xdp_return_frame_bulk() for ::ndo_xdp_xmit() cases.
>
> >
> > +
> > clear = true;
> > }
> >
> > @@ -532,6 +540,9 @@ static int lan966x_fdma_napi_poll(struct napi_struct *napi, int weight)
> > lan966x_fdma_rx_free_page(rx);
> > lan966x_fdma_rx_advance_dcb(rx);
> > goto allocate_new;
> > + case FDMA_TX:
> > + lan966x_fdma_rx_advance_dcb(rx);
> > + continue;
> > case FDMA_DROP:
> > lan966x_fdma_rx_free_page(rx);
> > lan966x_fdma_rx_advance_dcb(rx);
> > @@ -653,6 +664,62 @@ static void lan966x_fdma_tx_start(struct lan966x_tx *tx, int next_to_use)
> > tx->last_in_use = next_to_use;
> > }
> >
> > +int lan966x_fdma_xmit_xdpf(struct lan966x_port *port,
> > + struct xdp_frame *xdpf,
> > + struct page *page)
> > +{
> > + struct lan966x *lan966x = port->lan966x;
> > + struct lan966x_tx_dcb_buf *next_dcb_buf;
> > + struct lan966x_tx *tx = &lan966x->tx;
> > + dma_addr_t dma_addr;
> > + int next_to_use;
> > + __be32 *ifh;
> > + int ret = 0;
> > +
> > + spin_lock(&lan966x->tx_lock);
> > +
> > + /* Get next index */
> > + next_to_use = lan966x_fdma_get_next_dcb(tx);
> > + if (next_to_use < 0) {
> > + netif_stop_queue(port->dev);
> > + ret = NETDEV_TX_BUSY;
> > + goto out;
> > + }
> > +
> > + /* Generate new IFH */
> > + ifh = page_address(page) + XDP_PACKET_HEADROOM;
> > + memset(ifh, 0x0, sizeof(__be32) * IFH_LEN);
> > + lan966x_ifh_set_bypass(ifh, 1);
> > + lan966x_ifh_set_port(ifh, BIT_ULL(port->chip_port));
> > +
> > + dma_addr = page_pool_get_dma_addr(page);
> > + dma_sync_single_for_device(lan966x->dev, dma_addr + XDP_PACKET_HEADROOM,
> > + xdpf->len + IFH_LEN_BYTES,
> > + DMA_TO_DEVICE);
> >
> > Also not correct. This page was mapped with %DMA_FROM_DEVICE in the
> > Rx code, now you sync it for the opposite.
> > Most drivers in case of XDP enabled create Page Pools with ::dma_dir
> > set to %DMA_BIDIRECTIONAL. Now you would need only to sync it here
> > with the same direction (bidir) and that's it.
>
> That is a really good catch!
> I was wondering why the things were working when I tested this. Because
> definitely, I can see the right behaviour.
The reasons can be:
1) your platform might have a DMA coherence engine, so that all
those DMA sync calls are no-ops;
2) on your platform, DMA writeback (TO_DEVICE) and DMA invalidate
(FROM_DEVICE) invoke the same operation/instruction. Some
hardware is designed that way, that any DMA sync is in fact a
bidir synchronization;
3) if there were no frame modification from the kernel, e.g. you
received it and immediately sent, cache was not polluted with
some pending modifications, so there was no work for writeback;
4) probably something else I might've missed.
>
> >
> > +
> > + /* Setup next dcb */
> > + lan966x_fdma_tx_setup_dcb(tx, next_to_use, xdpf->len + IFH_LEN_BYTES,
> > + dma_addr + XDP_PACKET_HEADROOM);
> > +
> > + /* Fill up the buffer */
> > + next_dcb_buf = &tx->dcbs_buf[next_to_use];
> > + next_dcb_buf->skb = NULL;
> > + next_dcb_buf->page = page;
> > + next_dcb_buf->len = xdpf->len + IFH_LEN_BYTES;
> > + next_dcb_buf->dma_addr = dma_addr;
> > + next_dcb_buf->used = true;
> > + next_dcb_buf->ptp = false;
> > + next_dcb_buf->dev = port->dev;
> > +
> > + /* Start the transmission */
> > + lan966x_fdma_tx_start(tx, next_to_use);
> > +
> > +out:
> > + spin_unlock(&lan966x->tx_lock);
> > +
> > + return ret;
> > +}
> > +
> > int lan966x_fdma_xmit(struct sk_buff *skb, __be32 *ifh, struct net_device *dev)
> > {
> > struct lan966x_port *port = netdev_priv(dev);
> > @@ -709,6 +776,7 @@ int lan966x_fdma_xmit(struct sk_buff *skb, __be32 *ifh, struct net_device *dev)
> > /* Fill up the buffer */
> > next_dcb_buf = &tx->dcbs_buf[next_to_use];
> > next_dcb_buf->skb = skb;
> > + next_dcb_buf->page = NULL;
> > next_dcb_buf->len = skb->len;
> > next_dcb_buf->dma_addr = dma_addr;
> > next_dcb_buf->used = true;
> >
> > [...]
> >
> > --
> > 2.38.0
> >
> > Thanks,
> > Olek
>
> --
> /Horatiu
[0] https://elixir.bootlin.com/linux/v6.1-rc5/source/drivers/net/ethernet/marvell/mvneta.c#L1882
Thanks,
Olek
